Wireless remote control compatible with Pentax K3.3

Daronl
Posted 27/04/2025 - 12:54 Link
I would welcome any experience regarding remote control for the K33 as it seems the only one that is being offered now is a sealed unit no facility to change the battery or charge it which has to be “binned“ when the battery runs out.

If anyone has some experience with any form of remote Control controller I will be most grateful for any advice.

Traditionally, remote control controllers or compatible with bodies from “way back“ up to later Camera motors but it seems the K3 .3 is not compatible with those older Pentax remote controls.

Any help would be much appreciated.

Ps; are there any users of the latest Remote Control O-RC1 waterproof who could verify how many shutter activations this unit can deliver before the sealed battery is “shot”
Daronl
Edited by Daronl: 27/04/2025 - 13:02
pschlute
Posted 27/04/2025 - 13:54 Link
I cannot answer how many activations you get with it as I have not counted !

I would say mine has had light to medium use. I bought it 6 years ago...still going strong.
Lubbyman
Posted 27/04/2025 - 16:00 Link
Here's how to replace the battery in the O-RC1 link . Thanks to cardiffgareth (hi, Gareth, if you're reading this).

Steve
Spad
Posted 27/04/2025 - 18:24 Link
I highly recommend one of THESE. This is for a Canon but it is the same cable for Pentax.

Much more capable and it will give you more options to shoot longer exposure.
Edited by Spad: 27/04/2025 - 18:28
Daronl
Posted 28/04/2025 - 02:53 Link
Thanks for your info here looks like a great option; just one thing ; are you using on a K3.3
Daronl
womble
Posted 28/04/2025 - 06:48 Link
I have had a Pentax remote for 15+ years (I bought it with for my K10D) and it is still going on its original battery. I also have an app on my Huawei phone (called "smart remote", it came preinstalled) which I use most of the time now (I usually know where my phone is, I often mislay my remote!). The app is programmed to trigger both my Pentax and my wife's Nikon.

I also have a cabled release which I prefer when doing a lot of copy-stand work. I can loop the cable around the stand so the button is dangling somewhere obvious. I find the small remote gets lost under the other stuff on the table.

Dunno if that helps! K.
Kris Lockyear
It is an illusion that photos are made with the camera… they are made with the eye, heart and head. Henri Cartier-Bresson
Lots of film bodies, a couple of digital ones, too many lenses (mainly older glass) and a Horseman LE 5x4.
Spad
Posted 28/04/2025 - 10:26 Link
Daronl wrote:
Thanks for your info here looks like a great option; just one thing ; are you using on a K3.3
It will work on a K3iii... i use one on a K3.

The K3iii has a cable release port.

Comment Image

Add Comment

To leave a comment - Log in to Pentax User or create a new account.



Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo