Rubber Comin away on K20D

CraigF1969
Posted 28/04/2009 - 12:08 Link
Got my K20D on saturday and was putting it in my bag this morning and noticed the rubber on the back (right hand side next to memory card slot) is coming away.
Is this a common fault?
Its not bad at the moment but i dont think its going to get any better.
Approx half a thumb width (quarter inch), it looks as though it wasnt sealed properly during manufacture.
Also looking at the Place where i bought its website it seems im liable for any Carriage costs if i return it.
Bit unfair i think as i would only send it Special Delivery and that would probably cost me £10-£12.
beginner
Posted 28/04/2009 - 12:23 Link
Should have gone to "SRS!".......good luck in your quest for a replacement!........Ken
K20D...ist DS ,DA18/55,DA16/45.DA* 50/135,"A"1.7 50MM..."A" 70/210..M 50mm f2...Tamron 90mm macro,28/300 Tamron,200/500 Tamron 6.9....A Pentax DA*300... Sigma10/20,FA31mm 1.8 Ltd*********,FA 77mm Ltd!
CraigF1969
Posted 28/04/2009 - 12:38 Link
beginner wrote:
Should have gone to "SRS!".......good luck in your quest for a replacement!........Ken
Ermm..i did buy it from SRS.
It had a Memory card already in the camera and they said it was just to test the camera before shipment and not because it was a used model, but now i have that rubber coming away im not so sure.
johnriley
Posted 28/04/2009 - 12:51 Link
I'd suggest you phone them up, talk to them, and I'm sure they'll sort it out for you.
Best regards, John
hefty1
Posted 28/04/2009 - 12:53 Link
It's not a common problem but it has been reported before so you're not alone.

The rubber covering down there is purely cosmetic (ie it plays no part in the weather sealing etc) and if the camera went back to Pentax it'd just get stuck down with a dab of Copydex. To save the time and hassle (and cost) of sending it back I'd just invest in my own tube of Copydex if I was you - only a pound or two and comes in most useful for any number of other DIY fixes (camera or otherwise).
Joining the Q
CraigF1969
Posted 28/04/2009 - 12:56 Link
hefty1 wrote:
It's not a common problem but it has been reported before so you're not alone.

The rubber covering down there is purely cosmetic (ie it plays no part in the weather sealing etc) and if the camera went back to Pentax it'd just get stuck down with a dab of Copydex. To save the time and hassle (and cost) of sending it back I'd just invest in my own tube of Copydex if I was you - only a pound or two and comes in most useful for any number of other DIY fixes (camera or otherwise).
I will call SRS and make sure they are OK with me doing that.
Seems a lot of hassle to send it back and forth when thats all Pentax would do anyway.
Tooks
Posted 28/04/2009 - 15:11 Link
CraigF1969 wrote:
beginner wrote:
Should have gone to "SRS!".......good luck in your quest for a replacement!........Ken
Ermm..i did buy it from SRS.
It had a Memory card already in the camera and they said it was just to test the camera before shipment and not because it was a used model, but now i have that rubber coming away im not so sure.
That little exchange made me laugh out loud, sorry!

SRS will probably advise that you not try to fix it yourself, but that's what I would do anyway, rather than be without it for a while.

Copydex or other good contact adhesive is what I'd use.
beginner
Posted 28/04/2009 - 22:26 Link
Sorry about that!......I'm sure they will sort it out!....as for sticking it yourself,I wouldn't go down that road in case it has to go back in future!. If you have done a "Self repair", they might just wash there hands of it.....rules of warranty etc, best to contact SRS and arrange for it to go back. As for the card in the camera,check how many times the camera has been fired, just to make sure you have a "New camera!"..........
K20D...ist DS ,DA18/55,DA16/45.DA* 50/135,"A"1.7 50MM..."A" 70/210..M 50mm f2...Tamron 90mm macro,28/300 Tamron,200/500 Tamron 6.9....A Pentax DA*300... Sigma10/20,FA31mm 1.8 Ltd*********,FA 77mm Ltd!
Chris@SRSWATFORD
Posted 28/04/2009 - 22:57 Link
Hi Craig,

I was having a late night browse and saw this. Send it back to us and I will replace it and refund your return postage. If you need to speak to me then give me a call tomorrow (01923 226602)

Chris
For all things Pentax please visit www.srsmicrosystems.co.uk - anything not listed please email or call!

Follow us on Facebook
beginner
Posted 28/04/2009 - 23:01 Link
What a star this man is!......The perfect retailer!......
K20D...ist DS ,DA18/55,DA16/45.DA* 50/135,"A"1.7 50MM..."A" 70/210..M 50mm f2...Tamron 90mm macro,28/300 Tamron,200/500 Tamron 6.9....A Pentax DA*300... Sigma10/20,FA31mm 1.8 Ltd*********,FA 77mm Ltd!
Mike-P
Posted 28/04/2009 - 23:21 Link
My K10D did it a few weeks ago, bit of superglue on a needle tip and just a quick wipe under the flap and its now stuck down good as gold.
Don
Posted 29/04/2009 - 00:29 Link
One can only imagine the horror and sleepless nights of having a rubbber slip off...but I digress.....had it start to happen on an old mz5 way back when, was hardly noticable and a little rubber cement fixed'er right up.


good one on srs for exchanging that one! chris rocks!
Fired many shots. Didn't kill anything.
Edited by Don: 29/04/2009 - 00:30
hefty1
Posted 29/04/2009 - 00:37 Link
Mike-P wrote:
My K10D did it a few weeks ago, bit of superglue on a needle tip and just a quick wipe under the flap and its now stuck down good as gold.
While superglue certainly does the job I wouldn't recommend it. It'll hold the rubber down but those coverings are designed to be peeled back (they cover access screws for the body) and if it's been super'd the cover will have to be torn. That's why Copydex is perfect; it makes a gummy seal that'll hold fast until you actually want it to come away with a scalpel blade...

I think I've spent too long renovating tatty old cameras
Joining the Q
Lilly
Posted 29/04/2009 - 00:39 Link
beginner wrote:
What a star this man is!......The perfect retailer!......
STELLAR...is what he is!
website
BLOG
FLICKR

Pentax: K20D; FA50mm 1.4; FA135mm 2.8; FA 17-28mm; FA 80-320mm; AF360FGZ
Sigma: 30mm F1.4EXDC; 10-20mmEXDC ..... LENSBABY 'Composer' ,
Mike-P
Posted 29/04/2009 - 08:24 Link
hefty1 wrote:


While superglue certainly does the job I wouldn't recommend it. It'll hold the rubber down but those coverings are designed to be peeled back (they cover access screws for the body) and if it's been super'd the cover will have to be torn.
Well you could have told me that before I did it ...

Add Comment

To leave a comment - Log in to Pentax User or create a new account.



Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo