kh1234567890

Joined: 13th September 2011

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

kh1234567890
Smeggypants wrote:
Higher dynamic range gives you finer tonal graduations, i.e a smaller difference in value between pixels.

For example an 8bit per channel (JPG) images gives you 256 steps per channel while a 16bit TIFF gives you 65,536 steps per channel. That's a 16 stop range versus an 8 stop range.
It is not so simple. JPEG would be gamma mapped whereas the 14 bit RAW isn't.

Anyhow, I still can't see how the minimal (1.2+ times) increase in sensor resolution from K-5 to K-3 can suddenly require a new set of picture taking skills. If so, then a Nokia 41 megapixel phone camera with a cr*p lens could not possibly work

Comment by kh1234567890 posted on How much more demanding of good technique is the K-3? at 29/11/2013 - 18:48

kh1234567890
robbiec wrote:
So I was browsing through the various forums and noticed a rash of my K-3 is soft, my lens must be fault, you know blame it on everyt hing except yourself while at the same time uploading images to prove your case.
I noticed when I swapped from a K20D to the K-5 that the latter was far less forgiving when it came to handling my ineptitude and it took me around a year to step up and regain lost confidence. Anyway my question is this; is the K-3 more demanding from the photographer skill set and technique wise to deliver its full potential than the previous generations?
As usual that particular discussion on dpreview had degenerated into a tedious flamefest. The K-3 should not require any particular ninja-like skills to get presentable shots, after all the sensor resolution is only some 1.2x more than that of a K-5 sensor. There is obviously something up with some of the production units and I would suspect firmware bugs in the overcomplicated new phase detect AF/tracking system. Should be simple to pin down by a process of elimination - use LV, turn SR off, or just focus manually on a dog turd on a pavement and see what ends up in focus ...

Unfortunately many of the respondents there do not actually have a K-3 and prefer to endlessly pixel-peep the few posted fuzzy images and regurgitate various Internet myths.

That would not happen here, would it ?

Comment by kh1234567890 posted on How much more demanding of good technique is the K-3? at 29/11/2013 - 15:38

kh1234567890
Smeggypants wrote:
What I'd like is to centre focus on a subject, and then let the camera track focus on that subject while I recompose and the subject distance changes. Now that would be good. I dunno if even the K-3 can do this????
Basically this technology had reached a dead end since you can't have focus points outside the central area of the frame because you can't make the secondary mirror any bigger. Phase sensitive points on the sensor are the only way forward, something which Pentax/Ricoh do not have.

Comment by kh1234567890 posted on K-3 Vs. K-5iis at 27/11/2013 - 10:06

kh1234567890
stevejcoe wrote:
The Developer Studio Pro version of Silkypix does most of what LR does, but you have to work at it and the interface is still very clunky, though it runs quite well on a very antiquated PC that I installed it on.
I use Silkypix Developer Studio Pro 5 most of the time and I find the interface very intuitive. The main problem is that is missing automated lens aberration corrections and its highlight recovery is not as good as Adobe ACR. But moving sliders with the mouse wheel works in DSP whereas I could never get it to work in ACR

Comment by kh1234567890 posted on Silkypix Developer Studio Pro 5.0.50 K3 PEF Support at 25/11/2013 - 01:28

kh1234567890
robbiec wrote:
As much as we look back to the good old days or lens series in this instance with rose tinted glasses, progress and technology rarely stop.
The ancient, manual lenses are best left to old farts stuck in the past who still like to use the focus ring on and don't see the need for dozens of aspherical computer designed nanocoated bits of glass mounted in an overpriced cheap plastic body and not even passably sharp in the corners when wide open.

Comment by kh1234567890 posted on Where Do We Draw The Line? at 09/11/2013 - 17:21

kh1234567890
bjolester wrote:
I use lenses with the Pentax K mount on my DSLRs. So I draw the line between M42 and K mount. I especially enjoy using SMC-K lenses, and do not regard lack of "A" setting or manual focus as any problem at all. The SMC-K lenses (especially) have an impressive build quality, and they perform marvelously, so I regard them as great photographic tools, not as vintage collector items. In fact, I am less confident when I walk around with some of the more modern Pentax plastic lenses. They seem much more frail.
+1

On eBay 'vintage' or 'collectible' usually equates 'overpriced'. I cringe whenever I see pictures of 'collector's' hoards of lenses, especially when it is obvious that they've never actually used most of them.

For Pentax I would draw the line between M42 and K mounts - anything with a K mount is eminently useable with the minimum of hassle.

Comment by kh1234567890 posted on Where Do We Draw The Line? at 09/11/2013 - 14:21

kh1234567890
McGregNi wrote:
Of course the photographer has to keep things in the central area of the frame, but I wonder if that's what they tend to do anyway now?
You could be right. We have lenses which are soft outside the centre unless stopped down and people still buy them to put on their shiny new camera bodies which also then only focus at the frame centre.

I have a feeling that Ricoh would rather do away with optical viewfinder altogether - the K-3 manual alarmingly skims over its features and concentrates on the live view gimmicks. Hardware design requires ingenuity and skill, software code monkeys are cheap ...

Comment by kh1234567890 posted on The new standard of performance - K3 shoot. at 05/11/2013 - 17:52

kh1234567890
McGregNi wrote:
There is a lot of new learning (and 'programming' :wink for people with the K3 system. In continuous mode you can now choose a varying 'array' of points, which you can effectively move around to create an off-centre position for the array, which can be 3x3, 5x5 or 7x7 I understand. Very amazing stuff. In AF.S you can also reduce the active point array to 3x3, 5x5 or 7x7 also I believe.

Its the application of it all I guess that will be the real test of its usefulness. I wonder if those who shoot action and were looking for improved tracking will actually explore these new options, or just prefer to stick with the defaults?
What is the point of all these software gimmicks when the focus points are still crammed into the centre of the frame ?

Comment by kh1234567890 posted on The new standard of performance - K3 shoot. at 05/11/2013 - 17:08

kh1234567890
Why don't they make them like that anymore ? It is a cunning piece of mechanical origami

Comment Image

Broken by kh1234567890, on Flickr

I must use it more, rather that its little sister the M 135/f3.5.

Comment by kh1234567890 posted on Pentax M 75-150mm Zoom at 04/11/2013 - 23:23

kh1234567890
All that you really need is a bit of string with a weight on it and some decent software Quick and easy.

Comment by kh1234567890 posted on Panoramic head at 29/10/2013 - 08:21

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo