And why should that be a problem on the pentaxforum instead of PBase?
They can both be at fault but how do you explain that the forum does work perfectly with other sites?

Since it's only PBase it's more logical to assume that fault is with them.

That's a hard one right now, Nvidia or ATI...

Sli/crossfire is not advisable, it can run great but for the same money you can get a single card with the same performance.

What chipset do you have on your motherboard, what money are you prepare to give out and what OS do you run?

Also how many monitors do you want to use, ATI support 6 now

Just bought cactus as well with a stand and umbrella.
Fist the cactus didn't sync good for the first 100 shots for some mysterious reason, flash fired of the photo or if I had shutterspeed longer then 1/10 no all is fine and can get 1/180.

Only the shop has giving me the wrong stand and swivel-head for the flash mount.

Oh wow daring.

I wish pentax would define what they find save for voltage trigger, I've no idea if there is something in the manual about it.

Thank you, I still need to go through the photos but it's a taunting task.

Yeah the K10D isn't so bad, certainly not if you reduce the size of the photo to this, I normally never shoot over ISO400 thought, only when really needed.

I'm very glad I had the DA*50-135, it was good enough for this, although 70-200 might have been better. The DA*60-250 would be less at night because of the f/4 but during the day that would be a great lens.

TTL doesn't work with the newer DSLR cameras for Pentax it's P-TTL and it works differently.
So with the older flashes you need to use Auto or Manual mode of the flash.
What mode you use on the camera is up to you.
X mode simply set the shutter to 1/180 to insure good synchronization.
You can also use M mode on the camera that gives you a bit more freedom.

I don't know if you can use other modes on your camera... but don't think so.

Pete that's about memory cards but the program does the trick as well for HDD.
here it is link

btw this software only works for FAT12, FAT16, FAT32, NTFS, so if you've a MAC for example you need another program.

No experience on this side either.

Not only Nathan I believe, I'm sure they will write something when they see this.

Nothing special.
Konrads say that Steve must buy one for him so that Steve can play at his place with it.
I wrote that I wanted to say his Dutch is very bad but that I just see it's South-Africans.

I've seen you can meter that with a volt meter, below 12volt was safe I believe.

Just came across this link
Sunpak GX17 = 288V so that's a big no
Miranda 500-CD = not on the list but there is a 630 CD and that's 8.14-8.30V, if they are the same series then it looks safe for pentax, don't take my word for it though.

I've heard of one trick and that's the place your finger on the contacts, if it hurts then it's no good for your camera.
Although it might be true I wouldn't trust it.

Konrads, ik wou eerst zeggen dat je Nederlands wel heel slecht was, maar het is zuid Afrikaans

I never had the privilege to play with one, but they are very good the FA limiteds.

btw there is no limited edition, it's just limited, meaning there production rate is low because of the high build quality, not that there are 10,000 or so made.