All Forum Comments
Comment by terje-l posted on OT. Disk cloning - any Windows issues? at 14/12/2008 - 14:36
Mac, I hope you crop your photos when printing at those different sizes. Sorry if I'm saying something you're blatantly aware of but the uncropped pics from your pentax is in the ratio of 3 wide by 2 tall. Out of the sizes you mentioned only 6x4 will keep that ratio. ie 3x2 times 2.
I find it strange if printers don't keep the ratio locked.
Comment by terje-l posted on Relative Enlargement Sizes at 11/12/2008 - 21:55
But then again, reading manuals is obviously a pastime for the selected few.
Comment by terje-l posted on *M lenses shoot wide open on my K100D at 09/12/2008 - 11:58
If you really are a newbie, I would suggest to start with the excellent 18-55 mm Mk II kit lens, and see where your preferences take you.
Comment by terje-l posted on No K20D's available to try out at 09/12/2008 - 11:48
[IMG]http://i233.photobucket.com/albums/ee91/terje-l/fontene.jpg[/IMG]
When you see the crest, the resemblance is quite clear:
[IMG]http://i233.photobucket.com/albums/ee91/terje-l/byvpen_edited-1.jpg[/IMG]
The crest is just a graphic file downloaded from Internet.
Comment by terje-l posted on Creative Town Council at 09/12/2008 - 11:41
No aperture indication in viewfinder, but aperture set on lens. Operating the Depth of field lever (optical) switched on the metering. Also you could hear the lens stepping down when the lever was operated, and also observe the effect in the viewfinder. (The Preview Method must be set to Optical in the Custom Settings menu).
It is a little easier on the K200D, which has the green button for exposure check.
Comment by terje-l posted on *M lenses shoot wide open on my K100D at 09/12/2008 - 08:32
BTW, when the camera is on the tripod, SR should be switched off, according to some experts on this forum. Also, when using a tripod, you should use a remote release, or use the built-in self timer, to avoid any movements.
Another test trick is to a)let the autofocus set the range, then b)switch off AF and shoot a series with focus bracketing (i.e. make small changes on the focus ring on either side of the AF point).
AF should work OK, but as I said, it needs a contrasty part of the subject to lock, especially in low light conditions.
You could post a couple of samples so the experts could see if we are talking about out-of-focus or camera shake.
Comment by terje-l posted on K100d not sharp! at 08/12/2008 - 11:39
- Obviously, I believe you have the Shake Reduction switched on.
- Autofocus needs a contrasty area to focus, especially in low light.
- Have you tried manual focus?
- Do a focus test using one of the many focus test charts available
- Do you see the green hexagon confirming in-focus before pressing the shutter?
- Do you wait for the SR symbol to appear before shooting?
The 18-55 mm kit lens is one of the best kit lenses around and should give good results unless faulty.
In the beginning I found that indoor pictures in natural light tended to be out-of-focus. With flash, the pictures were normally tack sharp.
I am no expert in these matters, but this is my humble contribution anyway...
Comment by terje-l posted on K100d not sharp! at 08/12/2008 - 10:13
Comment by terje-l posted on k200d battery grip at 07/12/2008 - 22:21
To continue the calculation above, at f/22 the max. distance would be 14/22 = 0.64 metres. This is the sort of aperture you are looking at to provide enough DOF.
I would certainly not use a ring flash for portraits.
Comment by terje-l posted on Sigma EM140 DG Macro Flash at 07/12/2008 - 22:08

