Lloydy

Joined: 20th January 2009

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

Lloydy
That's what I thought might be the reason, thanks for confirming it.

BUT......

I just checked a few other chargers and they show constant voltage that equates with the stated output. So now I'm confused. ( This is the point a fitter hits something with a BFH )

Comment by Lloydy posted on K10 battery charger output voltage? at 16/02/2010 - 18:17

Lloydy
I bought a new multimeter today and was sat here playing with it and I measured the voltage on the K10 battery charger terminals, and it's varying in approximately 1 second cycles from 2.49 to 4.33 to 6.68 volts.

I have checked the meter against other known voltages, AC and DC, and against my ancient AVO.6 ( I needed a new meter ! ) so I'm confident of the reading.

The detail on the base of the charger states "Output DC 8.4V"

Is this oscillating voltage because there's no battery in the charger?

I'm a mechanical engineer, not a sparky.

Comment by Lloydy posted on K10 battery charger output voltage? at 16/02/2010 - 17:30

Lloydy
The Ring of Kerry is gods country, it's where my wife comes from. Not all of it, but Cahirciveen.

The last time we were there we drove from Dublin to Kerry and then anti clockwise around the coast.
The only lens I owned at the time was the kit 18-55 and that gave me some great memories.

Comment by Lloydy posted on HOLIDAY CAMERA SET UP at 14/02/2010 - 23:25

Lloydy
Oh yes, the strands can and do come loose. But with a bit of canned air they disappear.

Comment by Lloydy posted on Vivitar Thyristor 2500 - dead! at 14/02/2010 - 00:02

Lloydy
This afternoon I was reading one of the photography magazines in Tesco's ( as you do when your wife is making monumental decisions about which loaf of bread to buy ) that had a review of the K-x and it basically reviewed it as a video camera, the reviewer certainly seemed to be more focused on that aspect of the camera.

Comment by Lloydy posted on gear freak overload.. (warning non-pentax crap)... at 13/02/2010 - 19:05

Lloydy
I got a whole pile of P Series filter holders, lens hoods and loads of rings from 49 to 72mm in a bag of 'assorted cameras and stuff' from a junk shop last week, so I've been looking for a selection of filters as well.

I've had stuff from 7dayshop.com before now, and I see they have a fairly good selection of P Series, does anyone know somewhere cheaper?

Comment by Lloydy posted on Cokin Z Pro and Lee Filters at 13/02/2010 - 18:50

Lloydy
Fixed it, it was the battery contacts - on the sliding door that you have to dismantle the unit to get at the contacts.

I used a RS Components 'propelling pencil' with abrasive fibreglass strands for contact cleaning.

http://uk.rs-online.com/web/search/searchBrowseAction.html?method=getProduct&R=0...

It's basically the tool for the job, it's not too abrasive and is handy for getting into tight places.
Maplins sell a similar one for £5-99

http://www.maplin.co.uk/Module.aspx?ModuleNo=3932

I've had mine for years and not worn it out.

Comment by Lloydy posted on Vivitar Thyristor 2500 - dead! at 13/02/2010 - 18:41

Lloydy
Are the manufacturers moving towards producing movie cameras that look like SLR's and can still take a still picture?

Personally, if I wanted to shoot movie, I would buy a dedicated movie camera. It's the reason why I would I wouldn't be influenced by the movie performance of a DSLR, and I would choose a DSLR on it's still picture capability.

Obviously there's a market for it or the manufacturers wouldn't be going headlong into it.

Maybe I'm a Luddite?

Comment by Lloydy posted on gear freak overload.. (warning non-pentax crap)... at 12/02/2010 - 23:04

Lloydy
My Vivitar 2500 has died, the light doesn't come on and there's no life at all. This is a decent flash, and I'd hate to lose it so is it worth repairing?

And more importantly, has anyone got any ideas of common fixes for these or someone who's good ( and cheap ? ) at fixing flash units?

I live in hope...............

Comment by Lloydy posted on Vivitar Thyristor 2500 - dead! at 12/02/2010 - 18:18

Lloydy
Albert
I see you are in Derbyshire, which isn't a million miles away from the Wolverhampton camera fairs that are held about 4 times a year.

http://www.wolverhamptoncamerafair.co.uk/

You've just missed one last Sunday, the next is on April 18th, and there's always a lot of old stuff going at decent prices.
I've come home with M42 lenses that I've paid as little as £2 for, some I've paid a tenner for! OK, they're not mint Takumars for that money, but they're lenses that I'm enjoying using and learning from. If I find a range of lens that I really like then maybe I'll buy some Takumars?

Comment by Lloydy posted on A bit of advice required. (help!!) at 11/02/2010 - 21:41

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo