George Lazarette

Joined: 14th January 2004

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

George Lazarette
I don't have this lens, but I used to have the excellent 24-90 zoom. It is normal for that lens to exhibit alarming wobbliness and yet the pictures were always fine.

Perhaps both had the same lens designer.

G

Comment by George Lazarette posted on DA 70mm f2.4 - play in barrel at 03/08/2008 - 14:44

George Lazarette
awarner wrote:
George Lazarette wrote:

Pots and kettles.

G
And now that's out of the way shall we forget the rash comments and look forward to making this site a community where all people feel welcome
Seems OK to me. I have wiped your posts from my memory, and look forward to some carefully-considered and polite contributions from you in future.

And when you have a few dozen posts to your credit, please feel free to make suggestions about how to run this site.

G

Comment by George Lazarette posted on Auto focus making people lazy? at 01/08/2008 - 23:51

George Lazarette
awarner wrote:
George
Like they say if people think you are an idiot keep your mouth shut, otherwise open it and remove all doubt
Pots and kettles.

G

Comment by George Lazarette posted on Auto focus making people lazy? at 30/07/2008 - 22:33

George Lazarette
Duroo72,

You can't be paying much attention to this forum if you have missed Chris's quite splendid shot from Farnborough.

It has received more plaudits than any other picture I have seen posted here, and I have been a member for a while. It is beautifully composed and exposed, full of drama, and the light is wonderful. It's a superb shot in every way. And it's not over-sharpened at all, let alone massively.

To save yourself embarassment, I suggest before you issue any more challenges you take a look around the forum.

G

Comment by George Lazarette posted on Auto focus making people lazy? at 30/07/2008 - 22:30

George Lazarette
ChrisA wrote:
George Lazarette wrote:


That's all well and good. Now kindly explain how to install firmware version 1.10 onto a K10D which has current firmware.
Just out of interest, other than getting into Debug mode without using an undocumented Russian program where all the buttons are in Russian, why would you want to regress the firmware?
I wouldn't, except briefly to adjust the focus setting. As Matt says, it's the only way to do it. Once done, it's back to 1.30.

G

Comment by George Lazarette posted on focus adjustment k10d at 29/07/2008 - 23:29

George Lazarette
awarner wrote:
Unlocker wrote:

Quote:
One reason and probably the main one in getting a DSLR is I want to control what I am focusing on rather than let technology take over.
Sorry, just don't understand the point. 'I want a fully automated camera to be in manual control' makes no sense to me at all. If you're concerned about technology taking over why buy a DSLR? Just use an old manual film camera, then you are 100% in control. The technology will always be there, but there is always an often forgotten 'off' button!
The whole reason for buying a DSLR is running costs, simple as that.


None of your arguments relate to DSLRs. They relate to digital cameras generally. And you appear to have a very limited idea of what digital offers.

First, if it's just runnung costs you are concerned about, then any digital camera will lower your shooting costs - it doesn't have to be a DSLR.

Second, digital gives you much greater control over your images generally. You decide on colour balance, crop, contrast, saturation, etc., etc..

Third, digital is immensely more convenient. You have pictures instantly, and you have instant feedback. You can store and view your images on computer,; email them across the world; place them on the web; print them; as you please.

And auto-focus has nothing to do with digital specifically - the benefits apply equally to film. For some people, whose eyes are not what they were, AF is essential. It's also very useful for fast-moving situations, like photographing children. But MF is always available when it is appropriate to use it.

To say it is laziness to use AF is to exhibit another sort of laziness - mental laziness. The same sort of laziness that leads to saying that cost is the "sole" reason for using digital.

G

Comment by George Lazarette posted on Auto focus making people lazy? at 29/07/2008 - 23:25

George Lazarette
Malo1961 wrote:
George Lazarette wrote:


That's all well and good. Now kindly explain how to install firmware version 1.10 onto a K10D which has current firmware.

G
It's available here
Use at your own risk, obviously
Martin.
Thanks. Excellent link.

G

Comment by George Lazarette posted on focus adjustment k10d at 28/07/2008 - 23:09

George Lazarette
I saw the first one, without reading the caption, and thought: "Well, there's an example of HDR that I could live with. Not bad at all."

Then the penny dropped.

G

Comment by George Lazarette posted on HDR - Photomatix at 28/07/2008 - 22:48

George Lazarette
mikew wrote:
Hmm well I found this some time ago:


I have big news!

If your K10D have problem with focus, you can adjust it yourself.

Someone in Korea figured it out himself.

He is not a employee of Pentax or related company.

He just found out by trial-and-error with key-set.

Of course, You yourself is responsible for doing something scribed below.

Here's How-to-adjust-focus.

1. Your K10D' firmware version must be 1.10.

2. Test shot for focus trouble.

3. Turn the camera OFF.
While pressing [PLAY]+[OK], Turn the camera ON.
You can see firmware version on LCD screen.

4. Firmware version is appeared,
then press [Fn]->[Fn]->[INFO]->[MENU] within 5 seconds.
You get service menu!!!

5. by pressing [right key]
,Make DEBUG MODE to DEBUG MODE .
then press [OK].
(save and LCD will be black out)

6. Press [MENU] and go to SETUP tab.
then, Press [Up key], you can see TEST MODE.

7. Select AF TEST menu. now you have AF correction menu.
If you have Front-focusing, reduce the value.
If you have back-focusing, increase the value.
after adjust some value, press [OK] and quit out of setup menu.

8. TEST for focus, find out that focus is correct.
(repeat this from 6 for correct focus.)
9. Go to service menu(step 3,4).
Make DEBUG MODE to DEBUG MODE .
then press [OK].(save and LCD black out)

10. Go out and enjoy nice photos!!!


AGAIN, You yourself is responsible for any damage or trouble by doing this process!!!!!!!!!!!!!

--

I too can only say use it at your peril!

Mike
That's all well and good. Now kindly explain how to install firmware version 1.10 onto a K10D which has current firmware.

G

Comment by George Lazarette posted on focus adjustment k10d at 28/07/2008 - 22:41

George Lazarette
If a new 50mm sells for £160.00, then £100 for a used one in excellent condition is OK.

It will be much better made than Copiercam lenses selling for £80.00. And optically superior. And able to work with better bodies.

A pretty good deal all round, in fact.

G

Comment by George Lazarette posted on Ebay prices. at 27/07/2008 - 22:14

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo