kh1234567890

Joined: 13th September 2011

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

kh1234567890
Horst wrote:
There is really no reason why it should be somewhat larger, if at all then say the K5 is. All it needs is a larger sensor and a larger mirror.
But this should fit in to the existing body size. The Film cameras had the full 35mm size and a larger mirror and Pentax often had very small bodies.
You also have to scale up the sensor movement shake reduction mechanism. This may or may not scale up easily - the 645D does not have it.

You could save quite a bit of space inside the camera by not having the inbuilt flash - the flash capacitor takes up a fair bit of room - but I suspect that the marketing people would be in uproar if the designers suggested that.

Comment by kh1234567890 posted on Pentax Full Frame, Will it ever happen. at 20/05/2013 - 16:35

kh1234567890
Smeggypants wrote:
I found the Imaging resource test of the K-30 and they claim 12.5 stops of DR compared to 13 stops at DXO.
That is the maximum numerical range found in the RAW file (maximum possible value - lowest recorded intensity number). The actual useable range (based on SNR) is always less.

In practice, by the time you've gamma mapped, it makes little difference, if you get your exposure right. A good print (or monitor display) will rarely need a bigger than 1:100 intensity range. Otherwise it will look flat and boring.

Comment by kh1234567890 posted on Maybe light at the end of the tunnel? at 15/05/2013 - 19:21

kh1234567890
Smeggypants wrote:
Incidentally looking at the DXO tests of dynamic range of the K-30 V. K-5 there's slightly less than 1 stop difference @ ISO100. The K-30 is shown has having a DR or 13EV = 13stops = 13bits
DxO are a bunch of clueless clowns. Don't believe anything they say. Imaging Resource did some proper tests.

Comment by kh1234567890 posted on Maybe light at the end of the tunnel? at 15/05/2013 - 18:03

kh1234567890
Since the much of the red is saturated in the jpegs, there is nothing that will bring back any detail in those areas. With RAW you might have a chance, especially if you underexpose a touch. Given the constraints of card memory space at the time (for whatever unfortunate reason), I'd have still gone for shooting RAW and mercilessly deleting any obviously bad shots there and then. Another option might have been to switch to Adobe RGB colour space with its wider gamut.

Comment by kh1234567890 posted on K30 jpg very poor at 13/05/2013 - 14:35

kh1234567890
Shoot RAW or RAW+ next time. Pentax is usually not too bad at capturing reds

Comment Image

Stockport 5 Tram by kh1234567890, on Flickr

Comment by kh1234567890 posted on K30 jpg very poor at 13/05/2013 - 00:21

kh1234567890
While I can see that this is clearly aimed at newcomers to Pentax SR, Pentax would be much better off writing a techie white paper on their SR, which is something that they should be proud of. As always, unless you understand how something works you are going to have a hard time figuring out why it sometimes doesn't

Comment by kh1234567890 posted on Shake Reduction and 'action' photography at 13/05/2013 - 00:15

kh1234567890
Smeggypants wrote:
When not in live view there's power being used to hold the sensor in the centre position, and when SR is off.
According to the timing diagram in Fig.8 of one of the patents the sensor is only driven in the interval between mirror up and mirror down.

Comment by kh1234567890 posted on Shake Reduction and 'action' photography at 08/05/2013 - 23:49

kh1234567890
johnha wrote:
If you switch on live view and pan the camera (K-5) smoothly, you'll see that the image only seems to 'jump' when you start or stop panning. Suggesting that as long as you start early and follow-through afterwards, you might get benefit of SR (although it might affect the effectiveness of smoothing vertical movement - if that makes sense).

Generally SR seems to be more effective with higher frequency vibration than lower.
Remember that SR functions differently when in live view, in that the sensor is being moved all the time - when it is about to hit the movement limits or the camera movement stops it re-centers. Hence the jumps. That is also why live view with SR on uses much more power. In viewfinder view mode the sensor is centered at mirror up time and is only moved during the actual exposure.

Comment by kh1234567890 posted on Shake Reduction and 'action' photography at 08/05/2013 - 23:25

kh1234567890
Mandrake wrote:
Interesting - where did you find the information about the gyro sensors? I'd be curious to find out more if a more technical breakdown of the SR system has been published somewhere than the usual marketing guff that just tries to dazzle you with buzzwords.
Patents are usually a good start, if you can get your head round the patent agent speak

Comment by kh1234567890 posted on Shake Reduction and 'action' photography at 08/05/2013 - 23:18

kh1234567890
I suspect that the success or otherwise of SR during panning is largely down to the panning technique. The camera detects movement ('shake') using three angular velocity gyro sensors (not accelerometers). The signal is high pass filtered - i.e. only angular velocities above a set value are used. Hence panning should not affect SR as long as the pan rate is low enough or if it is a translational pan rather than a rotation (the sensors do not detect linear velocity).

So, rotating your whole body rather than just the camera should have a better chance of success.

Comment by kh1234567890 posted on Shake Reduction and 'action' photography at 06/05/2013 - 01:16

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo