jeallen01

Joined: 12th February 2009

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

jeallen01
@HarisF1

Remaps can certainly take their toll on ageing clutches, and DMFs in particular. The Octy had about 103k miles on the clock before being remapped, and the additional power certainly shortened the DMF life. OTOH, I was rather stupid after the remap and ran it a lot at low revs as it had much more torque, and that made the DMF suffer a lot.

A remap to about 130-140 bhp at just over 100k miles on the previous Golf Mk IV 1.9 TDI did the same for that and it soon began to slip under heavy load and needed a new clutch & DMF a few thousand miles later. OTOH, never blew the turbo on that car, and it went on to do over 150k miles for me and then my neighbour before it developed multiple other issues (alternator, and then, probably, a porous cylinder head) and so he scrapped it.

PS".. 120-140bhp..."? - you need MUCH MORE power!

The company which did the Octy could probably do that. PM me if you want to know their name - they are brilliant because not only is the Oct much more powerful, but it also has incredibly smooth power delivery from tickover right to the top of the rev range (about 4000-4500 RPM - it's a diesel after all!) and the mid-range is "stunning", and thus is very driveable around town, on the motorway, and anywhere in between.

Comment by jeallen01 posted on Another pointless thread at 27/12/2018 - 20:19

jeallen01
HarisF1 wrote:
Car turbo finally gave up the ghost.. I'm getting a wooooooo sound at every blip of the throttle...
"..woooooo sound..."? - That's "Nothing"!

Blew the turbo on my remapped (170-180 bhp now) 2007 Octavia TDI 2l Estate about 4 yrs ago when having an "ill-advised" road-rage moment with a Merc that was "annoying me" on a slippery roundabout exit with traffic lights:
- 1st Gear & boot to the floor = lots of wheelspin
- 2nd gear & same thing, but the engine felt a "little flat"
- anyway, 3rd gear and the same thing - until the engine died and we came to a halt with HUGE cloud (you couldn't see through it) of oily black smoke out the exhaust at the next set of lights

Short version of the story of the following 2-3 weeks:
- Britannia Rescue took us home (only about a mile)
- It happened just between Xmas & the New Year, so couldn't get a really well-built recon unit and had to get one via the local ECP, and that was fitted by a mechanic mate of a friend of mine just after the New Year.
- that lasted all of 50 miles of gentle driving before it began to rattle very ominously!
- another trip to the mechanic (cost £60 each time for a transporter), and THIS time he thoroughly cleaned out all the turbo boost and oil feed pipes - which he might not have done the 1st time!
- engine then running OK, but was "tappety" (shouldn't as it has hydraulic lifters!) and so needed a complete set (16 as it's a 16V engine) of new lifters due to the engine having hit valve bounce at least twice during the "road rage moment".
- total cost was well over a £1k, and it took about 4 months and a couple of thousand careful miles until I was confident that the engine & turbo were now OK.

PS: ever seen a "really blown" turbo? In the one that blew, the turbo shaft and vanes had become completely detached from the turbo body!!

PPS: at one point I had thought the engine had probably totally "lunched itself", and was very surprised to find out that the damage was limited to that described above, and it's now done another 20k miles (now @ 127k miles) and runs brilliantly

PPPS: 2 months after the turbo trouble, the clutch went = another £700 for a new clutch and DMF!

Comment by jeallen01 posted on Another pointless thread at 27/12/2018 - 19:07

jeallen01
Sigma Imaging UK "come up trumps" (not "Trump" ) again - as usual.

Comment by jeallen01 posted on Broken Sigma Zoom Mechanism - Advice Needed at 12/12/2018 - 09:13

jeallen01
DaveKitson wrote:
I wonder if Symantec ever manage to sell anything at the RRP considering the range of discounted prices on offer from various outlets..

davek
Well, they probably do when sold through Currys PCWorld at the RRP

Comment by jeallen01 posted on Amazon - Norton Internet Security 10 User Download licence - £17.99 at 19/11/2018 - 21:55

jeallen01
Gwyn wrote:
Or just use one of the many excellent free anti virus progams, or even rely on W10 security, which is also very good, and save your money towards some new gear .
W10 security (Defender et al) alone ain't" that good "- virtually all A/V comparison tests confirm that

Comment by jeallen01 posted on Amazon - Norton Internet Security 10 User Download licence - £17.99 at 19/11/2018 - 21:49

jeallen01
pschlute wrote:
That is a good deal.

I don't think I will go for a flipside again though. The straps are always in the way when I unzip/zip the camera compartment.
I went from a 350 AW to a 450 AW Flipside (bought from a forum member ), and, generally, I like it - but I agree that the straps for the zipped lid on the main compartment do pull the lid down when I would rather it would stay open. Very comfortable to wear though, and it does seem to hold more than the 350AW.

Comment by jeallen01 posted on Lowepro Flipside Trek 450 AW deal of the day on Amazon at 19/11/2018 - 20:23

jeallen01
https://www.amazon.co.uk/Norton-Security-Antivirus-Included-Activation/dp/B016A2...=sr_1_1/260-0302868-2987750?s=black-friday&ie=UTF8&qid=1542625708&sr=8-1&keywords=norton+security+10+user
Buy now, but don't need to activate until you actually want to - so you can let your existing A/V cover "expire" before you activate this.

Comment by jeallen01 posted on Amazon - Norton Internet Security 10 User Download licence - £17.99 at 19/11/2018 - 11:12

jeallen01
In case anyone is still looking for one of those, there are several on ebay from Japan & the US - not very cheap though!

Comment by jeallen01 posted on Sigma 50-500 HSM Pentax Fit at 21/10/2018 - 16:08

jeallen01
@Algernon

Not just Samsung cameras no longer "with us" - only just found out that Samsung sold its printer division to HP in 2016, and there's me having moved from HP laser monos to Samsung laser monos a couple of years before that!

Comment by jeallen01 posted on Dear Pentax, this is good bye. at 17/10/2018 - 21:23

jeallen01
Unfortunately, "possibly so"

Comment by jeallen01 posted on Broken Sigma Zoom Mechanism - Advice Needed at 15/10/2018 - 11:09

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo