All Forum Comments
Comment by Frogherder posted on Vivitar lens at 12/06/2013 - 10:48
I realise that rust isn't generally a photographers nightmare but I would have thought that an enclosed, warm environment with bags of dessicant would be the ideal solution.
regards
Bernard
Comment by Frogherder posted on CAMERA & LENS STORAGE at 10/06/2013 - 14:39
regards
Bernard
Comment by Frogherder posted on Vivitar lens at 10/06/2013 - 14:10

K10D in manual mode ISO 200; f2.0 - green button came up with 1/1500.
Original was a tad dark so lightened just a bit in PS7
regards
Bernard
Comment by Frogherder posted on Vivitar lens at 10/06/2013 - 13:19
Any way I used Algi's cold cream remedy and I now have a crystal clear lens to play with, see :-

.
The dust is on the outside of the lens (I know Ishould have cleaned that off prior to snapping the lens)
regards
Bernard
Comment by Frogherder posted on Vivitar lens at 09/06/2013 - 16:44
regards
Bernard
Comment by Frogherder posted on Long range remote at 09/06/2013 - 16:35
So I think the next tack is to get her stripped and rubbed over with cold cream
I'll keep you posted on progress
regards
Bernard
Comment by Frogherder posted on Vivitar lens at 08/06/2013 - 23:50
Got to admit I've got a huge collection of duff pics though. And I'd usually forgotten why I took them by the time I got the prints.
I recall that 'Kodak' was apparently named after the sound a camera made.
I would have thought ker-ching would have been more appropriate.
regards
Bernard
Comment by Frogherder posted on Exposure compensation? at 30/05/2013 - 19:46
Bernard.... You have middle-grey hands which planet
you from
Seriously though, I managed quite well doing that for many years. But I suppose the latitude in negative stock allowed for those kind of errors.
regards
Bernard
Comment by Frogherder posted on Exposure compensation? at 30/05/2013 - 19:22
regards
Bernard
Comment by Frogherder posted on Exposure compensation? at 30/05/2013 - 17:25


I first turned a wooden mandrel onto which the loose ring would slide firmly.
A stepped shoulder stopped the ring at the required distance.
I then cut around with a fine hacksaw blade (the end of the wood preventing too much straying from the line)
Finally finished with a fine flat needle file (again using the end of the mandrell as a guide)
A quick bit of fettling on all cut edges to remove burrs etc then washed off any debris with plain water.
Probably a bit long winded to some but the result is in my 2nd pic.
I then dabbed some black acrylic paint over the cut edge (pic #2 taken before this stage)
regards
Bernard