bforbes

Joined: 31st October 2008

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

bforbes
greyhoundman wrote:
Remove the pin first. Otherwise it will get caught in the AF hole. It is then a matter of nerve to twist back off. Here is the pin that needs to be removed. I just use a dremel.
[IMG]http://i54.photobucket.com/albums/g109/greyhoundman/KR-PIN.jpg[/IMG]
you can take out the pin by removing the four screws shown above and pull the pin out with a pair of tweezers

Comment by bforbes posted on kr mount at 05/02/2009 - 18:38

bforbes
Hi and Welcome to the forum. There are some very clued up people in the forum but not me!! If your stuck just ask

Comment by bforbes posted on New to forum and DSLR at 05/02/2009 - 10:44

bforbes
If you are looking for Sigma be quick. A friend of mine hesitated yesterday over a 150-500 for his Canon and the price went up over £100.

Comment by bforbes posted on Suggestions plz for 500mm lens at 04/02/2009 - 19:21

bforbes
shim wrote:


I don't know where your getting the 3mm tolerance from.....
shim
I’m asking the question is being able to focus to +-3mm over 450mm i.e. a tolerance of 0.66%, acceptable or not? I take your argument that it's not.

The other point I was making is that it's not stated anywhere, that I can find, the manufactures expectation for there products in terms of focusing accuracy.

A lens could be described as having pin sharp performance or crisp but it’s of little use if, as you say, it can focus 10mm front to back of the target, but still be within the manufacturers limits.

Comment by bforbes posted on Pentax 100mm Macro at 04/02/2009 - 18:45

bforbes
Very artistic and well worth the effort

Comment by bforbes posted on Was a bit bored this afternoon so .... Water at 04/02/2009 - 00:20

bforbes
in relation to front/back focus has anyone ever asked the manufactures what tolerance they work to when assembling the cameras?
shim wrote:
Just had a look at this site and the depth of field for a 50mm lens at f/2.8 and 1.5ft (450mm) distance is only +-3mm. I've repeated the test with the 100mm Macro at double the distance and the results are the same..... Back focusing on manual and AF by 5-10mm which means the K10D is about as much use as a chocolate fireguard. I think I'll start looking for a Canon

shim
3mm over 450mm is a tolerance of 0.66% would seem very good to me

Comment by bforbes posted on Pentax 100mm Macro at 03/02/2009 - 19:34

bforbes
would the 100mm macro lens also double as a 100mm telephoto or does the construction to suit short distance focus mean this is not practical

Comment by bforbes posted on Pentax 100mm Macro at 03/02/2009 - 10:22

bforbes
Daniel Bridge wrote:
shim wrote:
...or Limit, in which case it restricts it's search to the Macro range max 0.6m.
...or 0.6m to infinity, depending where the focus is before you switch the limiter in.

Dan
ok got that. so what is the disadvantage of the Pentax 100mm f/2.8 Macro SMC P-D FA not having it.

Comment by bforbes posted on Pentax 100mm Macro at 02/02/2009 - 23:35

bforbes
in this review's verdict they talk about the lack of a "focus limiter" how is that different to a focus lock.

http://www.ephotozine.com/article/Pentax-SMC-100mm-f28-D-FA-Macro

Comment by bforbes posted on Pentax 100mm Macro at 02/02/2009 - 20:41

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo