All Forum Comments
Comment by golfdiesel posted on Curved Widescreen at 06/06/2009 - 22:47
A "normal" 30" display has a resolution of: 2,560 x 1,600
So you loose 320 pixels on the horizontal axis but you gain 700 pixels in the vertical axis. I would rather have a 30" display with 2560x1600 then a 43" with 2880x900 pixels.
And it is a lot cheaper as well... 30" TFT's go between 1000 and 3800 Euros
Comment by golfdiesel posted on Curved Widescreen at 06/06/2009 - 22:06
Do you take VAT and possibly lower import duties into account?
Comment by golfdiesel posted on Prices on the Pentax X70 at 06/06/2009 - 21:59
A NEC representative said the CRV43 uses a "new and unique adaptation" of Digital Light Processing (DLP) technology where four DLP light engines create a single on-screen image.
Comment by golfdiesel posted on Curved Widescreen at 06/06/2009 - 21:39
TFT screens are a lot brighter then CRT's.
My TFT is at 15,6% brightness and 80% contrast.
When used at 100% brightness your eyes burn out
I adjust the brightness to 120 cd/m2 (120 nit)
The screen I have has a maximum brightness of 470 cd/m2. In comparison, my laptop which is specially designed for outside use has a 1000 cd/m2 brightness screen (to be able to use it in sunlight)
Comment by golfdiesel posted on Who calibrates their screen at 06/06/2009 - 21:34
My display for example has it's biggest problem in the blue area.
This is where real profiling with a colorimeter or spectrometer comes into play.
Triggered by Matt's post about using argyllcms I downloaded it and the corresponding GUI (dispcalgui) and a profiling job is running at this moment. It takes a very long time compared to the software that came with my Eye-one display 2 but it uses a lot more different colout patches to check the display so it will probably iron out more of the errors the display has.
I used the maximum number of patches and the highest quality profile and at this moment it is testing using 3012 patches after profiling with a huge amount of patches as well
Comment by golfdiesel posted on Who calibrates their screen at 06/06/2009 - 15:09
CRT Cathode ray tube
TFT Thin-film transistor
TN twisted nematic
IPS in-plane switching
MVA multi-domain vertical alignment
PVA patterned vertical alignment
FED field emission display
SED surface-conduction electron-emitter display
LUT Lookup table
Hmmm I don't think it's very usefull Womble
I can read the words but do not know what they mean. I think I’ll leave it to the expert
http://www.tftcentral.co.uk/articles/panel_technologies.htm
Comment by golfdiesel posted on Who calibrates their screen at 06/06/2009 - 14:13
See my sig for the list.
In addition to that there is a set of filters, tripod, lightmeter, expodisc.
Now that I shoot digital I take more with me then before...
The last holiday with a film camera I took a MZ-10 with a 35-80 and the 80-200 with me.
Before that it was a Carena sx300 with a 28, 50 and 135mm lens.
The reason I take more with me now is that I experiment more then I did with film.
Comment by golfdiesel posted on Camera gear, and holidays abroad in the early 1970's. at 03/06/2009 - 13:39
I think there are maybe only two Pentax 35mm film bodies that can use lenses with no aperture ring, the MZ-6 (ZX-L in the US) and the *ist. If there are any others they'll be late in the MZ/ZX series. Even the flagship MZ-S can't set an aperture from the body and so can't use the aperture ring-less lenses.
G
Comment by golfdiesel posted on New roadmap? at 02/06/2009 - 20:47
There are some people here who can give some great advice on what to buy.
Comment by golfdiesel posted on Hello, I'm Jacko. at 02/06/2009 - 20:44


Think about two of those side by side as a dual monitor setup