PondSkater

Joined: 4th June 2009

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

PondSkater
Worth checking if the hire company have reported the number plates as being stolen previously as it is difficult (but not impossible)to get plates nowadays as you need to provide ID, proof of ownership of vehicle etc, it is easier to steal them from the same make and colour as your own vehicle. Unless a hire car employee had some spares made...

Comment by PondSkater posted on Legal integrity of EXIF data at 25/06/2009 - 21:58

PondSkater
Canada geese on a mission! I'm surprised there are no young at this time of year.

Comment by PondSkater posted on Make way please at 25/06/2009 - 21:25

PondSkater
Hi all,
Cut and paste this time

Aminstar, that’s what I want to do which happens with my old manual lenses but not DA lenses, Mattmatic below says this can’t be done without using old lenses which I thought but was hoping there might be a sneaky way!

Beakynet, I didn’t know the flash output was adjustable with manual lenses, I was adjusting aperture so I’ll try that, thanks.

Critical-i, the safe-sync looks useful although at the price I could likely get an old flash gun that has got a safe trigger voltage – is there a safe-sync for PC cables (being lazy; I can search it myself now I know what it’s called)
The IR is too high-tech for my Eddison-era flashes.

Bob and his Pentax, I think Matt answered that pretty well, I think there is more of a delay with the red-eye flash than with the P-TTL but the cats eyes still close quicker!

Mattmatic, Many thanks, your 2 posts confirmed my queries. Also I assumed Wireless was radio rather than light


With my old camera I’d made myself a 20ft long PC cable so I could fire one via PC sync and the other by slave light trigger while keeping the camera further away.

The other thing I have is some flash brackets on my wall and I’ve got some old mobile-phone chargers powering the flashes instead of batteries.

I was hoping to use DA lenses and onboard flash instead of PC sync to fire the above combinations as the cats wander in and out , my camera is normally by my chair and if they do anything interesting I was hoping to switch on, pop up flash and go click.

My flashes are Cullman C28 and Sunpak Auto 140 so very low tech.

As I’m only a hobbyist 2x AF360s at £600+ for the pair is a little pricey for the amount of use I’d get.

Thanks everyone for the advice as I’m trying to do my photography with lots of good advice and little cash outlay – It’s a hobby that can get very pricey very quickly, and my photography is partly to record my other hobbies.

Comment by PondSkater posted on Can I switch off the preflash on K20D P-TTL onboard flash? at 25/06/2009 - 13:55

PondSkater
AAArgh, just spent 45 mins responding and got logged out! lunch over. will respond tonight if can get g/f off computer.

Comment by PondSkater posted on Can I switch off the preflash on K20D P-TTL onboard flash? at 24/06/2009 - 13:53

PondSkater
Hi all,
I'd like to use the onboard flash with a DA Pentax lens so that it fires without the preflash so that I can use my old flash guns with slave units.
I thought setting the exposure mode to manual would do it but that still preflashes, setting off my old flashguns, I've been through most of the modes unsuccessfully (stopped when the cat started batting the whiney flashguns off the sofa!).

I realise I can use manual lenses as I use my Tamron 90 with an old flash on a bracket with onboard flash triggering the slave unit.

Both my old flashes are too high a voltage (THANK YOU to whoever first posted the photo strobe trigger voltages link - I would have plugged 270v flashes in otherwise).
I assume that applies to PC socket as well?

Am I missing anything?

I can't afford new flashes; especially as I only normally want to use them close to the subject.

Sorry if this has been covered before but couldn't find anything on a quick search.

thanks.

Comment by PondSkater posted on Can I switch off the preflash on K20D P-TTL onboard flash? at 23/06/2009 - 13:56

PondSkater
Thanks for the welcomes everyone.

I tend to be a shy introveted type and use photography as an excuse for escaping people (if you're behind the camera you're not in front of it!), hence the vague "somewhere in Devon"

Comment by PondSkater posted on Hello from somewhere in Devon at 06/06/2009 - 19:26

PondSkater
Hi aminstar.

You might like to look at the following links:

http://www.dpchallenge.com/how.php?HOW_ID=38
Half way down the page are details on the trigger (I lose about 10 text characters on my monitor)

http://www.diyphotography.net/universal_sound_and_optical_slave_flash_trigger
This site has circuit diagrams

http://www.doc-diy.net/photo/sound_trigger/
More circuit diagrams.

If you type ‘electronic projects sound photo trigger’ into google you should find loads of sites (try swapping ‘optical’ for ‘sound’)

A guy at work made me a sound trigger about 20yrs ago which used a cassette-deck mic to fire a flashgun with 2 dials to set trigger volume and firing lag, that relied on being in darkness so the camera shutter was open on “B” and the trigger fired an off-camera flashgun.
I had a lot of fun bursting balloons etc but haven’t used it for a long time as with film experimental work takes a lot of time (and film!) -I keep finding notes that I wrote but forget what they referred to. Now I’m digital I must retry it.

I’ve just thought you can probably do something with a light sensor from something like a street light or the flashing orange roadworks lights, they work by coming on when light gets dim and you could use a laser pen as stated in the links to provide a narrow beam with tape on the sensor to cut out ambient light.

Disclaimer: Anything you wire direct into your camera is nothing to do with me!
Good luck

Comment by PondSkater posted on Motion sensor trigger for triggering shutter at 04/06/2009 - 22:39

PondSkater
Hi folks,
Thanks for a great forum. I've been lurking for about a year and thought it was about time I joined.
Moved to Pentax when my Ni*on FE shutter started jamming once or twice per roll of film, I've had it since the early '80s, pre AF, program mode etc, so digital has been a REALLY steep learning curve! (accidentally having WB set to "tungsten" when photographing sunsets etc).
The onboard OIS and weatherproofing swung it along with my Adaptall lenses for which I still had the 42mm adapters from my Zenit days.
Happy snapping.
PondSkater

Comment by PondSkater posted on Hello from somewhere in Devon at 04/06/2009 - 21:56

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo