richandfleur

Joined: 3rd December 2012

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

richandfleur
They're practically the same camera so not a lot between them at all.

The K-30 was on runout pricing recently, not sure if it still is, which made it an exceptional buy.

That said I believe I'm having an issue with my K-30 Aperture Motor, which is leading to random over and under exposed images fairly often now. So, with mixed emotions, I'd have to recommend that you consider a warranty on anything new, ideally of the 2 year variety...

Comment by richandfleur posted on Another dslr body at 21/01/2014 - 20:34

richandfleur
Well done and your write up is inspiring also!

Comment by richandfleur posted on Brandy In The Afternoon at 21/01/2014 - 18:59

richandfleur
dcweather wrote:
Crikey!He must have a very short and twisty neck compared to mine! Can't get near the viewfinder!
Lol I was thinking that as well, with regards to squishing the camera into my shoulder. Possibly easier for a lefty!

Good to raise the importance though, good technique shouldn't be overlooked. Actually having a laugh at how the 'spec's crawlers' might be missing the point about iso and shake reduction performance with fundamentally dodgy basic techniques.

Comment by richandfleur posted on a quick technique for grip improvement. at 21/01/2014 - 01:19

richandfleur
dcweather wrote:
the overriding factor with noise is the correctness of the original exposure
I'm glad you said that. Pentax (well JPEG output at least) has a tendency to meter quite dark in order to protect the highlights. Pentax seem to be able to get away with this approach because there is a lot of detail captured in the shadows anyway. Correctly exposing your image for your intended final look though can have a huge impact on minimise the noise you capture also.

Whilst on that note... Pentax seem to generate extremely good JPEG outputs, which is pretty cool.

Comment by richandfleur posted on [Considering upgrade] Where else is K-3 strategically better than K-5IIs? at 21/01/2014 - 01:16

richandfleur
Smeggypants wrote:

It's done by trial and error and observing the parallax error between a nearfield object ( something like a vertical knitting needle for example ) and something at infinity ( far away )

Adjust the rotation point until there's no change in parallax when rotating.

Some info here

http://wiki.panotools.org/Entrance_Pupil_Database
Thanks

Comment by richandfleur posted on Pentax 50mm 1:2 SMC Pentax-M. Any good for portraits? at 21/01/2014 - 00:00

richandfleur
Smeggypants wrote:
Unless you rotate(pan )the lens around the "entrance pupil" you WILL get a change in perspective, which can often be pronounced.

This is exactly why pano heads are designed the way they are, so the camera lens assembly can be rotated around the entrance pupil to avoid parallax errors when stitching panos together.
Agree on this but (if this was in reply to me) I was specifically talking about the portraits in question by the original poster in this thread.

Following on from this though, how does one determine the 'entrance pupil' location on the kit lens? Is just inside the front glass a good enough estimation for instance? Keen to improve my panoramas by adopting this approach, so appreciate the heads up info on this Thanks.

Comment by richandfleur posted on Pentax 50mm 1:2 SMC Pentax-M. Any good for portraits? at 20/01/2014 - 19:31

richandfleur
There is clearly two different aspects here, with terminology blurring between the two.

One is the physical viewing lines based on distance/position to the object. This dictates what is physically visible for a fixed given location, ie can't magically see around corners etc.

The other is the distortion of the lens (used to both positive and negative effect) to represent that same view in different ways dependant on the lens selected. Barrel/wide angle deformation and telephoto compression etc. How we use this side of things is up to us as photographers and is all part of the ingredients/magic

lol, just to wind everyone up though I don't like the tone or lack of real argument of this guy at all.

I feel that whilst yes there is a crop factor involved, you're still very likely to get the specific lens deformation of a 50mm lens regardless of what sensor format you're using. But the two are very intertwined, in that if you want to use say a 135mm on a crop sensor then you'll then have to stand much further back which will change the perspective. So, back to where we started, in that the 50mm does work well on the crop sensor

Comment by richandfleur posted on Pentax 50mm 1:2 SMC Pentax-M. Any good for portraits? at 20/01/2014 - 19:12

richandfleur
Apologies for reopening a wound. My thoughts were around the FF to APS-C conversions, and having taken some time to consider the concepts John and co have conveyed I can see where you are coming from.

A different and more simple way to convey this could be:

To achieve the 'most flattering' perspective for a portrait requires a lens around the 70-135mm range in FF. To achieve the equivalent 'flattering perspective' in APS-C terms, one would find themselves using a 50mm or so lens, as this would end up placing the photographer in a position back from the subject that achieves the same 'flattering perspective'.

As I said right from the start, it works with a 50mm lens on APS-C, so not suggesting otherwise. Appreciate the feedback and discussion/assistance to understand the concepts.

Comment by richandfleur posted on Pentax 50mm 1:2 SMC Pentax-M. Any good for portraits? at 20/01/2014 - 07:07

richandfleur
SteveEveritt wrote:
apparently the favoured length for portraiture is around the 70-135mm range so, taking into consideratioin your 1.5x crop factor, a 50mm will have the equivalent look of a 75mm lens, very definitely in the range.
I've kinda got an issue with this line of thinking, but at the end of the day, a 50mm lens on a crop sensor APS-C sensor/body does produce fine portrait images.

Different lenses compress the image to different degrees (distance between close and far away objects) more with higher focal lengths. So a 300mm lens compresses everything up and a 10 or 18mm lens will accentuate near items much more, even to the point of barrel distortion.

It's the sweet spot of this that makes it a good portrait lens, with regards to the end result on a persons head. Too small a focal length and they'll look bulbous, with big foreheads etc, and too large/long a focal length and their face will look very flat and fat.

My issue the 50mm is that the crop factor limits the field of view only, so really it doesn't actually come into the equation with regards to the effect that lens is going to give on a persons face. A 50mm optic is still just that even when it's on a crop sensor camera.

The caveat may be that in standing further back to achieve the same field of view you somehow create a different image characteristic. That part I haven't really thought right through. Fully open to comments/corrections on the above. I think it makes an interesting discussion.

Anyhow, regardless, the 50mm's take good portraits on Pentax DSLR cameras.

Comment by richandfleur posted on Pentax 50mm 1:2 SMC Pentax-M. Any good for portraits? at 19/01/2014 - 09:56

richandfleur
richandfleur wrote:
Smeggypants wrote:
What pentax should do is release a Sony NEX sized machine with the K-5 sensor.
So basically an MX-1 styled unit, with interchangeable K mount lenses, but with the K5 series sensor...

Or go one step more to compete with the likes of the Sony A7 series
Actually, and a massive brain wave here, what about:

A 35MP or so FF sensor that, (get this), discards the additional outside information when the system/user identifies that a non FF capable lens is attached. At which point the camera functions as a 20MP or so APS-C sized crop sensor.

The above should allow for FF AND address the predictable complaint of "now I have to get a new range of lenses" criticisms. Best of both worlds right there!


The mirrorless version of this system should sort your issue Jules!

Comment by richandfleur posted on Question for Smeggy, maybe or others... at 16/01/2014 - 05:00

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo