golfdiesel

Joined: 12th January 2006

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

golfdiesel
I have found that the "Lens Aberration Controller" in Silkypix allso does an excellent job in removing CA if it exists.
The Photoshop method will probably be a little more accurate but the Silkypix method is very quick.

I will have a go at the mentioned Photoshop methods as well.

Comment by golfdiesel posted on Purple fringing on DA 16-45mm? at 12/01/2009 - 08:47

golfdiesel
Don wrote:
I skipped the k20 entirely.
hoping the next big thing from Pentax will be worth upgrading from the k10's....
I did the same with the K10D. I had a *ist-DS and I was temped to get a K10D but I waited a little and got a K20D instead.
With most technologies I skip a generation before considering buying a new one.

The same goes for computers, I skip a complete processor generation before buying a new computer (mostly about every 4 years)

Comment by golfdiesel posted on Latest from the rumour mill...... at 11/01/2009 - 21:46

golfdiesel
I would suspect that non-A 'K' and M42 lenses will have some problems with the exposure metering of the K-m.
The *ist-DS and probably the DL are the last bodies which have correct metering with non-A 'K' and M42 lenses.

Comment by golfdiesel posted on Anyone got a K-m? at 11/01/2009 - 21:42

golfdiesel
Finally we had something resembling a winter overhere...

Comment Image

Model: PENTAX K20D
ISO: 100
Exposure: 1/40 sec; Aperture: f/16.0
Pentax DA50-200 @ Focal Length: 80mm

Comment Image

Model: PENTAX K20D
ISO: 100
Exposure: 1/125 sec; Aperture: f/11.0
Pentax DA50-200 @ Focal Length: 115mm

Comment Image

Model: PENTAX K20D
ISO: 100
Exposure: 1/250 sec @ Aperture: f/5.6
Pentax DA50-200 @ Focal Length: 125mm

Comment Image

Model: PENTAX K20D
ISO: 100
Exposure: 1/125 sec; Aperture: f/13.0
Pentax DA50-200 @ Focal Length: 200mm

Comment by golfdiesel posted on Winter in Holland at 11/01/2009 - 21:19

golfdiesel
Just a brief question and I have added a poll.

How do you set the whitepoint of your LCD monitor when you profile a monitor.

I had my LCD at 6500K before, but I found out that the display wasn't really stable at this setting. I had to profile quite often to keep consistent results.

I have now switched to a native whitepoint which according to my i1 is 3900K. The results seem to be more consistent over time.

Comment by golfdiesel posted on Monitor calibration at 11/01/2009 - 17:14

golfdiesel
misiek_knm wrote:
Any rumours on the differences between K20D and K30D?
I suspect GPS as one of the features because there were allready rumours about a K20D Mk-II with an added GPS receiver.

Higher resolution APS-C? I don't know if there is allready a higher res CMOS in this size.

Comment by golfdiesel posted on Latest from the rumour mill...... at 11/01/2009 - 16:43

golfdiesel
Hardgravity wrote:
Thanks for all the help, turns out the disk had died.

There was no way to retrieve the data, shame.

Still a new drive under warranty and at least 2 backup systems will be in place from now on
Didn't you have all the photos stored on the PC itself or do you remove them from time to time?

Comment by golfdiesel posted on NOOOO!!!! at 11/01/2009 - 16:17

golfdiesel
Trying it with Knoppix or a Ubuntu LiveCD will be a good idea.

The first thing I would do is opening the enclosure and getting the disk out of there. Look for the manufacturer of the disk and get the diagnostic software from the manufacturer of the drive (every harddrive manufacturer has this software). Follow the instructions and you might be able to salvage the data on the disk.
If the software brings the disk back to life, the first thing to do is that you create a backup of the data. After that throw the disk away, it is not worth using it anymore since it has allready failed once.

You could allso download the UBCD or Ultimate Boot CD, it has all the diagnostic software you need for testing harddrives.

Comment by golfdiesel posted on NOOOO!!!! at 11/01/2009 - 13:24

golfdiesel
daphnejohn wrote:
I use the 10mp K10D, but take most shots at 6mp, mainly to save hard disk space. (I take a lot of photographs!) I notice little difference between 6mp and 10mp for normal family or hobby shots on the computer screen or in an A4 print, although if someone asked me to photograph their wedding, for example, obviously I would use 10mp to be on the safe side.
Since 1 TB drives go for as little as 80 Euro's I wouldn't thing about dropping the resolution of my K20D to a lower setting.
I have allways used a simple strategy, drive full, buy bigger one...
Storage is very cheap these days and there will be a day that you will be angry at yourself that you didn't take that picture at the full resolution of the sensor...

But to get back on-topic. For printing 8x10 the 6MP Pentax DSLR's will do the job but the higher resolution sensors give you some extra room when cropping.

Comment by golfdiesel posted on Advice please at 11/01/2009 - 12:48

golfdiesel
I keep everything on the computer, when the drive is full I get a bigger one.
I backup everything onto a external drive about once a week and after doing a lot of work.
I ocassionally, about once a month, backup everything to another external drive which I keep at my parents house.

The next thing I am going to get is a imagetank to backup memory cards when on holiday.

I never remove important stuff from the drive in the computer. I have two drives in the PC, one for the OS and apps and a second one for data. So if the OS drive fails I still have the data on the other one.

Comment by golfdiesel posted on NOOOO!!!! at 10/01/2009 - 15:31

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo