Frogherder

Joined: 19th February 2009

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

Frogherder
My K10D started taking pics with imgp0001 and shutter count 332
The latest shot was imgp8701 and shutter count 9059 an increase of 26 counts

My K5 started with imgp0001 and shutter count 1
curiously the last shot was imgp1204 and shutter count 1203 a loss of 1 count.

Both cameras arrived in sealed boxes and have had no alterations to image numbering by me.

regards
Bernard

Comment by Frogherder posted on Testing a new camera and lens - what to look for? at 16/05/2012 - 12:20

Frogherder
I would endorse the comments made above but question what your ideas on macro are.

For insects and such getting too close could be a problem so a higher focal length is an advantage.

For static items (coins, stamps and the like) 50mm + extension tubes/bellows should be fine.

On a really tight budget it might be worth considering M42 lenses plus M42-PK adapter.
M42 extension rings and bellows are considerably cheaper than PK versions

Downside - everything is then manual, but this may not matter too much (see previous comments).
Upside - these lenses are much cheaper and with the right use can be just as good.

regards
Bernard

Edit. No ones mentioned lighting, so maybe a perusal of some of Charlottes threads might give you some ideas of lighting close oblects

Comment by Frogherder posted on budget macro lens at 16/05/2012 - 12:03

Frogherder
[IMG]http://i1236.photobucket.com/albums/ff444/Frogherder/IMGP1203a.jpg[/IMG]

[IMG]http://i1236.photobucket.com/albums/ff444/Frogherder/IMGP1204a.jpg[/IMG]

Hi All,

I've just aquired a Fujinon 55mm 1.8 M42 lens with a view to using on my K10.

On the outside there are 6 tiny screws which are pointed. The front set indicated by he red arrow in pic #1 release the front cowling, which is screwed in. On removal there is a silvery ring screwed down, which appears to hold the front elements (I've not touched this)

The back set red arrow 'A' are also pointed but after removal nothing appears to be loose.

I've filed off a small tab red arrow 'B' as this prevent location in a Pentax camera (using a suitable M42-PK adapter)

Not sure what the slot and hole do (cirled in yellow). Possible that a C spanner is required? Maybe a location, but in addition to the tab???

After this rambling preamble does any one know how to get inside this lens so that I can disable the pin actuator thus enabling me to use the lens manually

regards
Bernard

Comment by Frogherder posted on M42 Fujinon Lens at 16/05/2012 - 11:51

Frogherder
Thanks Alan, I can see the logic now.

Sky looks ominous this morning so I'll go out and have a go later, when I've done all me jobs, probably about noon (hopefully its not tipping it down by then).

It's going to be jolly difficult choosing the right grad for the job - I've only got one so far.

regards
Bernard

Comment by Frogherder posted on Grad ND advise at 16/05/2012 - 09:35

Frogherder
Thanks guys, I frequently use manual when the camera is on a tripod (I wasn't thinking I suppose). So in a sense it serves me right for not being too critical in the field.


Sorry to belabour the metering but,
If I meter the grass with the filter out (or at least through the 'thin' bit) the sky will be blown out, so putting the 'thick' bit over the sky darkens it up again -- happy with that.

If I meter the sky through the 'thick' bit anything then seen through the 'thin' bit will be much lighter -- This is were I'm still puzzled as the grass patently wasn't lighter


Stan the filter & holder are from Premier - Kood P series. I thought it was time that I tried out grads but felt I couldn't justify very expensive ones until I know why I need them. They are plastic so I suppose by the time I've got scrathes on them I should've figured it out

regards
Bernard

Comment by Frogherder posted on Grad ND advise at 15/05/2012 - 20:21

Frogherder
All as per JAK, plus somewhere dust free to hang the negs out to dry


regards
Bernard

Comment by Frogherder posted on Scanning film on a normal flatbed scanner at 15/05/2012 - 20:06

Frogherder
Quote:
I'll try not to bore you with too many.
Just keep 'em coming. I for one think they're something to aspire to (but I can't get the little critter to walk through the superglue)

We'll soon let you know when we're bored.

regards
Bernard

Comment by Frogherder posted on Some Macros from the last few days. at 15/05/2012 - 20:03

Frogherder
David - Thanks, I'll have to try again another day - weather here today is missly rain and total grey overcast so today is clearly out.

Alan - So do I meter without the grad in place? I did 1/2 press followed by AE-L and got a beep. Repositioned camera, then got another beep when I pressed the shutter again to take the pic and heard the focus shift, then shot taken. I'm clearly missing something as when I meter through a plain ND4 I get what I expect.


Smeggy - I'm trying to avoid PP, I'm not very good at it and I would rather get it 'right' if I can. But I take your point, for some it will be easier.

regards
Bernard

Comment by Frogherder posted on Grad ND advise at 15/05/2012 - 08:15

Frogherder
What shutter speed did you need to stop the blades

Bernard

Comment by Frogherder posted on Renewable Energy at 14/05/2012 - 23:08

Frogherder
If I spent £6000 on any camera, I'd expect a man to come and use it for me, but more likely - My wife would be a widow



Bernard

Comment by Frogherder posted on If I had £6000 I would buy this at 14/05/2012 - 22:56

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo