All Forum Comments
Comment by richandfleur posted on Hot Shoe Microphone - Recommendations? at 03/10/2014 - 02:03
Depending on your location, and ability to control the ambient sound, then there may be a few options that could work well for you.
I'll let others comment on the hot shoe mic options they've used. My K-30 doesn't have a mic input, so this is not something I'm likely to do myself. As above, that approach is definitely convenient and will provide some improvements over the in camera mic/s. The biggest improvement for me comes from a windsock ability, as wind can totally wipe out an incamera/non protected mic surprisingly easily.
For me, I'd consider this sort of approach:
Rode iPhone Mic Link
Rode Lavalier microphone link
In general it's better to record audio close to the sauce , so the likes of the Lavalier clip ons could be really good, if you're in a position to mount them discretely on your actors. If not, or if that impedes the quality too much, then that idea's just not going to work
Ironically getting some recording device, or it's feed, closer to the action is probably going to produce a major improvement over in camera mics. Even an iPhone mic will sound better if placed right by the actors somehow, maybe just out of shot. Another option could be wireless mics and a receiver feeding straight into the camera's mic socket. This would remove the need for resyncing of the audio, if that's an issue for you.
Good luck
Comment by richandfleur posted on Hot Shoe Microphone - Recommendations? at 02/10/2014 - 21:41
Comment by richandfleur posted on Camera/Tripod Boom Arm at 02/10/2014 - 21:12
Agreed though, pentax has always punched above its weight feature wise.
Question is how does it rise to the top again? Assuming we want that?
Comment by richandfleur posted on Tried a K-S1 today... at 02/10/2014 - 09:06
Agreed, quite exciting to think the K30/50 replacement could have a 24MP sensor
Are we just being fed upgrades to sustain the business??
Comment by richandfleur posted on Tried a K-S1 today... at 02/10/2014 - 02:32
I'm not for or against the hotshoe mount really, and my main question is still what are you recording? There are a wide variety of mic types and you pick one mostly due to what you want to record. ie subject matter.
Directional mics can assist to block some local noise, but depending on your intended use, you may actually want this.
For sure if you want just a basic step up from the internal mic then a hot shoe mount with a wind sock type covering would be a big improvement in some instances. Wind is the biggest issue in my experience, ruining audio that could be useful for personal use situations.
For anything professional, or where you want better quality yourself, such as a wedding ceremony etc, then off camera is effectively it. Audio recorders are pretty cheap these days, but it all depends on the subject matter, as often you're on the go and don't have the ability to place formal mics at a particular event etc.
Comment by richandfleur posted on Hot Shoe Microphone - Recommendations? at 01/10/2014 - 22:57
I'm in a similar situation, in that I'm looking for options for camera support that's not the traditional tourist neck strap. I don't particularly like where that leaves the camera whilst I'm walking about, bouncing in front of me.
Clipping onto a belt is an option I'm considering.
Comment by richandfleur posted on Camera holder belt clips at 01/10/2014 - 22:35
Has anyone got a recommendation for a Hot Shoe Microphone please?
I am not wanting to spend a fortune but do want it to work!
Thanks
If it's documentary style then you can look to record audio off camera, and that iPhone suggestion is actually a pretty good idea. Lapel mics etc are really good, but a multitude of mic types exist because of the multitude of possible uses for them.
The benefit of the hot shoe mic approach is that you get a place to mount a mic without needing to hold it, but the downside is it's not necessarily a particularly great place to mount a mic anyway, given you'll potentially get lens focussing sounds, button beeps/presses and operator breathing etc.
Depending on your editing software, the in camera audio track is best used to sync with the audio from another source. It's very easy to use another audio sauce and to then turn off the in camera audio track.
Comment by richandfleur posted on Hot Shoe Microphone - Recommendations? at 01/10/2014 - 22:11
K50 is two years old, I fully expect it to be upgraded!
If they bung the new sensor in it I'll no doubt try one, I reckon it would be enough camera for most?
Comment by richandfleur posted on Tried a K-S1 today... at 30/09/2014 - 00:49
Does the plastic lens on the front look the part?
Comment by richandfleur posted on Pentax MX-1 Brassed Off... at 26/09/2014 - 21:09


It's a big area, so just wanted to get a feel for what you'd want to do with the gear. It's a bit like asking "What lens should I get for my new DSLR body?" to which the response should definitely include "What do you want to take photos of?" etc
Mic's have different Polar Patterns which means all those different types do different things, or more specifically they get audio from different areas around the camera at different 'volumes'.
Just like ISO noise issues in images, you have noise in audio recordings as well, so you want to capture the audio that's important to you strongly against the background noise. If there is a good separation then you can do things to remove the noise in post. Much like still image noise reduction.
Audio levels is another thing to consider, so you don't 'clip' your audio, which is the same as fully overexposing, or under exposing an area of your stills image, such that the highlights are blown out to full white/or full black and can never be recovered. Pentax cameras offer warnings of this visually as blinking colours on the rear LCD screen.
Pentax cameras (well my K-30) are very poor in this area in audio though, as they don't show realtime audio levels. You are given 5? settings for the recorded audio level, but are given no visual indication of the need to record audio at a lower or higher level. This is another reason that I'm personally keen to handle audio externally to the camera.
Exciting things to read up on with regards to post are:
Denoiser in Adobe Premiere and Low and High Pass filters.
Denoiser is a smart audio noise reduction effect, which looks for hiss/background noise to reduce, and the filters allow you to block audio above or below a certain frequency. A bandpass, or notch, filter does the same thing in one effect, but I like to handle them separately.
An example would be low rumbling or high end hiss, which you could remove from your audio/dialog track with the use of appropriate filters.
Quick hunt for audio clean up examplelink
he's rough, but beer with it