kh1234567890

Joined: 13th September 2011

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

kh1234567890
Simonmac wrote:
Your Flicker posts are wonderful. I have always hankered after the 21mm and you have convinced me!
Thanks ! It is not the sharpest of the Limiteds (nothing like the DA35 Macro) but it is a cute little lens. The unusual hood does actually work quite well. If you do get one, buy a cheap slip-on 51mm plastic lens cap off eBay and put the hand-crafted, black felt-lined, all aluminium one that comes with it somewhere safe.

As for gkw - if you do get another 18-xx zoom, you'll only end up using it mostly at 18mm again !

Comment by kh1234567890 posted on 1st prime lens - a little help please at 20/02/2013 - 17:55

kh1234567890
DrOrloff wrote:
From what you haxe said the DA21 sounds mike it be worth a try. A downside might be that is only f3.2 An upside is that it is very compact, so perfect for walkaround.
I'd second that. I too had found that I was using the kit 18-55 WR at 18mm a lot of the time and that a 35mm was a bit too narrow. The DA21 is a nice little lens and is perfectly useable wide open at f3.2. Perfect for walkabout/street photos.

kh1234567890's photos tagged with da21 on Flickriver

Otherwise, if you are OK with manual focus, a £50 eBay Sigma 24mm f2.8 Super-Wide II might be a good starter. An AF version of this exists, but seems to be quite rare.

Comment by kh1234567890 posted on 1st prime lens - a little help please at 20/02/2013 - 15:21

kh1234567890
Smeggypants wrote:
kh1234567890 wrote:
Sensor stabilisation in action. In live view it is always on, otherwise it only moves the sensor between mirror-up and shutter close times. The sound will be much more noticeable with telephoto lenses in shaky hands

Enjoy your 50-200mm - it is a nice lens even though many review-reading pundits (who haven't actually used it) don't like it.
This isn't the case. The sensor is stabilised before the mirror up and shutter operation. You can see confirmation of this in the viewfinder display when the hand icon is lit. There wouldn't be time to stabilise the sensor between mirror up and shutter open/close.

Further the electromagnets that hold the sensor in position are always in operation even if the SR is disabled


The rattly noise that DavidHolmes is describing ( and which seems you are also experiencing ) isn't the shake reduction at all it's the solenoid holding the mirror up and or shutter open.
You are wrong - read the Pentax SR patents. But I can't be ar*ed to argue.

Comment by kh1234567890 posted on Noisy lens at 09/02/2013 - 16:14

kh1234567890
Sensor stabilisation in action. In live view it is always on, otherwise it only moves the sensor between mirror-up and shutter close times. The sound will be much more noticeable with telephoto lenses in shaky hands

Enjoy your 50-200mm - it is a nice lens even though many review-reading pundits (who haven't actually used it) don't like it.

Comment by kh1234567890 posted on Noisy lens at 05/02/2013 - 12:25

kh1234567890
Smeggypants wrote:
kh1234567890 wrote:
DOF is probably a bit of a misnomer with focusing screens. What really matters is the range of focus which will give visually perceived equally sharp VF image. That depends very much on the microstructure of the particular focus screen surface. With the Canon EE-s this range is much narrower than with the stock Pentax screen.
Well the range of focus is pretty much the DOF, so wouldn't agere it's a misnomer. The DOF as observed on the Stand pentax screen is wider than the real DOF from apertures larger than around, from my experience, f/2.0
The problem is actually the 'circle of confusion' parameter used to define a DoF. This is obviously different for an image viewed on a small viewfinder focusing screen with a given magnification and 'grain' size to that of a large print viewed at a given distance.

From a purely practical point of view, I find that the EE-s screen makes it much easier to accurately focus any manual lens, whatever the theoretical reasons may be.

Comment by kh1234567890 posted on Focusing manual lenses on K5? at 08/12/2012 - 22:34

kh1234567890
johnriley wrote:
That makes good sense. Isn't it something to do with the angle of the etching of the grain structure?
I gather that it is a lot to do with the size and roundness of the individual 'grains'
johnriley wrote:
I wonder if the depth of focus (that is, relating to the accuracy with which the screen position is placed) is small enough to make it an issue. Yet another potential source of error.
That is another factor to consider. The EE-s has a different thickness to the Pentax stock screen and a shim swap is usually needed. The good folks at focusingscreen.com provide one in their installation kit.

Comment by kh1234567890 posted on Focusing manual lenses on K5? at 08/12/2012 - 14:08

kh1234567890
johnriley wrote:
This seems to me to be a totally different subject, there is no DOF at the focusing screen anyway. The DOF is in the subject and the screen is merely where the lens projects its image.

It's not generally relevant anyway to modern AF lenses in general use, and probably only serves to confuse.
DOF is probably a bit of a misnomer with focusing screens. What really matters is the range of focus which will give visually perceived equally sharp VF image. That depends very much on the microstructure of the particular focus screen surface. With the Canon EE-s this range is much narrower than with the stock Pentax screen.

Comment by kh1234567890 posted on Focusing manual lenses on K5? at 08/12/2012 - 13:50

kh1234567890
Pentaxophile wrote:
Using simple language, people who have used special focusing screen like the Canon EES report that the out of focus blur seen through the VF is 'blurrier' than with the stock screen, making it easier to determine what is in focus. Comparing what you see with the stock screen, and the resulting picture at say f1.4, the standard screen doesn't actually give a completely accurate impression of DOF. You see narrower DOF on the picture.
The Canon Ee-s screen makes hitting accurate focus much easier even with slowish lenses. I have a 300mm f5.6ish mirror and with the stock screen pinning down good focus was always a problem, even with a magnifier. With the Ee-s it is a doddle. And of course it works really well with fast lenses.

Having spent years using manual focus I still find it difficult to do with AF lenses. There is usually little or no damping and the focus throw is of necessity far too short.

Comment by kh1234567890 posted on Focusing manual lenses on K5? at 08/12/2012 - 10:16

kh1234567890
What's the cheapest K-5 II bundle - i.e. what counts as a 'bundle' ?

Comment by kh1234567890 posted on K5 II - £100 Extra part-exchange! at 05/12/2012 - 22:56

kh1234567890
FastStone is really a viewer with some basic (but useful) editing tacked on. Great because it is free.

Silkypix Pro 5 is what I use most of the time. I like the interface and the results. The only quibble I have is in the way it handles clipped RAW highlights - the haloes round, for example, tree branches against clipped blue sky are annoying. It doesn't have any lens corrections built it.

Adobe ACR (as in Lightroom, PS, Elemements etc.) is nice in that the 'Auto' setting works most of the time. And it is very good at rendering those pesky clipped skies. The interface is a bit dated though. It has a nice set of lens corrections which usually work well.

RawTherapee is a geek masterpiece in never-ending development. It has the best demosaicing available, but there are far too many options and tweaks. Probably a bit daunting for a beginner.

Pentax PDCU is not bad but the interface is terrible and the only connection to SilkyPix seems to be in that it uses an old SilkyPix demosaicing and rendering engine. It understands your Pentax camera settings and will process your RAW to look like your camera JPEG. You might as well shoot RAW+

Comment by kh1234567890 posted on RAW processing at 28/11/2012 - 11:47

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo