All Forum Comments
Comment by Blues_Breaker posted on Will using acetone to clean a lens affect SMC coatings? at 12/06/2012 - 21:17
I haven't taken any real test photos with the lens yet but even if they were unaffected having that kind of mark on the lens would drive me nuts!
Looks like i'll try the isopropyl first to see if that will shift it, thanks to all of those who suggested it.
I have just found a bottle of cleaning fluid in a "Pentax Camera Maintenance Kit II" that came with one of my ME Supers - i'll try using it on one of my lenses with fungus to see if its ok - it must be 30 years old May as well try the vodka method as well as I have a plentiful supply of that
Thanks to petrochemist for the expert knowledge as well.
Cheers
Keir.
EDIT - On closer inspection of the lens I've just found two small fungus marks on the rear element Does anyone know if the rear element can be removed on it's own to access the fungus? I'll leave it in the window just now as I've heard UV light kills the fungus - I also blast it with a UV torch later on. I would consider getting the lens professionally cleaned but it all depends on how expensive it would be.
Comment by Blues_Breaker posted on Will using acetone to clean a lens affect SMC coatings? at 02/06/2012 - 07:07
Recently bought a job lot of cameras off of eBay for the huge sum of £15 plus postage(£20). I don't mean to gloat but I can't understand how I managed to get it so cheaply as it had been viewed 350 times and included the relatively rare FA 50mm f1.7 lens!
Anyway the stuff came in today and the lens is working fine and free from fungus and scratches but there is a small blob of what appears to be superglue hardened onto the front element near the edge. - I can't really complain though and am still over the moon with the deal i got!
I googled a bit and found that acetone can remove superglue from glass easily but melts plastics that it comes into contact with. There seemed to be a divide in opinion whether acetone would affect lens coating as well.
Could anyone with more knowledge on lens cleaning tell me if it's worth risking it?
Cheers,
Keir
Comment by Blues_Breaker posted on Will using acetone to clean a lens affect SMC coatings? at 30/05/2012 - 23:14
link
Unless the price drops a reasonable amount after launch I think I'd just pay a little extra and get the FA f1.4.
Cheers,
Keir.
EDIT - Found it here for £249 as a preorder link
Comment by Blues_Breaker posted on smc PENTAX DA 50mm f1.8 at 24/05/2012 - 17:04
I don't have a K5 but I'm pretty sure you can use the remote to operate Bulb mode for long exposures. If I remember correctly you push the remote button once to open the shutter and then again to close it.
Regards,
Keir
Comment by Blues_Breaker posted on hullo from York at 13/05/2012 - 15:07
To answer your question about a cable release - the K5 is compatible with a remote control to fire the shutter which is more convenient than a cable release IMO.
I bought a compatible remote for £1.25 delivered from China via eBay! It has worked flawlessly for me but you can buy a genuine Pentax version for around £20 if you have concerns about it's quality.
Regards,
Keir.
Comment by Blues_Breaker posted on hullo from York at 12/05/2012 - 23:39
I'm almost certain it's not fungus now after doing some more research - it looks the same as the photo of the lens in the following link. In the thread they think it could be oil on the lens or cement that somehow liquefied and then hardened on the element.
link
As for the cleaning marks I'm pretty sure they will disappear once I clean it properly - stopped as soon as I noticed the weird pattern and posted on here
If anyone has any advice or tips on how to remove the front element safely I'd be really grateful.
Cheers,
Keir
Comment by Blues_Breaker posted on What is this? - unusual marks on Pentax-M 80-200 front element at 29/04/2012 - 13:51
Was cleaning my Pentax-M 80-200 for the first time today and noticed strange lines on the edge of the front element that go around the entire circumference.
link
I don't think it's fungus as I've got a couple of lenses with fungus present and this doesn't look the same. That being said I am relatively new to photography so I could be wrong!
Can anyone tell me if this is normal on lens coatings or a problem with the lens?
Cheers,
Keir.
Comment by Blues_Breaker posted on What is this? - unusual marks on Pentax-M 80-200 front element at 29/04/2012 - 11:31
I should actually change the thread title as I turned 20 a couple of days ago!
Keir
Comment by Blues_Breaker posted on 19 Year Old Pentax User! at 19/04/2012 - 22:50
Looks like I'll be busy taking photos of gear to put on the classifieds in the meantime!
Keir.
Comment by Blues_Breaker posted on 19 Year Old Pentax User! at 19/04/2012 - 20:39


The lens is finally free from super glue and it turns out the fungus must have been on the outside of the rear element as it cleaned off
Used 'Loctite Detach' glue remover to get rid of the glue. It contains Heterocyclic Keytones and did not harm the coatings at all. I put superglue on an old fungus infected lens beforehand to make sure it was safe though!
Thanks again to all who contributed,
Keir.