richandfleur

Joined: 3rd December 2012

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

richandfleur
Was thinking about this as I waited at the bus stop this morning.

Focus on the software, the packaging can be stored away and forgotten about.

Things I'd say to myself if I could go back to when I just started lightroom...

Don't worry too much about the presents.
I remember googling 'free presets' when I just started out and obtaining a heap of them.
In practise an awful lot of the adjustments in presets are tailored to the image they were created on. So most often using a preset is not going to look very good when you use it, as you're not starting with the same image, both in terms of white balance and exposure etc

So, by all means use some presets as starting points, but don't expect them to just magically work at all times.

There's a pretty natural flow to the work as you go down the right hand side.
I tend to start by applying the auto exposure and colour button and see if I like what it does to my image. This typically blows my image to being over exposed, so very often I don't end up using it.

That first top section on the right hand side covers the core adjustments, of cropping and levelling an image, adjusting the white balance, exposure, contract, vibrance etc. Vibrance if you haven't come across it before increases the saturation of non saturated areas, and it's supposed to leave skin tones around. I'd suggest using that first over the plain saturation slider, and see what you think.

Every edit is non destructive, so play lots. You can create a 'virtual copy' of a photo and try different approaches on it to see which one you like best.

After that the key points for me are the lens correction bit, where I can remove purple fringing.

Sharpening (don't over do it)

Post crop vignette.
(Post crop means it will start with whatever image you have cropped too, and then vignette in from there, to ensure an even vignette, even if you've cropped previously.)

There are levels curves, split toning etc. but they're all a bit more involved to get working.

The clone brush works really well with a smooth feather. Try the heal option first, as the clone is more traditional but the heal automatically adjusts the brightness etc.

One thing that I really liked though was the ability to drop the saturation of a specific colour range. I've found my Pentax to over saturate some colours at times and the ability to selectively drop a colour range down is useful.

Anyhow, the software is quite progressive, in that you can do more with it as you feel comfortable, find a need etc. I found myself looking at other photos more and asking how they achieved that look etc, and then playing to see if I could replicate it etc.

Comment by richandfleur posted on Lightroom - is it just me? at 18/02/2016 - 22:28

richandfleur
paulcliff wrote:
Looks like a beautiful camera, but sadly out of my price range, so the real question is: will we see the k-3 & k-3ii drop in price?
I don't think so. That will only happen when the APS-C version of the K-01 comes out.

Comment by richandfleur posted on Finally! Pentax K-1 is official... Pre-order and Open Day information at 18/02/2016 - 07:19

richandfleur
Also I really like those operational light LEDs too. They look to be very practical.

Comment by richandfleur posted on Finally! Pentax K-1 is official... Pre-order and Open Day information at 18/02/2016 - 02:43

richandfleur
Agreed Smeggy, it looks like a solid unit. I wish them all the best with it.

Comment by richandfleur posted on Finally! Pentax K-1 is official... Pre-order and Open Day information at 18/02/2016 - 02:04

richandfleur

Comment by richandfleur posted on Lightroom - is it just me? at 17/02/2016 - 22:25

richandfleur
In a cost cutting, but under the guise of eco aims, many products do not feature a printed manual these days.

Essentially they are selling the software, that's the product, and it is what you have received.

The documentation for it is online, and honestly is superior to a printed manual. Both in terms of there being a video channel to actually show you step by step, and in terms of it staying current as you apply updates over time.



Free ebooks etc are out there

Comment by richandfleur posted on Lightroom - is it just me? at 17/02/2016 - 22:24

richandfleur
Depends on what you want to do with it, and why you chose it.

I use it as my main software for photo developing, but agree it took a while to come to grips with.

Sing out if you want a hand with anything specific, there are many here who can help.

Comment by richandfleur posted on Lightroom - is it just me? at 16/02/2016 - 23:47

richandfleur
Make your changes to one.
Select the other photos you want to sync those changes to.
Press Sync.
Pick the bits you want to sync, using all or none buttons to potentially speed this up.
Press go or apply or whatever that button is.

It's faster than it took me to write all that above. Super fast, super easy.

Comment by richandfleur posted on LR- copy preset changes from one photo to multiple or apply changes to multiple images simultaneously at 16/02/2016 - 22:15

richandfleur
Wifi updates will surely become just the way you do it. Just like other devices, the new file will flag that it's available, you download over wifi and once the file is complete you start the upgrade process.

Some amount of built in memory should be standard these days also. It's all so cheap now. That could be dedicated to storing the upgrade file.

Obviously you'd have a work around via the SD card also should the downloaded via wifi package be corrupted somehow, or the upgrade process interrupted.

Comment by richandfleur posted on New K-1 Pics and specs at 16/02/2016 - 02:58

richandfleur
D0n wrote:
also don't be surprised if your new camera asks if you want to register or update your firmware,
I would fully expect lots of firmware updates to correct software bugs as they are discovered by early adopters over the coming months.

It seems to be the way now to invite end users to participate in the final stages of software commissioning. Unfortunately they pay top dollar for this privilege, and then their findings are addressed and rectified by firmware update, at which time those then coming on board get the body at a reduced price.

I've said this before elsewhere, but Pentax haven't refreshed any of their product lines recently via firmware. Fuji's latest effort in this regard brought so many new changes (via free firmware update of a 2 year old camera) that they opted to completely re write the manual instead of add it all as amendment at the end of the old one. Pentax should really step up in this area of after sales support and commitment to the end user.

Of late Pentax have overpriced their new offerings, which has hurt their reviews, and then readjusted to a more sensible pricing point some months down the line. The Pentax K-S1 was a classic example of this:
Comment Image

Comment by richandfleur posted on New K-1 Pics and specs at 16/02/2016 - 01:52

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo