tyronet2000

Joined: 16th April 2011

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

tyronet2000
It fits the goosegog on the gooses bridle which conects the runching wire to the veeblefetzer.

Comment by tyronet2000 posted on Spare Part Identity at 21/02/2016 - 15:34

tyronet2000
Thanks All for the feedback. I don't think I'd trust that card again and will look for other marques as suggested

Comment by tyronet2000 posted on K-3 Card not formatted error at 20/02/2016 - 20:04

tyronet2000
Thanks Bill. I have ver 1.21 it was the first thing I did after getting the camera. I won't be using that card again, as you say probably have been lucky. At least with the K-3 there are two cards so had a "spare" Will look for another couple of cards. This is the first problem I've had with cards, used Duracel and other Lexar but it is a bit off putting when something like that happens. Still as long as it's the card and not the camera

Comment by tyronet2000 posted on K-3 Card not formatted error at 20/02/2016 - 18:42

tyronet2000
During a shoot today the error message came up on the screen of the K-3 Card Not Formatted 1. I assume the 1 was a reference to the card in use. Switched the camera off then on again and it has worked as normal, all the previous images were on the card, a Lexar 16GB 400x, and functioned ok for the rest of the shoot, taking normal and long exposures. Any suggestions as to what has caused this, anyone else experienced this. The sdhc is a fairly new one and was formatted in camera the previous day.
Have only recently acquired this camera, it was bought off a forum member and had very low shutter count of just under 1800.

Thanks in advance for any help or advice

Comment by tyronet2000 posted on K-3 Card not formatted error at 20/02/2016 - 17:35

tyronet2000
Used a Canon ix6550 and had some success with this using the Canon inks. I have been using Stinky ink lately and started to get a green tone on B & W prints but that may have been caused by problems with my eyes etc. H twiddled on with the setting and have printed a couple of mono images which I'm happy with and am waiting for a third party to look at them and comment. I was considering the Canon Pro 100s which seems to get good reviews but am also looking to change my monitor too.

Comment by tyronet2000 posted on Which printer? at 17/02/2016 - 17:00

tyronet2000
Sold the K-7 and the K-5. Now have the K-5IIs and the K-3. I thought the images on the K-3 looked "better" somehow I can't explain but then when I go through what I think are my "best" images they come out even.

Comment by tyronet2000 posted on K5IIs versus K5 at 15/02/2016 - 22:30

tyronet2000
vic cross wrote:
Cheers Algi. If My memory serves me right they were Sinclair. One of his first products.
CHEERS Vic.
Liz got me one for Christmas 1973 IIRC, Strap was too small so took it back. Think Kojack set the trend for them must have got a complimentary

Comment by tyronet2000 posted on Another pointless thread at 15/02/2016 - 15:02

tyronet2000
CiderDrinker wrote:
So is a mankini formal enough to shot a wedding?
I thought you were talking about cigars but of course thats a Manakin

Comment by tyronet2000 posted on Another pointless thread at 15/02/2016 - 15:00

tyronet2000
Algernon wrote:
Ha! Ha!

Why not just use DISNEYx8

If they ask for letters and numbers..... I use ......
TwoAndAHalfMen

--
Capitals I use ParisRomeLondon

Comment by tyronet2000 posted on Another pointless thread at 15/02/2016 - 14:58

tyronet2000
I've solved the problem when asked for an 8 characters password
I use:
MinnieMickeyPlutoDonaldDaisyHueyLouieDewey

Comment by tyronet2000 posted on Another pointless thread at 15/02/2016 - 11:42

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo