Blues_Breaker

Joined: 21st March 2012

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

Blues_Breaker
Thanks for all of the responses!

It looks like I'll have to upgrade after all - I had feared this might be the case.

Think I'll have to wait until the new body is released and see if there's any K5 IIs going cheap as I really can't afford to buy a new one!

Edit - forgot to ask - does anyone think the K30 AF system would be able to cope in a nightclub situation?


Thanks again,

Keir.

Comment by Blues_Breaker posted on K5 Lowlight AF good enough for Nightclub Photography? at 29/07/2013 - 17:29

Blues_Breaker
Hello,

As the title says I'm wondering if anyone has used the original K5 for nightclub photography and found the AF to be acceptable.

I'm currently a student and will be looking to try and get occasional work taking photos in nightclubs. Last term I was living in student halls and so had plenty of opportunities to practice taking photographs of parties etc.

I had no real problems focusing, but as most of these parties were held in reasonably lit flats, that was to be expected.

On some occasions the lights were turned off and I had to switch to live view to use the green AF assist light of the K5 body to find focus - the one on my flash couldn't cope. It was almost pitch black however.

I have heard very good things about the K5 II low light AF but am reluctant to upgrade if my K5 could cope with focusing in an average nightclub.


Cheers,

Keir.

Comment by Blues_Breaker posted on K5 Lowlight AF good enough for Nightclub Photography? at 26/07/2013 - 22:18

Blues_Breaker
PM sent.

Comment by Blues_Breaker posted on Wanted: Camera + Tubes at 24/09/2012 - 17:19

Blues_Breaker
SOLD.

Comment by Blues_Breaker posted on For Sale: Jessop MC 2x Pz/AF Teleconverter - as new at 24/07/2012 - 22:18

Blues_Breaker
Provisionally sold.

Comment by Blues_Breaker posted on For Sale: Jessop MC 2x Pz/AF Teleconverter - as new at 23/07/2012 - 01:26

Blues_Breaker
Selling my Jessop AF teleconverter which has electrical contacts along with a screwdrive for autofocus.

It appears to have contacts for SDM/HSM lenses but as I don't have an SDM/HSM lens I cannot guarantee that it will autofocus with these lenses. Any buyer should assume that SDM/HSM focussing will NOT work to avoid disappointment - unless someone can confirm that this model is compatible with these lenses?

Anyway, it is in as new condition with original caps, case and box. As you will see from the photos below the box has some wear to its edges.

Comment Image

Comment Image

Comment Image


Price - £65 plus P+P

UK and Paypal only

Cheers,

Keir.

Comment by Blues_Breaker posted on For Sale: Jessop MC 2x Pz/AF Teleconverter - as new at 22/07/2012 - 22:15

Blues_Breaker
SOLD.

Comment by Blues_Breaker posted on Boxed Jessops PKA/AF Extension tubes at 25/06/2012 - 19:24

Blues_Breaker
PM Replied.

Comment by Blues_Breaker posted on Boxed Jessops PKA/AF Extension tubes at 25/06/2012 - 18:43

Blues_Breaker
Selling my set of Jessops extension tubes that have the electrical contacts for automatic exposure.

They are in very good condition with some minimal wear to the edges of the mounts as you will see in the photos below. The original box is included along with the albeit tatty instruction sheet.

As many of you will probably know to have the aperture value appear in the viewfinder with these tubes the 7th contact on the camera has to be shorted. This can be done by either placing a piece of kitchen foil between the extension tubes and contact or scraping away a small section of paint in the corresponding place on each tube. I chose to use the foil method but the paint can be scraped off easily by the buyer.

More info here: link

Comment Image

Comment Image

Comment Image


Price - £75 plus P+P

UK and Paypal only

Cheers,

Keir.

Comment by Blues_Breaker posted on Boxed Jessops PKA/AF Extension tubes at 24/06/2012 - 16:49

Blues_Breaker
Cuchulainn - I used cotton buds to apply the glue remover (very sparingly) and also to remove it. Managed to do it without getting anything near the plastics on the lens so it should be fine.

Thanks again petrochemist for more expert information

Cheers,

Keir.

Comment by Blues_Breaker posted on Will using acetone to clean a lens affect SMC coatings? at 13/06/2012 - 19:40

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo