golfdiesel

Joined: 12th January 2006

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

golfdiesel
I picked up my MZ-10 to play a little with it only to discover that it had died on me. One of the motors had a broken sprocket.
So I took the oportunity to take the thing apart to see how it is constructed.
I must say that it is one of the most complex constructions I have ever opened up.
When I came to the exposure meter (I didn't know that it sits just above the viewfinder eyepiece). I removed it and the collimator lens.
The MZ-10 has a center weighted 6 segmented metering system but when you look at the meter itself you see that it has 9 segements and even has a circular part for spot metering which was only available on the more expensive camera's in the range. I wonder how many parts the camera's in the MZ range share with each other.

All in all a nice way to spend an hour on a saturday afternoon
I just keep wondering how complex a DSLR will be compared to this. In the MZ range everything is placed on flexible PCB's whilst the DSLR's will probably have a main board behind the sensor assembly.

Comment by golfdiesel posted on Dead MZ-10 at 30/05/2009 - 17:52

golfdiesel
The *ist-DS and the *ist-D had correct metering to my knowledge. The newer camera's sometimes had some problems with metering.

Partly the problems are caused by the fact that Pentax crippled the KAF2 mount so that the camera does not know at which aperture the lens it when attached. They removed a lever from the mount to save cost.
That is why they introduced stop down metering in the cameras so the camera briefly stops down and then performs the measurements. I don't know why this worked better on the *ist-D and *ist-DS though.

Comment by golfdiesel posted on Two K7 questions at 30/05/2009 - 13:15

golfdiesel
You can only use this lens in full manual mode.
Set the dial to M and set the aperture setting to the aperture that the mirror lens has (mostly they are f.
Then you select the shutterspeed that you want for the correct exposure.

It helps if you could post the specs of the lens (make, model, focal length, f-number, etc)

Comment by golfdiesel posted on Mirror lens at 29/05/2009 - 21:46

golfdiesel
CraigF1969 wrote:
golfdiesel wrote:

Can you enlighten us on what the Trading Standards people told us?
Will give the other parties a chance to respond, wouldnt be fair on them as they might very well be more than willing to resolve the issue.
And allready some news?

Comment by golfdiesel posted on So What Would You Do if You Were Me? at 29/05/2009 - 20:53

golfdiesel
The SR system makes sound when you tilt the camera, that is correct.
There is allso a orientation sensor which detects if you are holding the camera horizontal or vertical.

Comment by golfdiesel posted on K200D SR (Internal Movement) at 28/05/2009 - 20:20

golfdiesel
AVI is only a container.
It depends on the codec used if a program can work with it.

Comment by golfdiesel posted on Am I the only Pentaxian who is also a computer geek? at 28/05/2009 - 19:50

golfdiesel
shim wrote:

The next thing will be lists comparing the video facilities
offered by Pentax -v- Nikon -v- Canon
shim
Ah well, that gives the pixel peepers something to do in the next couple of years

Comment by golfdiesel posted on No AF in K-7 for video at 27/05/2009 - 19:49

golfdiesel
Have fun Fi!
I just looked at your website, you seem to like bright colours a lot

Comment by golfdiesel posted on New Pentax for FI!!! at 27/05/2009 - 19:47

golfdiesel
Here is another nice website with a lot of additional information on the Zeiss 0.7 lens and some other lenses which use the same technique.
I see no way why Pentax should not be able to produce a f1.0 lens after I read this website. The only downside would be the price. It will have a very high price I think.

Website (translated by Babelfish)

Comment by golfdiesel posted on New roadmap? at 27/05/2009 - 17:31

golfdiesel
Anvh wrote:
I believe f-number is relative to the width of the beam of light.
So if you place the diaphragm at the place were the beam of light is add his smallest width you don't need a large aperture.

That's one of the trick you can do but the very basic of the f-number is focal length devided by lens diameter and you can't change that.

Focal length devided by diamter is so far as I know only applyable this simple with a single lens system
This is true unless you resort to the trickery which Zeiss used by incorporating a condenser like they did with their f/0.7 lens.

Comment by golfdiesel posted on New roadmap? at 27/05/2009 - 17:21

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo