All Forum Comments
Comment by golfdiesel posted on name that camera? at 24/04/2008 - 17:56
This is for me a great tripod, it is very stable. The only thing I would have liked are built in spirit levels. But that can be solved by a hotshoe mounted spirit level, allthough you can't use the flash then.

Comment by golfdiesel posted on what tripod? at 17/05/2008 - 17:03
Comment by golfdiesel posted on Sensor cleaning - again! at 13/04/2008 - 18:32
Indeed it isn't cheap but it is worth every cent.
I have the butterfly and a rocket blower which keeps my sensor clean without the need of chemical solvents and/or compressed gas, so it is both easier to use and better for the environment.
Comment by golfdiesel posted on Sensor cleaning - again! at 13/04/2008 - 17:36
The unit was set to display only full stops so it was rounding the values. I had to set the unit to the default settings which use 1/10th stops.
I will now start to test and experiment if I need to give the Minolta an offset or not to match it to the sensor of my *ist-DS.
Working with a unit like this really makes you think more about lighting and gives a better understanding on exposure settings. I have only worked with (semi)-automatic camera's and that causes you to stop thinking.
Comment by golfdiesel posted on lightmeter at 20/04/2008 - 22:00
Comment by golfdiesel posted on lightmeter at 20/04/2008 - 14:18
I just want to know the following, I normally work my camera in Aperture priority mode to have control over the DOF.
When I take a measurement with my Minolta meter at a given exposure time and then change that time to get to the desired aperture value is that then the correct exposure?
for example:
at a exposure time of 1/250 it gives me an aperture of f5.6, but I want to take that shot at f8. I change the exposure value on the lightmeter to 1/160 and then the aperture value is at f8.
Am I correct that the combintation 1/250 and f5.6 will give the same exposure as 1/160 and f8 (just with a different DOF)?
Comment by golfdiesel posted on lightmeter at 19/04/2008 - 20:37
I got it for about the same price as a lot of the lower spec new units.
Comment by golfdiesel posted on lightmeter at 16/04/2008 - 10:40
It is Euro 199,00 (US$ 293)
It is this unit:

The specs are the following:
The measurement range for flash at ISO 100 extends from f/4.0 to f/90.9 in 1/10-stop increments, with shutter speeds adjustable from 1/1000 s to 1 second. Continuous light can be measured at ISO 100 over a range from f/1.0 to f/90.9 in 1/10-stop increments, with shutter speeds adjustable from 1/8000 s to 30 minutes. Continuous light can optionally also be measured as exposure values from EV -1 to 19.9. The values are easily read off from the LCD panel. The measurement head pivots 270°. Film speed can be set over a range from ISO 3 to 8000. The meter operates on a commonly available
3V battery. A power-saving circuit automatically shuts off the meter and its LED display when not in use in order to extend battery life.
The VISATEC FM 2000 can be used for both subjet and light metering; in the latter mode, the measurement angle can also be controlled. For filmmakers, the FM 2000's ability to measure EV and aperture at a preselected frame rate is very useful. The compact unit weighs 102 g (without battery) and is supplied with a neck cord and case.
Comment by golfdiesel posted on lightmeter at 09/04/2008 - 21:46
I love my polaris flashmeter.
It's cheap, acurate to 1/10 stop and can be calibrated to match your sensor!
it has a pc socket, and can do incident and reflected settings for corded, cordless, flash and ambient light readings.
I tested it against my photo instructors sekonic (costing 3x as much) and it is accurate.
Comment by golfdiesel posted on lightmeter at 09/04/2008 - 13:32


just a guess but does the camera stamp its serial no into the EXIF?
PhotoME ( www.photome.de ) will show a lot more besides the camera serial number... including the temperature at the time of shot!
There must be something that can pick that out and sort it...
Matt
A nice view is the graphical representation of the EV values for each of the 16 metering segments.
For what reason would the camera use the internal temperature?