George Lazarette

Joined: 14th January 2004

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

George Lazarette
I think we can assume that Impotent Spider had nothing to do with this.

G

Comment by George Lazarette posted on Arachnophobes don't look now at 29/01/2007 - 21:45

George Lazarette
Nice one. This is where those long macros come in handy, so you don't have to get TOO close.

G

Comment by George Lazarette posted on Arachnophobes don't look now at 29/01/2007 - 21:42

George Lazarette
Thanks, Mongoose. I am enlightened.

G

Comment by George Lazarette posted on An actual (fairly minor) K10D gripe. at 29/01/2007 - 21:28

George Lazarette
Quote:

At least what I want to do is possible - thanks for drawing my attention to the need to hit Ok to save the orientation manually. But I still think the UI would be slicker if you could quickly rotate and zoom without having to save first.
I understand you now.

But how often do you really want to view an image on its side? I misunderstood what you were getting at because I couldn't imagine why you would want to correct the orientation of the picture (by switching rotation ON), and then decide to view it the "wrong" way after all.

For what sort of pictures is this ability to look at them on their side useful?

And is it really a fault, however minor, that the camera doesn't permit this without pressing the OK button?

G

Comment by George Lazarette posted on An actual (fairly minor) K10D gripe. at 29/01/2007 - 20:18

George Lazarette
Quote:
None of which has anything at all, AFAICS, to do with wanting to rotate the image manually on the LCD for viewing convenience after the fact.
I still utterly fail to get your point. My camera is set to allow image rotation. If I take the picture in portrait mode, the camera will display it in portrait mode. If I want to rotate it, I press the bottom arrow on the 4-way controller and the picture rotates.

What more do you want? Or don't you know that you can do this? Or am I thick? (Which is just as likely as the other options!)

G

Comment by George Lazarette posted on An actual (fairly minor) K10D gripe. at 29/01/2007 - 13:56

George Lazarette
I don't quite get your second point.

Pentax has given you the option to do rotation, or not. If you set the camera NOT to allow rotation, and it doesn't, what have you got to complain about?

Waiter: "Would you like soup, Sir?".
Customer: "No, thank you.".

Interval

Customer: "Oi, garcon, where's my soup?".

But perhaps I am missing something.

Incidentally, this is surely something you set and forget, and for most users, rotation would be the option of choice.

G

Comment by George Lazarette posted on An actual (fairly minor) K10D gripe. at 29/01/2007 - 12:07

George Lazarette
I've got a roll in my Spotmatic. Goodness knows how old that one is.

Google disgorged this:

http://www.rolandandcaroline.co.uk/oldfilmproc.html

G

Comment by George Lazarette posted on Who best to process oldish Concorde photos? at 29/01/2007 - 20:23

George Lazarette
I think it is punishing you for using your daughter's Christmas present.

I suggest you take it back to the shop, and ask for a replacement, plus one for yourself.

G

Comment by George Lazarette posted on Optio E10 - black screen at 29/01/2007 - 11:24

George Lazarette
Quote:
Hi there,

Im not technical when it comes to ISO but as you are probably aware this is to do with sensitivity to light. I beleive the difference between 100 and 200 is minimal but it all depends on the light shooting conditions i beleave.
Pete, since you clearly haven't mastered this subject, here is a brief introduction to apertures, shutter speed, and ISO.

The relationship between aperture and shutter speed and the way in which apertures are expressed, are just about the most basic concepts in photography.

It is pretty obvious that when you move from one shutter speed to the next, you are either halving or doubling the amount of time the shutter is open, and therefore halving or doubling the amount of light reaching the film/sensor. (Eg: 1/500 second is obviously twice as long as 1/1000 second).

It is less obvious that when you move from one aperture value to the next, you are doing the same thing. 1:2 is not obviously twice 1:2.8, but in photographic terms it is. 1:2 allows twice as much light to reach the film/sensor as 1:2.8 does.

What this means is that if you go up the aperture scale in one direction, say from 1:5.6 to 1:8, and down the shutter speed scale in the other, say from 1/250 to 1/125, the amount of light reaching the film/sensor is unchanged. Some old-fashioned cameras allowed you to lock the aperture and shutter speed together, so that as one increased, the other decreased, and correct exposure was maintained.

These stages (1:5.6 to 1:8, and 1/125 to 1/250) are called "stops". A stop is a doubling or halving of the light.

The same logic applies to sensitivity (or ISO). Each stage (100, 200, 400, etc) is exactly twice the sensitivity of the one before, and therefore each represents one stop.

So the difference between 100 and 200 is not "minimal but it all depends on the light shooting conditions i beleave", but one stop. No more, no less. It's exactly the same difference as between 1600 and 3200.

And with that one stop comes a reduction in quality. 200 is certainly pretty good, but 100 is better, and (unless you're after some special effect) you should always shoot at the lowest ISO that you can, without compromising DOF or blur.

To claim that "up to ISO 400 you would not notice anything" is to insult the person you are addressing.

Peter, your enthusiasm is commendable, but when you yourself admit that "Im not technical when it comes to ISO" and "i may be wrong so all you readers dont shout at me im only a novice ", then perhaps here is an opportunity for you to keep quiet for once and brush up on your photographic theory (not to mention spelling and grammar).

G

Comment by George Lazarette posted on K10D 100 ISO vs K100D 200 ISO at 28/01/2007 - 22:42

George Lazarette
Try the manual:

http://www.pentaximaging.com/files/manual/Web_AF360FGZ_REV2_120903.pdf

Basically, M is for master. This is where you have a gun on the camera which you want to do two things:

1 Flash
2 Control a second gun (which will be set to S for slave)

C is for control. This is where you want the gun on the camera simply to control the second gun, but not to flash itself. It will emit a burst of flashes to trigger the second gun, but will not itself fire when the shutter is open.

G

Comment by George Lazarette posted on K10D & AF360GZ M,C,S modes ? at 26/01/2007 - 18:10

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo