JohnX

Joined: 9th February 2009

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

JohnX
womble wrote:
...if anything is worth doing to hi res I do it myself.
Thanks for your reply. What scanner do you use?

As you'll see from my post I'm looking to eventually digitise the whole of my film collection.

Getting a 3rd party to do it would be easier but could prove prohibitively expensive so investment in a decent, fast, scanner could be on the cards.

Will still need the new film(s) processed though.

Comment by JohnX posted on Film - developing and transfer to CD. Recommendations? at 22/09/2010 - 23:07

JohnX
fatspider wrote:
If you intend to do a lot of film work you would be better off investing in a film scanner, my experience of having film scanned to disc by a lab has not been a very good one, I bought a cheap scanner from Jessops and the results were twice as good, unfortunately it broke
I have a couple of scanners - one is a Primefilm PF3600u, the other a Summit Photofix, which I suspect will be similar to the Jessops one you refer to. Tried using them but (a) too slow, and (b) not impressed by the results.

Besides, I have hundreds of sets of either 24 or 36 exp 35mm film negs, a good few dozen APS films and thousands of 35mm slides! I'd like to kick off transfer to digital of this whole collection with the two films I've just run though my MZ-7

Comment by JohnX posted on Film - developing and transfer to CD. Recommendations? at 22/09/2010 - 23:01

JohnX
So, blew the dust off my MZ-7, took two rolls of film, now can't find anywhere to get the film processed and transferred to CD.

Can anyone recommend any firms please?

Do the likes of Boots, Asda, Tesco do this sort of thing, or does it have to be a specialist outfit? (I've seen Darkroom UK mentioned in other threads).

Comment by JohnX posted on Film - developing and transfer to CD. Recommendations? at 22/09/2010 - 22:44

JohnX
Gwyn wrote:
That looks interesting John. Exactly what I was hoping to do. Where did you buy the Sling strap kit?
Here> http://www.jackthehat.co.uk/

I've bought a few things from them - always good prices and service. In fact, I bought my OpTech Pro strap from them originally. When I saw the sling strap kit in a photo mag I emailed Jack The Hat to enquire if they had them. They promptly ordered it in on a 'no obligation' basis; I bought it!

There's another thread on the forum (last 2-3 months) where there was some discussion about similar 'sling' type straps.

Comment by JohnX posted on Aftermarket strap recommendations? at 21/09/2010 - 11:41

JohnX
OpTech for me too.

Their new strap could be of interest > http://optechusa.com/utility-strap.html.

I've up-graded my Pro strap to this spec, by buying their System Connectors Sling Strap kit (1301242), but haven't tried it out yet. The idea is the camera hangs by your hip and can be brought up to the eye quickly and securely. Uses existing camera strap connections so (like me) you can leave your tripod adapter in place on the camera base.

OpTech say this Sling Strap kit converts most of their straps into an over-the-shoulder sling.

Comment by JohnX posted on Aftermarket strap recommendations? at 20/09/2010 - 20:23

JohnX
PM sent

Comment by JohnX posted on spyder 2 moniter calibration tool with cd & reg number at 18/09/2010 - 22:39

JohnX
Weldingblues wrote:
Its "work" but I will become a consultant so I need this data.
In that case I'd go for two portable HDD's plus a PC or laptop. Use the PC or laptop as the 'master', then copy data to both of the portable HDD's on a regular (daily!) basis, leaving one at home and either (a) have the other with you, or (b) leave it with a relative or friend.

ANY device can malfunction, so a minimum of two backup copies has always been my rule, one of which is always 'off site'.

Comment by JohnX posted on Data Storage at 14/09/2010 - 14:40

JohnX
I use two normal HDDs, but without context to the question it's difficult to answer. Is the backup for you, or for 'work'?

If 'work', let them worry

Comment by JohnX posted on Data Storage at 14/09/2010 - 13:58

JohnX
Mannesty wrote:
I haven't found any solution to B/F focussing that describes how to correctly adjust the camera when a zoom lens is used. Would you test at max. or min. zoom?
Canon suggest that adjustments should be made at the long end of the zoom range, using a target positioned at a distance of at least 50x the focal length.

Our own (ex-) Richard Day tests at wide, mid and long ends of the zoom range, at long, middle and near distance, then averages the result! He mentioned it in one of his posts.

Comment by JohnX posted on Spyder auto-focus calibration at 04/09/2010 - 18:25

JohnX
PM sent re flash

Comment by JohnX posted on FS:GX20+Grip,K100D Super, DA Limiteds and more at 04/09/2010 - 17:29

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo