Shutter stays open

Posted 08/05/2009 - 00:18 Link
When I came to use my *istdl after a long period of disuse, the shutter stays open when taking a photo (as if its in "bulb" mode) and only returns when the camera is switched to "off".

Needless to say, there is no image on the SD card.

Any suggestions?
johnriley
Posted 08/05/2009 - 00:27 Link
Take out the batteries, leave for a few minutes and then re-install fresh batteries. Then try again.

If this doesn't work, then it looks as if a fault has developed.
Best regards, John
Anvh
Posted 08/05/2009 - 02:27 Link
Putting fresh frimware on it might also help, if that isn't the case the fault is probable in the hardware.
The system to move the mirror is very precise so I won't try to fixed it yourself but simply send it away to get fixed, don't know if it's worth it though since you probable need to pay for it.
Stefan
Comment Image

K10D, K5
DA* 16-50, DA* 50-135, D-FA 100 Macro, DA 40 Ltd, DA 18-55
AF-540FGZ
Posted 08/05/2009 - 11:06 Link
How do I instal new firmware?
Posted 08/05/2009 - 12:06 Link
I have now loaded Firmware version 1.03 (was 1.00) but it hasn't made any difference. Am I missing some fine point of the setup?
brownargus
Posted 08/05/2009 - 12:19 Link
merlin5786 wrote:
When I came to use my *istdl after a long period of disuse, the shutter stays open when taking a photo (as if its in "bulb" mode) and only returns when the camera is switched to "off".

Needless to say, there is no image on the SD card.

Any suggestions?
I had a similar thing with a friend's *istD. When I reinstalled the firmware it cured it but it happened again after a time. Purely by chance, I suggested taking a flash shot and the shutter worked after that. Just a possibility!

John
Pentax K7, Pentax DFA 100 macro, Sigma 17-70 macro, Tamron 70-200 Di LD zoom macro, Vivitar 28 f2.8 CF, Tamron 500 mirror lens, Pentax 360FGZ flash, Panasonic FZ28
Anvh
Posted 08/05/2009 - 12:36 Link
I've a K10D and never had an istD but with the K10D you get to see the firmware version when you press and hold the meneu button and turn the camera on you see the firmware version.

If you've the new firmware and you still got the problem your camera is simply broken and need to be fixed. The reinstalling of the firmware and what John Riley said are the only things you can do for yourself the rest needs to be taken care of by a specialist.
Stefan
Comment Image

K10D, K5
DA* 16-50, DA* 50-135, D-FA 100 Macro, DA 40 Ltd, DA 18-55
AF-540FGZ
grahamwalton
Posted 08/05/2009 - 13:20 Link
If you haven't alreadt tried it, I would fire the shutter in every mode and see if that cures it. IE. P TV AV M and especially B. Also try it at a high ISO.
Friendly Regards
Graham

Add Comment

To leave a comment - Log in to Pentax User or create a new account.



Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo