sportyman531

Joined: 6th December 2010

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

sportyman531
Thanks for all the suggestions everyone, food for thought!

Comment by sportyman531 posted on Macro lens for copying at 01/01/2025 - 22:28

sportyman531
I have been scanning transparencies and negatives, both 35mm and 645 but the process is very slow and I have thousands to go at!
Pentax have a 50mm f2.8 macro and a 100mm f2.8 macro, which would be best for my purpose?
What height on a copy stand would be needed?
In film days a 50mm lens could be used reversed with extension tubes, if I remember rightly, but I assume that this is not practical with digital?
What size of lightbox would be OK, does an A4 size have any advantage over an A3? Any other sizes?
Thanks in Advance.

Comment by sportyman531 posted on Macro lens for copying at 22/12/2024 - 13:34

sportyman531
The results are in and leaving SR switched on is the decision.

Comment by sportyman531 posted on Monopod at 19/10/2021 - 19:05

sportyman531
Thanks for the advice everyone, I will go out on a "test run".

Comment by sportyman531 posted on Monopod at 14/10/2021 - 23:45

sportyman531
When using a tripod the advice is to switch off shake reduction but what about when using a monopod, SR on or off?

Comment by sportyman531 posted on Monopod at 13/10/2021 - 23:04

sportyman531
Thanks for the replies everyone, I went for the Dell U2719D on the specification and because the other monitor on my shortlist was constantly on pre-order but never in stock. It's factory calibrated so should be OK for a year but, as mentioned above, the screen is very bright. It is set to 75% from the factory, I've dialled it down to 50% now and will see how it goes.

Comment by sportyman531 posted on Monitors and sRGB at 17/03/2021 - 09:11

sportyman531
I have been reading monitor reviews and those which are aimed at photographers are often factory calibrated whilst those which are not don't mention this. I have been looking at Dell U type (factory calibrated) models and Dell P type (which in reviews say they closely match sRGB colour space). At my Photographic Society there is a device available to members for calibrating monitors so do I need a factory calibrated model. Ultrasharp monitors seem to be popular with photographers so are there other advantages with them?

Comment by sportyman531 posted on Monitors and sRGB at 16/02/2021 - 10:06

sportyman531
Update:

I wasn't able to identify what the specific problem was but I contacted SRS who asked me to send some sample pics. As the camera body was still under warranty, just, they then advised me to return it for service/repair, which I did. It came back from Johnson's Photopia with a note that, "Checked to specification, unable to re-create fault - Updated Firmware". I have used it a few times since and so far everything has been OK.

Comment by sportyman531 posted on Focusing problem at 02/10/2018 - 22:20

sportyman531
I have a K3 which can shoot at 8.3fps but, having read some reviews, the 50-135 is described as having slow autofocus. It seems pointless having a camera with a fast frame rate but a lens with autofocus which can't keep up. does anyone have experience of this?

Comment by sportyman531 posted on DA 55 - 300 v DA* 50-135 at 01/05/2018 - 19:49

sportyman531
gtis wrote:
Hi
If you really want a da* lens you should get a
Da* 60-250mm if you have a kidney to spare
Too much of a beast in size and weight!

Comment by sportyman531 posted on DA 55 - 300 v DA* 50-135 at 01/05/2018 - 19:38

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo