Mike Hibbert

Joined: 23rd April 2005

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

Mike Hibbert
Not a big complaint, but why did Pentax stop fitting the little pockets on the camera straps.

My old Pentax straps have two little pockets so that you can squirrel away your hot shoe protector and also keep your view finder cover. I hate to loose the litttle bits of plastic and putting them in your trouser pocket is the easiest way to loose them.

Comment by Mike Hibbert posted on Camera straps. at 07/10/2005 - 19:38

Mike Hibbert
George.

Unfortunalely the postal service here is less reliable than a carrier pigeon, and I believe that the last carrier pigeon was shot in 1892 by some one in America.

All mail goes via Moscow, where they open it/steal it/or just throw it away just because it is addressed to Tbilisi in Georgia.

Comment by Mike Hibbert posted on Printers??? at 31/07/2005 - 22:20

Mike Hibbert
I do not have online/internet print companies here.

hence my original question.

I could email them to UK and then have the prints sent over here, but our postal service is so bad they would rarely get here.

Actually I would be lucky to even email the pics, we still have that old thing called dial up connection here.

To put things into the correct perspective, last month I managed to get my telephone land line transfered to tone dial (at a great personal cost)

Up until then I was still on pulse dial.

In october I move to Baku and will then get broadband and hopefully internet printing services down there, but I still need a printer.

Comment by Mike Hibbert posted on Printers??? at 31/07/2005 - 20:26

Mike Hibbert
Sorry if I have missed any previous threads on this subject.

I was thinking of upgrading from my little old cheap HP printer, however due to it deciding to give up the ghost completely today I now need to upgrade.

Over here in Tbilisi he do not yet have the luxury of online printing facilities, we do have a Digital Kodak shop, however they just have the signs outside the front of the shop, the digital processing is not yet installed.

I want to be able to print up to A4 size max.

We can get most types of photo paper here so that should not be a problem.

Is there any way to protect the printed image, last time some one with sticky mits smudged the image.

As you can tell, my knowledge of printing digital images is limited, I was a standard film guy that only used digital for emailing pics for work etc, now I have the istd I want to start producing some good images that can be displayed.

We are limited to the number of different printers available in the shops here but they can order in any make or model in 14 days.

Thanks in advance for your advice.

Comment by Mike Hibbert posted on Printers??? at 31/07/2005 - 19:44

Mike Hibbert
I did not have/notice the problem before I upgraded the firmware, however I did not have a good play with all the settings until I had upgraded.

I usually switch on both the camera and the grip .

I will have a go this week trying it with and without grip/ grip switched on and off.

I supsect that it is just a glitch in the soft ware.

Comment by Mike Hibbert posted on Sticky thumb wheel problem. at 31/07/2005 - 21:23

Mike Hibbert
Well it is not physicaly sticking but electronicaly sticking.

I recently upgraded the istd firmware, then after reading a few threads on here decided that it would be a good idea to play around with the white balance settings rather than just use AWB, and what a difference it made.
Thanks to all that have posted advice on WB use.

However, for some unknown reason the thumb wheel stopped changing the settings, it was moving but the WB indicator was not.

I was rattling off shots quite quickly and at first thought that the camera was still writing to the card, so slowed down a bit and still had the same problem.

I have the battery grip fitted and found that if I used that wheel it would start to work again on both wheels.

Turned the lot off and on again, and again a similar problem.(this was yesterday)

Had another go today and it appears to have cured itself. Maybe just a softare glitch.

Just wondering if any others have had a similar problem.

Before you ask all batteries were new/fully charged and yes I did turn the dial to WB setting mode.

Ps be prepared for more posts from me, not realy had the chance to use the camera due to working away from home, I am now on vacation and get to use it proerly at last.

any advice appreciated, I might try and reload the upgrade if it happens again, just thought that I would ask on here first.

Comment by Mike Hibbert posted on Sticky thumb wheel problem. at 31/07/2005 - 19:24

Mike Hibbert
Thanks again George.

I will take your advice and go for the 1 Gb card.

I already have high capacity NiMh batteries.

I have a Centon (jessops) 95 pentax dedicated flash that i bought a few years ago, I know that it is not the best on the market, however I read on the flash section of this forum that it should work with the ist D.

At the moment I am still using my lap top, and prefer to use my card reader (pcmcia adapter) tonight I used the USB connector just to check that the software had loaded correctly, but I will use the card reader in future.

I am still reading the *** manual and after digesting it I will then attempt the firmware upgrade.

Thanks again..

Mike.

Comment by Mike Hibbert posted on A short introduction from Mike at 23/04/2005 - 22:07

Mike Hibbert
Thanks George.

Just been considering what I will need next.

I will be going for a larger memory card/microdrive and will also be looking for advice on photo printers.

I will be back in UK for a few days in May so I will have time to tap your brains before I get my wallet out again.

I must say that I was very impressed with Park Cameras. I ordered over the phone and had it delivered to my parents address in UK( they then sent it to me via our company mail bag), they had the body in stock but not the lens and battery grip, however by the time it arrived at my parent's house everything was there as per my order, and that was only 48 hrs later (they had managed to get the lens and battery grip as well over night)

I look forward to many more chats on here with you all, just need to upgrade my webspace so that I can start uploading some photos.

regards

Mike.

Comment by Mike Hibbert posted on A short introduction from Mike at 23/04/2005 - 19:58

Mike Hibbert
Well hello all.

I have been lurking in the background for a few months.

I have just received my ist D today. I purchased it from Park cameras after reading about them on here.

I started off years ago (22 years ago) with an ME Super, then unfortunatley had it and all my kit stolen, so went out and bought another one (slightly used).

Seven years ago then added a MZ50, and a simple point and shoot digital (Kodak).

I had been waiting for the ist D to come along for the last few years, however when it did arrive it was too expensive for me at the time.

Been waiting for the price to come down ever since and took the plunge a few days ago. It was delivered to my family UK address and then sent out to me over here in Tbilisi, just unwrapped it tonight.

Not had the chance to have a real play yet, but was instantly surprised at how easy the many functions were to operate.

Intro over, now be prepared for many questions from me in the future.

Mike H.

Comment by Mike Hibbert posted on A short introduction from Mike at 23/04/2005 - 18:48

Mike Hibbert
Probably old news now, but the Centon FH-95 does work on an *istD without blowing up anything.

I too was worried at first about compatability but after reading many threads on here and following some good links posted by the more informed members I had a play last night and works very well.

Comment by Mike Hibbert posted on Flash Compatibility (Again!) at 09/10/2005 - 19:40

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo