What microphone for video?

bretti_kivi
Posted 24/05/2011 - 20:59 Link
shockmount unless you're always going to use the cam tripod or rig-mounted.

Personally, I have a H2 and it kicks some very serious ass when dealing with recordings - and combined with some simple, cheap audio technica lavs and boundary mics, I can get pretty much anything I need / want. We hit a problem with the H2 being out of sync with the 7D - but then, that's why you have a slate - so there's an audio and visual cue for the beginning and end of shot. FCP can mess things around, though...

Bret
my pics: link
my kit: K3, K5, K-01, DA 18-55, D-FA50 macro, Siggy 30/1.4, 100-300/f4, 70-200/2.8, Samsung 12-24/f4, Tamron 17-50, and lots of other bits.
Anvh
Posted 24/05/2011 - 21:03 Link
Bret slow down, audio noob here XD
What is a slate and FCB?
And H2, from what brand is that???
Is it easy to sync the sound, i know from badly out of sync movies that it can be very annoying if it isn't right...
Stefan
Comment Image

K10D, K5
DA* 16-50, DA* 50-135, D-FA 100 Macro, DA 40 Ltd, DA 18-55
AF-540FGZ
Edited by Anvh: 24/05/2011 - 21:11
Anvh
Posted 24/05/2011 - 21:11 Link
Stefan
Comment Image

K10D, K5
DA* 16-50, DA* 50-135, D-FA 100 Macro, DA 40 Ltd, DA 18-55
AF-540FGZ
bretti_kivi
Posted 24/05/2011 - 21:23 Link
slate - the clapboard at the start and end of the shot
FCP - FinalCutPro

Zoom H2, that's the baby. Works really nicely for me. I have a superclamp and lite-tite to fix it to my tripod whenever I want - and I keep the audio on the camera so I can sync manually if necessary. I have a Rode deadkitten for wind use and it works very nicely. The H2 is very, very clean when recording and I used it the other morning over an expensive, large mic as it was quicker and just as good quality, especially when it's a three-minute video narration.

Bret
my pics: link
my kit: K3, K5, K-01, DA 18-55, D-FA50 macro, Siggy 30/1.4, 100-300/f4, 70-200/2.8, Samsung 12-24/f4, Tamron 17-50, and lots of other bits.
Edited by bretti_kivi: 24/05/2011 - 21:24
Anvh
Posted 24/05/2011 - 22:55 Link
Thanks, now that you said a slate is i precisely know, i just didn't knew that English name I only know it as a clapperboard.
Final cut rings a bell ^^

Will have a serious look at the H2, will read the review and might have some questions later
Stefan
Comment Image

K10D, K5
DA* 16-50, DA* 50-135, D-FA 100 Macro, DA 40 Ltd, DA 18-55
AF-540FGZ
Don
Posted 24/05/2011 - 23:23 Link
I'm too cheap to buy a slate.
I have an islate ap for my phone, but usually I just walk into my frame, countdown using fingers.. 3-2-1 then loudly clap my hands..... sinking the audio in post for 2 or 3 cameras has never been a problem, you simply line up the audio spikes in the audio waveforms in post... as long as each video clip is locked to it's own audio, they'll synch up perfectly. same deal with an external audio recorder, you line up your audio file to the audio file from the video clip....
Fired many shots. Didn't kill anything.
Frogherder
Posted 25/05/2011 - 13:39 Link
Stephan be aware that those patterns were probably produced in a specialist sound chamber and in the real world you may not notice the difference. A bit like radio/tv aerials, they can still pick up ghost reflections from adjacent surfaces.

No one mentioned "noise cancelling microphones" - could be a usefull variation to consider if you go to noisy events. Google will provide any number of links

regards
Bernard
Don
Posted 25/05/2011 - 14:33 Link
every type of mic has it's pros and cons.
noise cancelling mics are probably best avoided for most novices.
here is why..
expense, and quality...
for some types of eng or environments they are fine.
But with either electronic trickery or out of phase dual mics the noise canclling cons are lower sensitivity, as the sound has to cancell noise from one mic with another mic, of electronically filter sound out from the source audio.. anywhere the ambient noise overlaps the vocals in frequency, the vocals get sliced up as well as the noise, resulting in reverb type distortion...

radio mics are prone to interference and get very expensive for decent quality.
shotguns are your best bet if used right for most video work...

wired lavs are great as well...

the zoom recorders are great on thier own or when used with other mics.

the best route to good audio is to always think noise to signal ratio.... the closer your mic is to the subject, the better your noise (ambient noise for eg) to signal (voice for eg) ratio.

an experienced boom mic operator with a shotgun mic on a pole is always best... failing that, set your camera to wide angle, and move in close with a camera mounted rode, you can't go very wrong.
always listen with headphones for clipping or background distractions. if you get any clipping, lower your mic levels and shoot again..

properly placed lavs (even wireless) are great in noisy environments as they pick up the voices and less ambient noise.. which is why many videographers "Mic the groom" he does the least talking, and stands facing the Bride and officiant, and so is perfectly placed for lave mic'ing them as a group.

Audacity is free and has a very decent "Noise Removal" tool if you have a hum or hiss you need to remove in post, but again, don't bother removing ambient noise that overlaps your vocals .... world of hurt and head aches there...
I think the best solution for a d-slr shooter (with mic jac, k5, k7) is to run a rode mic into a zoom recorder, then plug a y splitter from the zoom headphone jack to the headphones and mic in jack on the slr.... you can hear what is goin in to your camera as you record, and you got clean audio back-up on the zoom recorder...
add an inexpensive (I use Audio Techna) wired lave or two to that kit and you got all bases covered, the Rode for mobility, the lavs run to the zoom for interviews or mic'ing the Groom (put the zoom on his belt) or the zoom on its own for conference type group shots.
Fired many shots. Didn't kill anything.
Edited by Don: 25/05/2011 - 14:41
Algernon
Posted 25/05/2011 - 15:07 Link
It's worth trying one of these link with and extension cable. I've used them with DAT and Mini-Disc recorders and they are exceptional considering the price (20Hz to 16KHz +/- 1dB). Better than similar Sony stuff costing 10x more and with a more powerful output. Alternatively buy the Panasonic electret condenser module and make your own Years ago people used to sneak DAT recorders into concerts and record them using Panasonic electret condenser modules inside pens in their top pockets http://www.solorb.com/dat-heads/

Search for "electret" in this thread
Half Man... Half Pentax ... Half Cucumber

Pentax K-1 + K-5 and some other stuff

Algi
Edited by Algernon: 25/05/2011 - 15:26
Anvh
Posted 25/05/2011 - 20:23 Link
Thanks Don, a lot of info there.

I was thinking i could use the K10D maybe as a slate

The wiring solution is a great idea, i wonder if the zoom recorder can record de sound of the external mic and his own mic at the same time but on 2 different tracks of course, that would be super but i don't think it can be done.

Thanks Algi but i want something with more aim

Bernard, like Don say i doubt noise cancelling microphones are any good because they must be very accurate and they will then become very expensive.
I rather remove the noise in post-processing if it really bothers me.
I don't like the sound of the camera though in the video so will see if i can get a good mount for that. External is better i know but i'm running an one man show here and i only have two hands strangely enough...
Stefan
Comment Image

K10D, K5
DA* 16-50, DA* 50-135, D-FA 100 Macro, DA 40 Ltd, DA 18-55
AF-540FGZ
Don
Posted 25/05/2011 - 20:51 Link
I believe the zoom h4 and possibly h2 can record both from external and internal mics at the same time.
Fired many shots. Didn't kill anything.
Anvh
Posted 25/05/2011 - 21:16 Link
Thanks Don, only need to find out if it also create 2 seperate tracks.
Stefan
Comment Image

K10D, K5
DA* 16-50, DA* 50-135, D-FA 100 Macro, DA 40 Ltd, DA 18-55
AF-540FGZ
rparmar
Posted 26/05/2011 - 03:34 Link
Only now saw this thread. So, a few things from a trained audio engineer...

K6 + M66 is a good low-cost solution for a mono microphone that you want to run without phantom power, since it uses its own internal battery. Sound quality is "good" and you will pay a lot more to get "excellent". I own this combo myself.

You will want some sort of a boom for it I imagine, depending on what you will be vidding. The easiest way to improve your sound is to simply get your microphone closer to the sound source. That means getting it off the camera. (Oh wait, Don said that already.)

It's easy to sync video with audio from a second source. Simply clap your hands on camera. In your video editor, put the audio track in line with the video (which has its own audio as well). Zoom in and get the clap peak exactly aligned. Then mute or delete the audio track from the video, leaving only the separate audio. Voila!

The Zoom H2 and Edirol recorders are poor: cheap build quality, bad soldering, high noise floor. Buy something better, like the Sony M-10 or the Olympus LS-5. I have written extensively about them on my blog.
Listen to my albums free on BandCamp. Or visit my main website for links to photography, etc.
Edited by rparmar: 26/05/2011 - 03:37
Don
Posted 26/05/2011 - 03:39 Link
rparmar wrote:
Only now saw this thread. A few things from a trained audio engineer.

K6 + M66 is a good low-cost solution for a mono microphone that you want to run without phantom power, since it uses its own internal battery. Sound quality is "good" and you will pay a lot more to get "excellent". I own this combo myself.

You will want some sort of a boom for it I imagine, depending on what you will be vidding. The easiest way to improve your sound is to simply get your microphone closer to the sound source. That means getting it off the camera. (Oh wait, Don said that already.)

It's easy to sync video with audio from a second source. Simply clap your hands on camera. In your video editor, put the audio track in line with the video (which has its own audio as well). Zoom in and get the clap peak exactly aligned. Then mute or delete the audio track from the video, leaving only the separate audio. Voila!

The Zoom recorders are poor: cheap build quality, bad soldering, high noise floor. Buy something better, like the Sony M-10 or the Olympus LS-5. I have written extensively about them on my blog.
will certianly read, but I have only heard rave reviews about the Zooms, a lot of video editors swear by them.
Fired many shots. Didn't kill anything.
Smeggypants
Posted 26/05/2011 - 06:52 Link
rparmar wrote:
Only now saw this thread. So, a few things from a trained audio engineer...

K6 + M66 is a good low-cost solution for a mono microphone that you want to run without phantom power, since it uses its own internal battery. Sound quality is "good" and you will pay a lot more to get "excellent". I own this combo myself.

You will want some sort of a boom for it I imagine, depending on what you will be vidding. The easiest way to improve your sound is to simply get your microphone closer to the sound source. That means getting it off the camera. (Oh wait, Don said that already.)

It's easy to sync video with audio from a second source. Simply clap your hands on camera. In your video editor, put the audio track in line with the video (which has its own audio as well). Zoom in and get the clap peak exactly aligned. Then mute or delete the audio track from the video, leaving only the separate audio. Voila!

The Zoom H2 and Edirol recorders are poor: cheap build quality, bad soldering, high noise floor. Buy something better, like the Sony M-10 or the Olympus LS-5. I have written extensively about them on my blog.
I'm an Audio engineer as well and concur with rparmar's post above. Both Zoom and Edirol are budget low quality stuff in the Zone of Behringer.

Edirol, which sounds like a toilet cleaner, is Roland's budget line.

And yes it's easy to sync audio these days in a DAW program by aligning waveform peaks.
[i]Bodies: 1x K-5IIs, 2x K-5, Sony TX-5, Nokia 808
Lenses: Pentax DA 10-17mm ED(IF) Fish Eye, Pentax DA 14mm f/2.8, Sigma 17-70mm f/2.8, Pentax-A 28mm f/2.8, Sigma 30mm F1.4 EX DC, Pentax-A 50mm f/1.2, Pentax-A 50mm f/1.4, Pentax-FA 50mm f/1.4, Pentax-A 50mm f/1.7, Pentax DA* 50-135mm f/2.8, Sigma 135-400mm APO DG, and more ..
Flash: AF-540FGZ, Vivitar 283

Add Comment

To leave a comment - Log in to Pentax User or create a new account.



Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo