pentaxian450

Joined: 10th February 2008

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

pentaxian450
petrochemist wrote:
In addition longer than 30 is tele, doesn't help much when the choice s 55-300mm, 600mm or 1000mm.
I use lenses from 10mm to 1000mm just knowing normal is less knowing the language than my knowledge of French!!
There is no problem there. Forget the last digit on your zoom or tele, and divide by three, and you have your enlargement (reduction) ratio right there. Couldn't be simpler.

Beside, some "new generation" photographers never worked with 35 mm cameras, so why confuse them right there.

Comment by pentaxian450 posted on Confused on equivalent focal length at 14/02/2012 - 18:57

pentaxian450
petrochemist wrote:
I find the crop factor quite helpful
Why?

You just have to think in relation to the format you use, not the one you used to use.

I work with medium format and APS-C and never use the "crap factor". I know what lens gives what field of view on each format, and go with that.

On APS-C, I know 30 mm is "normal", so everything longer is tele, and everything shorter is wide. It's that simple.

Your approach is more or less like someone who tries to learn a second language, and doesn't want to associate the foreign words with the idea or object they represent, but to the words they represent in the persons native language. On the long run, it slows down the process so much that it makes it almost unworkable.

Comment by pentaxian450 posted on Confused on equivalent focal length at 14/02/2012 - 15:01

pentaxian450
Does somebody hear about Stefan (Anvh)? What is he up to?

Comment by pentaxian450 posted on Stefan? at 14/02/2012 - 00:09

pentaxian450
I never get bored when I see pictures depicting a different lifestyle. I really enjoy your pictures. Nice work.

Comment by pentaxian450 posted on Pakistan Street Photography - 3 at 14/02/2012 - 00:04

pentaxian450
vrapan wrote:
The focal length stated on lenses is always the actual focal length that you would get on a FF camera.
Take off the full frame camera. The focal length is the distance between the nodal point and the sensor/film plane at infinity. It means that a 135mm lens is always 135 mm, be it on a APS-C, 35mm or medium format camera. Actually, "full frame" is a misnomer. APS-C is full frame, so is 35 mm and medium format.

Forget about full frame and "crap factor". Just remember, on APS-C, 30 mm is more or less a standard lens. Longer than that is telephoto and shorter is wide angle.

If you ever use 24 X 36 format cameras, then 50 mm is standard. Longer is telephoto and shorter is wide angle.

On medium format, 75 mm is normal...

Comment by pentaxian450 posted on Confused on equivalent focal length at 13/02/2012 - 18:39

pentaxian450
Mike-P wrote:
I always think other countries have much better looking birds than us.
Strange, but when I look at pictures of birds you have in England, I think the same

Comment by pentaxian450 posted on Birds from Quebec, Canada. at 13/02/2012 - 13:29

pentaxian450
You can't make an equivalent. With constant lights, like halogen, you can alter the shutter speed to change the exposure. With a flash, the shutter speed doesn 't do much to the exposure of the main subject, unless there is some other form of lighting also involved, which is kind of unlikey in a studio set-up.

On the other hand, if I was your friend, I'd look at full spectrum fluorescent bulbs for studio work. The halogen type lights generate so much heat that you have to be really careful when getting them close to your subject(s). Burns can be a very serious problem. The halogen bulbs are also very fragile while hot, which is a pain when handling the lights.

On the other hand, you can easily use umbrellas and softboxes with the fluorescent lights. Softboxes are a definite fire hazard with the halogens, and the umbrellas will "yellow" in a very short time due to the heat.

Comment by pentaxian450 posted on Lumens vs GN at 06/02/2012 - 02:32

pentaxian450
CCD cameras almost always seem "cleaner" than CMOS cameras at low ISO. The main reason manufacturer turned to CMOS sensor is cost, not image quality. Also, high ISO seems better controlled with CMOS sensor. But, at low ISO, a CCD sensor is likely a better solution.

Comment by pentaxian450 posted on K20D Which Lens Please at 01/02/2012 - 01:34

pentaxian450
Maybe (just maybe) some of the lubricant in the lens turned to a rubbery "goo" in the cold. If so, focusing by hand would be harder than usual. It might be worth putting the lens in the freezer (in a sealed plastic bag) for a couple hours and verify focus smoothness. If it is then stiff, I would try to have the lens replaced, preferably by one with a significant difference in the serial # to get rid of the problem.

Comment by pentaxian450 posted on K-5 not focusing in the cold? at 31/01/2012 - 00:07

pentaxian450
sledger wrote:
I cannot see any possible correlation with sensor hot spots and the swapping of lenses while powered on.
Swapping lens with the power on has nothing to do with hot spot, but since the sensor is electrically charge, it increases the chance of dust being attracted inside the camera and, eventually, making it's way to the sensor.

Comment by pentaxian450 posted on K-5 video hotspots work around (fixed) at 30/01/2012 - 15:15

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo