Scanning film on a normal flatbed scanner

Jonathan-Mac
Posted 15/05/2012 - 19:47 Link
Hi,

As I've recently started shooting film as well as digital, I'm looking for the best and cheapest way of developing & scanning or printing the images. So far I have a roll of Portra 400 developed and printed and scanned at fairly low resolution. In Madrid (where I live) this costs around €20 a roll, which is prohibitive, and more for black & white.

I can't scan the colour negatives on my normal flabed scanner as they come out very brown and even inverting the colours they are very light blue. The resolution goes up to 4800 so that shouldn't be a problem. Is there any way to process the scans to get them to look like normal photos?

Can I scan my own black & white negatives if they're developed? Obviously there would be no colour cast (or not one I couldn't remove), so I was hoping that would be easier.

Many thanks
Pentax hybrid user - Digital K3, film 645 and 35mm SLR and Pentax (&other) lenses adapted to Fuji X and Panasonic L digital
Fan of DA limited and old manual lenses
johnc765
Posted 15/05/2012 - 19:53 Link
There are dedicated film scanners or a Flatbed and film scanners available. Prices vary but to give you a hint.

link

or

link

you may be able to rig something up for your own scanner along the lines of whats in that video
Edited by johnc765: 15/05/2012 - 19:57
womble
Posted 15/05/2012 - 19:58 Link
I assume your scanner has an illuminated lid for scanning slides and negs? Normally the software that comes with the scanner has basic adjustments for most things. Photoshop and also invert a negative into a positive.

Best wishes, Kris.
Kris Lockyear
It is an illusion that photos are made with the camera… they are made with the eye, heart and head. Henri Cartier-Bresson
Lots of film bodies, a couple of digital ones, too many lenses (mainly older glass) and a Horseman LE 5x4.
JAK
Posted 15/05/2012 - 20:03 Link
Developing a black and white film isn't too complicated. All you need is a developing tank, thermometer, some developer, fixer and stop bath (optional.) Plenty of rinsing water and maybe somewhere dark to load the film if it isn't a daylight loading tank such as Agfa's Rondinax.

For colour you would need to purchase a C41 developing kit for most current negative films (C-22 for much older ones.) These aren't particularly cheap and it might still prove easiest in the long run to get the film processed in a lab.

I'm pretty sure most current photo software should be able to balance out the orange film mask on colour negative films (eg even the software that came with the scanner?) While I'm sure you would get OK scans from your normal flatbed, a dedicated film scanner would be better.

John
John K
Frogherder
Posted 15/05/2012 - 20:06 Link
All as per JAK, plus somewhere dust free to hang the negs out to dry


regards
Bernard
johnc765
Posted 15/05/2012 - 20:13 Link
Just had a thought, when viewing negatives whether colour or black and white there is always a light source behind the image. As womble asked about a light source in the lid, if you do not have one would placing a mirror or tin foil over the negative and using the scanners light source have the same effect?

I do not have any negatives to try this out myself so can't say for sure if its feasible
Hardgravity
Posted 15/05/2012 - 21:21 Link
johnc765 wrote:
Just had a thought, when viewing negatives whether colour or black and white there is always a light source behind the image. As womble asked about a light source in the lid, if you do not have one would placing a mirror or tin foil over the negative and using the scanners light source have the same effect?

I do not have any negatives to try this out myself so can't say for sure if its feasible
No.

I've tried and ended up buying a cheap negative scanner from Maplins like this LINK.

Although not high resolution, 5mp I think, these are affordable and easy to use, although the quality can be variable. If you get serious then you could move up market.

As for developing B&W film, the AGFA Rondinax mentioned earlier is spot on. 60 odd year old technology still work!

If you want to shoot B&W film to develop yourself try this company, I have and they're OK
Cheers, HG

K110+DA40, K200+DA35, K3 and a bag of lenses, bodies and other bits.

Mustn't forget the Zenits, or folders, or...

PPG entries.

Add Comment

To leave a comment - Log in to Pentax User or create a new account.



Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo