Frogherder

Joined: 19th February 2009

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

Frogherder
Again it would need access to someone with an engineering workshop but

I would be tempted to have the remaining two spigots cut off and the face skimmed flat on a lathe then

Take a short length of steel tubing and have a disc welded onto the end.
Have the diameter skimmed to the original diameter of the spigots (looks as if this is about 30mm). Do the slots between the spigots do anything - if not ignore them)
Whilst it is in the lathe locate a 8/10mm clearance hole (is that the diameter of the large screw?) in the centre.

Drill and tap 3 x 6mm holes in the end plate and 6mm clearance in the aluminium flange.

Re assemble

Sounds good when you read it fast - but it shouldn't be a big job in a workshop. As I recall there used to be numerous engineers on the north side of Huddersfield mainly servicing ICI etc, but alas they may have gone

regards
Bernard

Comment by Frogherder posted on Manfrotto replacement centre column needed at 19/05/2011 - 15:25

Frogherder
Like most Brits of my age I'd never heard another language until secondary school. - French & Latin were shocks I wasn't expecting. There was Latin in church, but that wasn't conversational just mantra

We used to have oranges at school when I was a kid, I think they were Seville or Satsuma, certainly not Mandarin.

There's a thought - Mandarin Duck a l'Orange (made with Mandarin Oranges)

Bernard

Comment by Frogherder posted on Another pointless thread at 18/05/2011 - 18:18

Frogherder
Ah there's the rub- My finances don't run to Photomatrix so I was trying what I had. Maybe one day.

Bernard

Comment by Frogherder posted on Victoria Arcade in Leeds at 18/05/2011 - 18:09

Frogherder
Some of the local youngsters are learning Japanese (maybe because Toyota have a plant nearby).
I'm just waiting to find out what the local venacular "hey up me duck" sounds like when translated.

My grand-daughter and grandson will probably be subjected to learning Welsh as my daughter in law is Welsh (only just though - omes from bewteen Wrexham and Chester) and her mother is determined that they hear it.

regards
Bernard

Comment by Frogherder posted on Another pointless thread at 18/05/2011 - 17:05

Frogherder
A week or so ago I spent a few hours in Leeds and found one of the jewels.
I took several shots at differing exposures, but couldn't get the roof beams and shops at a reasonable level together.

Today I received a focus rail so I could emulate Snappyhappy's delightful flower shot in his Image Stacking thread but it's windy and raining so I thought that, out of curiosity, I would load a few of the pics I'd taken into CombineZM and see what happens

I was surprised at the result and can't make up my mind whether I like it or not. I certainly find it intriging. What do you think?

[IMG]http://i1236.photobucket.com/albums/ff444/Frogherder/VictoriaArcade-2.jpg[/IMG]

regards
Bernard

Comment by Frogherder posted on Victoria Arcade in Leeds at 18/05/2011 - 16:57

Frogherder
I have a smattering of 3 (German, French, Italian + Latin if that counts these days) and rarely get a chance to practice and when I do its shameful how I manage to mix up the words from one to another when I get stuck

regards
Bernard

Comment by Frogherder posted on Another pointless thread at 18/05/2011 - 16:03

Frogherder
Quote:
The Optios are of medium speed
Are there any tables of speeds?

By comparison my K10D is effectively instant as far as I can tell
My wifes Olympus can take noticible seconds (Click the shutter as a second hand sweeps past 12 and it will record between 3-5 seconds)

I thought of digging out my old frequency counter which has time lapse in 1/1000 secs, but then I wouldn't be able to trigger it from the handbag camera -ah well

regards
Bernard

Comment by Frogherder posted on Which Optio should I get for in my pocket at 18/05/2011 - 14:51

Frogherder
Anti-shake built into camera so even M42 lenses (with adapter) will work.

Bernard

Comment by Frogherder posted on What would you tell someone new to Pentax DSLRs? at 18/05/2011 - 14:26

Frogherder
I hope this isn't hijacking this thread.
My wife has a little Olympus in her handbag and we are looking to replace it so interested in the comments above.

The main reason for the change is the "response time" between pressing the shutter and the click of the picture being taken. Many pictures have been ruined when things have moved away.

Query - Do all small compacts suffer this "problem"?
Is it noticible in the Optio range?

regards
Bernard

Comment by Frogherder posted on Which Optio should I get for in my pocket at 18/05/2011 - 13:17

Frogherder
Sorry if I got the grammar wrong, my first thought was "bitte" but my studies never got as far as future tense, so I have to admit - I cheated - I used google to translate what I thought would be a bit of levity and copied it verbatim.

As a native of the UK I freely admit I am, like most of my countrymen, "not the best" at foreign languages.

Happily I've found that all the "foreigners" I meet have a very good command of English and are polite enough not to be-little me when I try to use theirs, albeit often limited to asking the way, getting food, transport etc. Passing the time of day in another language must be great.

regards
Bernard

Comment by Frogherder posted on Another pointless thread at 18/05/2011 - 13:10

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo