George Lazarette

Joined: 14th January 2004

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

George Lazarette
To be perfectly honest, the GX10 is a rose by another name. The only real difference between the two cameras is that the fimware (the internal software) is different. The Samsung version allegedly gives slightly sharper pictures (JPEGs) at the expense of overall picture quality. In RAW, the output is presumably identical.

It's a huge price difference, and if I were not a diehard Pentax fan, I would probably buy the Samsung. And before I am banned from the board for treachery, I would hastily add that Pentax no doubt makes money from every Samsung sold.

One more point. The price difference will be carried over into second-hand prices, I would expect, so if you sell within a couple of years you should expect to get more for the Pentax.

G

Comment by George Lazarette posted on Samsung GX10 at Argos! at 21/01/2007 - 10:22

George Lazarette
The top Sigmas are allegedly pretty good, but you can never be certain that they will work on your next camera.

The Pentax 50-200 is well regarded for such a modestly-priced lens, and I would swap it for your Sigma if you can.

My rule of thumb is never to put a third-party lens on my camera unless it is indisputably of the very highest quality. Currently my only active non-Pentax lens is the legendary Vivitar Series 1 70-210. However, I'm not sure that it's really much better than my Pentax-F 70-210, which itself is very highly regarded by many.

But if you are interested in branching out, I suggest a quick trip to Ebay for any Pentax 50mm lens. You will be bowled over by the quality, and the manual focus ones will cost you no more than a couple of rounds of drinks.

G

Comment by George Lazarette posted on What Lenses can you reccommend for K10D ??? at 19/01/2007 - 14:27

George Lazarette
Quote:
thanks George,

I agree with your thoughts over the sony A100 comment i was thinking on the same lines.


So George havnt got a clue whats gone on here (bulls..t) springs to mind

Pete
P**s-take is the word.

G

Comment by George Lazarette posted on New K10D V1.10 Firmware at 19/01/2007 - 14:18

George Lazarette
Quote:
thanks guys

the reason i mentioned dodgy (perhaps not suitable would have been a better word) is because i have read in the forum someone has upgraded and instead of displaying pentax on the start up it says Sony A100

????

Another issue ?? How can we be so sure this new update will be available in a few days. Who is telling us this ? is it a 100% reliable source and as i said there is no mention on pentax website

Pete
Are you serious? That stuff about Sony was a joke! It was aimed at the nitwits who thought the whole thing was a conspiracy.

Did you also believe the one about the camera rushing round the house shouting: "Give me film"? That was a joke, too.

The documentation that comes with the firmware says release date is 23 Jan 2007. Of course, it could always change, but it's all we can go on at present.

DPReview is run by a chap with a perfectionist streak, who believes in detail, detail, detail. He can never see the wood for the trees. As a result, the site attracts all sorts of weirdos with similar hang-ups, people who worry about every tiny detail. Most of them can't cross the road unaided.

There are a few sensible posters, but most are so stupid they just depress me. You should always take whatever you read on DPReview with a pinch of salt. That goes for the official stuff as well as the forums.

If you want down-to-earth, common-sense, advice, written in comprehensible English, this forum is a good resource. John Riley is especially good on general photographic knowledge, whilst Matt is superb on digital imaging.

There are many other people here with valuable experience to offer. All you have to do is ask. Just don't blame the camera when you produce a bad picture.

DPReview will fry your brains. Just read a few posts there if you need confirmation.

G

Comment by George Lazarette posted on New K10D V1.10 Firmware at 19/01/2007 - 12:56

George Lazarette
I don't think it is dodgy (the pixel-peepers' apocalyptic prognostications can safely be ignored) but there is a slight chance that the final version could be slightly different, so to be sure you have the latest, you would have to upgrade twice.

If the final version wasn't due for a month or two, I would upgrade now, but for the sake of a few days there is little point.

G

Comment by George Lazarette posted on New K10D V1.10 Firmware at 19/01/2007 - 12:20

George Lazarette

Comment by George Lazarette posted on New K10D V1.10 Firmware at 19/01/2007 - 12:07

George Lazarette
Quote:
Excelant news

Maybe Pentax ARE reading this forum and taking notes .

.......now what else do we need
Simple. The 16-50 1:2.8 should be priced at £800.00, and delivered in February 2007.

G

Comment by George Lazarette posted on New K10D V1.10 Firmware at 19/01/2007 - 11:01

George Lazarette
Quote:
George,
Just a comment or two... if you take a look at all your *ist-D firmware files, and *ist-DS files they all end in "b".
It's not "b" for "beta" Matt
I didn't say it was b for beta. I just noted the difference in nomenclature, which suggests to me that Pentax were leaving open the option of making further changes.

Quote:
I suspect what they have done is release the .bin file to their reps and will produce the Windows and Mac installation files for the general public. Matt
You may well be right.

Quote:
Whether it's real or not though, I've downloaded the file, checked out the features, but haven't installed it. I'll wait until next week when it's released proper Matt
Moi aussi.

I find it interesting that they have now decided they can control the external flash from the camera. Why wasn't that there before? Since it is clearly only a software change there is no cost implication, and the technology was tried and tested in the *ist D.

I reckon that the complexities of the K10D were such that Pentax had great difficulty in getting it to market before Christmas. So some things were just ditched, to be picked up later.

All of which leads me to hope that there may be other enhancements to come. Although, I must say that I can't think of anything more that the camera needs. Perhaps the high ISO banding issue, though since I don't use high ISO I can't say it will make any difference to me.

G

Comment by George Lazarette posted on New K10D V1.10 Firmware at 19/01/2007 - 10:20

George Lazarette
The pixel-peepers on DepressingReview are getting their knickers in a twist worrying whether the update will fry their cameras. "This is madness", "expensive paperweight", etc.

However, it is worth noting that in the documentation the firmware file is described as: fwdc162.bin, whilst the file included in the unofficial zip is fwdc162b.bin. Note the "b".

This suggests to me that the official release of the firmware could be slightly different. In the documentation it is mentioned that the official release date is 23 January. This is not too far away, and rather than install twice I shall wait for the final version.

G

Comment by George Lazarette posted on New K10D V1.10 Firmware at 19/01/2007 - 09:28

George Lazarette
What about a swivelling hotshoe? Now there's a thought.

G

Comment by George Lazarette posted on Flash Gun for Pentax K10D required at 19/01/2007 - 20:14

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo