George Lazarette

Joined: 14th January 2004

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

George Lazarette
I have both types, and I prefer the "cloth" ones. They have the advantage that they will fit most flashguns.

Neither is remotely as good as a proper softbox, but they are a lot better than nothing.

I think the best cheap(ish) flashgun diffuser I have used was a Lumiquest product, which unfortunately has disappeared. When I find one at a reasonable price I shall probably buy this:

http://www.lumiquest.com/lq951.htm

G

PS: The set you are looking at is very good value for money.

Comment by George Lazarette posted on Omni bounce diffuser at 21/11/2007 - 20:30

George Lazarette
You've answered your own question.

"Bouncing" light means reflecting it - usually off a white ceiling, or occasionally, a wall or some other reflecting surface. That's why it only works indoors.

Unless, of course, a big white bird just happens to pass by overhead at the precise moment you press the shutter. But you can't depend on that happening.

Diffusers point the light directly at the subject, so no reflecting surface is required.

Some flash attachments combine both direct flash (diffused or not) with bounce flash. Again, without a well-timed big white bird, the bounce part won't work outdoors. Others include a reflecting surface as part of the assemblage, so they WILL bounce anywhere.

Of course, the purpose of bouncing is primarily to diffuse.

G

Comment by George Lazarette posted on Omni bounce diffuser at 21/11/2007 - 09:57

George Lazarette
Quote:
Very interesting. I'll be taking a close look at that.

Thanks very much.

I wonder if I can make it understand .pefs.
My new toy pc has a program called Gwenview. This contains a Raw Image Converter, which looked promising until I presented it with a PEF.

Quote: Failed to identify Raw Image
DCRAW command line: dcraw -c -i IMGP5119.PEF Cannot decode IMGP5119.PEF

So it seems to be using DCRAW, which I thought could handle PEFs from the K10D.

And if it has access to DCRAW, does that mean it's already installed?

Strange.

G

Comment by George Lazarette posted on How do you organise your photos? at 26/11/2007 - 22:13

George Lazarette
Your best bet is probably to buy another M 50mm. Then you'll have a dedicated macro version, and an everyday walking-around one.

G

Comment by George Lazarette posted on help - lens stuck at 20/11/2007 - 12:18

George Lazarette
I can't think how the aperture ring can have any bearing on your being unable to get the lens off the tube. You don't have a young son with a fondness for super-glue, by any chance?

Is the little lever that operates the locking pin on the tube stuck? Or broken? If you can feel it move up and down, I should be prepared to use a reasonable amount of force to twist the lens anti-clockwise.

G

Comment by George Lazarette posted on help - lens stuck at 19/11/2007 - 19:55

George Lazarette
Quote:
Thanks for the links - very helpful.

the second link states the FA 1.4 stopped production in 2004 though, I have just seen one onsale brand new - I'm guessing they've started remanufacturing again ?

simon
Like the real bible, these are not infallible.

But I also think that Pentax may have rethought its policy on phasing out the 50 1.4.

G

Comment by George Lazarette posted on Another lens question - 50MM portrait prime this time at 19/11/2007 - 21:49

George Lazarette
Simon,

I think you need to know about the two bibles of the Pentax K-mount world.

http://stans-photography.info/

http://www.bdimitrov.de/kmp/

G

Comment by George Lazarette posted on Another lens question - 50MM portrait prime this time at 19/11/2007 - 19:59

George Lazarette
Matt,

I was assuming (wrongly) that the OP had acquired a flash unit compatible with the K10D. Your reference to 5p kit reinforced that misapprehension.

On re-reading, I see that he in fact bought the much earlier 240Z, which not only doesn't have a 5p socket, or even a 4p socket, but can only be used manually with the K10D.

That being the case, a more economical option than cables would be a flash sensor.

http://preview.tinyurl.com/ypn4c4

G

By the way, the 240Z is a nice little unit.

Comment by George Lazarette posted on flash lead at 19/11/2007 - 19:48

George Lazarette
Actually, Matt, the 240 has a sync socket, so the off-camera adapter is not needed.

Also, the Adapter Fg is required if you want to use the built-in flash as well as the 240. If not, the ordinary Adapter F is fine.

G

Comment by George Lazarette posted on flash lead at 19/11/2007 - 14:34

George Lazarette
Quote:
niblue wrote:
This one of my wife on the trampoline in our garden being an example:
Thank heavens she was on the way up...
You are a bad man, Christopher.

G

Comment by George Lazarette posted on Wide angle options ? at 22/11/2007 - 18:24

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo