SDM Lenses
Posted 03/10/2009 - 12:09
Link
Greytop wrote:
I like my DA* SDM lenses, OK I agree with Richard they are not 'sports cars' but more like 'warmed up saloons' but mostly they get the job done in a silent manner
Agreed Huw, But if everybody just kept quite about it and just swept it all under the carpet, Pentax will not bother to get their “finger out” and do something about it, it is showing right through the company from customer services to development, If the desire to be up with the “ big boys” is not there then there is only one ending for them, and that will be a very sad day.I like my DA* SDM lenses, OK I agree with Richard they are not 'sports cars' but more like 'warmed up saloons' but mostly they get the job done in a silent manner
So Pentax bosses if you are looking at this thread get it sorted!
Posted 03/10/2009 - 14:26
Link
But continually whingeing about things won't help Pentax sell more product, which it needs to do if it is to expand.
I only have one SDM lens, and it works very well. People should worry more about their technique if their aim is to produce good photos, and if their aim is something else they've got their priorities mixed up.
G
I only have one SDM lens, and it works very well. People should worry more about their technique if their aim is to produce good photos, and if their aim is something else they've got their priorities mixed up.
G
Keywords: Charming, polite, and generally agreeable.
Posted 03/10/2009 - 14:31
Link
George you're the one whining now
It's not about that we need faster AF it's just that it has potential to go faster.
Another thought, what's the life time of an USM motor?
It's a motor so it will wear out, right?
It's not about that we need faster AF it's just that it has potential to go faster.
Another thought, what's the life time of an USM motor?
It's a motor so it will wear out, right?
Posted 03/10/2009 - 14:43
Link
George Lazarette wrote:
But continually whingeing about things won't help Pentax sell more product, which it needs to do if it is to expand.
I only have one SDM lens, and it works very well. People should worry more about their technique if their aim is to produce good photos, and if their aim is something else they've got their priorities mixed up.
G
No body is whinging George (apart from you), but if you want to stick your head in the sand and say that everything is ok, that’s fine by me.But continually whingeing about things won't help Pentax sell more product, which it needs to do if it is to expand.
I only have one SDM lens, and it works very well. People should worry more about their technique if their aim is to produce good photos, and if their aim is something else they've got their priorities mixed up.
G
Pentax have got to be told what we as consumers want for our hard earned money, or we will not buy the goods they have to offer.
Posted 03/10/2009 - 14:44
Link
Anvh wrote:
George you're the one whining now
It's not about that we need faster AF it's just that it has potential to go faster.
Another thought, what's the life time of an USM motor?
It's a motor so it will wear out, right?
There is a wear factor, in this case it is likely to be the bearings. I may be wrong but at these small sizes, the bearings are probably bushes and not ball races.George you're the one whining now
It's not about that we need faster AF it's just that it has potential to go faster.
Another thought, what's the life time of an USM motor?
It's a motor so it will wear out, right?
That said, the life span of these motors are very high. I expect other "fits' inside the lens to be wearing just as much by the time that the motor becomes an issue.
It is well known in other circles that ex pro Nikon lenses are not a good buy as their motors are "thrashed" after several years use.
You would probably get index finger joint failure before the motor gives up?
Regards
Too far from a shore.
Posted 03/10/2009 - 16:23
Link
Anvh wrote:
George you're the one whining now
I said whingeing, not whining. There is a difference. George you're the one whining now
G
Keywords: Charming, polite, and generally agreeable.
Posted 03/10/2009 - 16:27
Link
loskeran wrote:
No body is whinging George (apart from you), but if you want to stick your head in the sand and say that everything is ok, that’s fine by me.
Pentax have got to be told what we as consumers want for our hard earned money, or we will not buy the goods they have to offer.
I wasn't meaning to single you out, Loskeran. No body is whinging George (apart from you), but if you want to stick your head in the sand and say that everything is ok, that’s fine by me.
Pentax have got to be told what we as consumers want for our hard earned money, or we will not buy the goods they have to offer.
But at the same time I'm sure Pentax have a pretty good idea of what is needed. They have a large Japanese user-base, who are very technically savvy, and to whom they will listen hardest. I doubt if they monitor this forum.
But I could be wrong.
G
Keywords: Charming, polite, and generally agreeable.
Posted 03/10/2009 - 16:31
Link
Apologies for the lack of research before asking this...
... but is it possible to force an SDM lens that can use the body's screw drive on a non-SDM-enabled body, to use the screw drive on an SDM-enabled body?
... but is it possible to force an SDM lens that can use the body's screw drive on a non-SDM-enabled body, to use the screw drive on an SDM-enabled body?
.
Pentax K-3, DA18-135, DA35 F2.4, DA17-70, DA55-300, FA28-200, A50 F1.7, A100 F4 Macro, A400 F5.6, Sigma 10-20 EXDC, 50-500 F4.5-6.3 APO DG OS Samsung flash SEF-54PZF(x2)
.
Pentax K-3, DA18-135, DA35 F2.4, DA17-70, DA55-300, FA28-200, A50 F1.7, A100 F4 Macro, A400 F5.6, Sigma 10-20 EXDC, 50-500 F4.5-6.3 APO DG OS Samsung flash SEF-54PZF(x2)
.
Posted 03/10/2009 - 17:31
Link
Quote:
I doubt if they monitor this forum.
But I could be wrong.
I just hope they are George, Because I personally don't want a camera that is all the colours of the rainbow, I want a “system” that works first class and is good value for money.I doubt if they monitor this forum.
But I could be wrong.
Maybe I am from another time, an old fogy that has past his “sell by” date but I am still after that illusive shot, and want the best possible kit to do it with.
Posted 03/10/2009 - 17:42
Link
The motor used in the Pentax SDM lenses does use an supersonic drive system, it's just that it's a small supersonic "micro" motor similar to those used by Canon in some of their their USM lenses that don't feature the larger ring design which is much larger, much faster and more expensive. Stefans post showing the different Canon assemblies is relevant as the smaller USM motors are not as fast as the large ring type.
Please don't confuse the word supersonic or ultrasonic with fast, it's the method used to energise the motor as opposed to a DC micro-motor. An explanation can be found here:
link
This is a picture of the Pentax supersonic motor

This is a picture Nikons SWM motor assembly

This is a Canon assembly which is very similar to the Nikon.

This is a (somewhat rough) diagram of the Pentax SDM/screw drive system.

I believe that the (in reality) very few SDM failures, mainly with the early lenses, are due to alignment errors that may have happened during transit from the factory to the user (we've all experienced the kind of handling that happens in transit!). I suspect that the tolerances are very tight and that even a very slight misalignment can cause failures over time due to excessive strain on either the motor or gearing mechanism.
From what I've heard from various trade sources, I believe that the number of Pentax failures is similar, if not less than, the percentage that occurs with other makes, especially with the newer production units.
The increased complexity of modern AF lenses (plus the ability to pixel peep!) has put ever increasing strains tightening tolerances and on product reliability.
As far as I'm concerned, Pentax products are as good as the best out there. Notwithstanding that, I know for a fact that long term reliability of modern electromechanical products is somewhat less than it was a few years back due to the introduction of non lead based solders and similar restrictions, it's no surprise that military and medical electronics are exempt from the RoHS regulations.
Please don't confuse the word supersonic or ultrasonic with fast, it's the method used to energise the motor as opposed to a DC micro-motor. An explanation can be found here:
link
This is a picture of the Pentax supersonic motor

This is a picture Nikons SWM motor assembly

This is a Canon assembly which is very similar to the Nikon.

This is a (somewhat rough) diagram of the Pentax SDM/screw drive system.

I believe that the (in reality) very few SDM failures, mainly with the early lenses, are due to alignment errors that may have happened during transit from the factory to the user (we've all experienced the kind of handling that happens in transit!). I suspect that the tolerances are very tight and that even a very slight misalignment can cause failures over time due to excessive strain on either the motor or gearing mechanism.
From what I've heard from various trade sources, I believe that the number of Pentax failures is similar, if not less than, the percentage that occurs with other makes, especially with the newer production units.
The increased complexity of modern AF lenses (plus the ability to pixel peep!) has put ever increasing strains tightening tolerances and on product reliability.
As far as I'm concerned, Pentax products are as good as the best out there. Notwithstanding that, I know for a fact that long term reliability of modern electromechanical products is somewhat less than it was a few years back due to the introduction of non lead based solders and similar restrictions, it's no surprise that military and medical electronics are exempt from the RoHS regulations.
Posted 03/10/2009 - 18:00
Link
May I add, the Canon/Nikon "Ring" motors are mainly used on the larger lenses, the same as Sigma’s.
Where the Pentax? motor struggles I feel is all the weather sealing friction, surly they could have fitted a slightly more powerful one, as I’m sure they don’t make the motor assembly them selves.
As for the cost of a better motor, the very small amount would be well worth it.
Where the Pentax? motor struggles I feel is all the weather sealing friction, surly they could have fitted a slightly more powerful one, as I’m sure they don’t make the motor assembly them selves.
As for the cost of a better motor, the very small amount would be well worth it.
Posted 03/10/2009 - 18:45
Link
loskeran wrote:
Maybe I am from another time, an old fogy that has past his “sell by” date but I am still after that illusive shot, and want the best possible kit to do it with.
Whether YOU want a choice of colour scheme is not really relevant, so long as plenty of other people DO, and therefore choose Pentax over Canikony.Quote:
I doubt if they monitor this forum.
But I could be wrong.
I just hope they are George, Because I personally don't want a camera that is all the colours of the rainbow, I want a “system” that works first class and is good value for money.I doubt if they monitor this forum.
But I could be wrong.
Maybe I am from another time, an old fogy that has past his “sell by” date but I am still after that illusive shot, and want the best possible kit to do it with.
But we all want something that works properly, at a decent price, so no disagreement there.
G
Keywords: Charming, polite, and generally agreeable.
Posted 03/10/2009 - 18:48
Link
loskeran wrote:
Where the Pentax? motor struggles I feel is all the weather sealing friction, surly they could have fitted a slightly more powerful one, as I’m sure they don’t make the motor assembly them selves.
As for the cost of a better motor, the very small amount would be well worth it.
I can't speak for the other lenses, but on the 16-50, everything that moves is inside. So I don't think the weather-sealing should make any difference.Where the Pentax? motor struggles I feel is all the weather sealing friction, surly they could have fitted a slightly more powerful one, as I’m sure they don’t make the motor assembly them selves.
As for the cost of a better motor, the very small amount would be well worth it.
But I might be wrong!
G
Keywords: Charming, polite, and generally agreeable.
Posted 03/10/2009 - 18:52
Link
Do those Canon and Nikon lenses that use "ring" motors offer the ability to focus with non-USM enabled bodies?
G
G
Keywords: Charming, polite, and generally agreeable.
Add Comment
To leave a comment - Log in to Pentax User or create a new account.



2038 posts
17 years
Berkshire,
England.
flickr