Lens Hood for K-X ?

justa
Posted 27/09/2010 - 12:30 Link
Hello

I am quite surprised that my K-X didn't come with a lens hood - i've looked on the internet and can't seem to find one - took some photos in Dorset over the weekend and got some lens flare - can anyone point me in the right direction ?

thanks
greynolds999
Posted 27/09/2010 - 12:31 Link
The hood needs to match the lens, and all Pentax lenses come with a hood. Where did you buy it?
Blythman
Posted 27/09/2010 - 12:35 Link
I need to sort out hoods too. They didn't come as part of the twin lens kit on offer at Currys. Disappointing.
Alan


PPG
Flickr
justa
Posted 27/09/2010 - 12:44 Link
Like Blythman I bought the twin lens kit from Currys...
JohnX
Posted 27/09/2010 - 12:46 - Helpful Comment Link
They're DA-L lenses - don't come with hoods.

Try SRS.

(There have been a few similar posts on the Forum; maybe a search?)
Edited by JohnX: 27/09/2010 - 12:47
Oggy
Posted 27/09/2010 - 12:50 - Helpful Comment Link
IIRC the kit lenses that come with Kx are DALs which do not come with hoods. I believe the hood from the equivalent DA fits, but maybe someone would confirm (or deny) that.

JohnX types faster than I
Edited by Oggy: 27/09/2010 - 12:50
Gwyn
Posted 27/09/2010 - 12:51 - Helpful Comment Link
I can confirm that the hood from the equivalent DA fits the DAL.

There are other generic hoods which will fit too if you search e-bay and the like.
greynolds999
Posted 27/09/2010 - 12:52 - Helpful Comment Link
OK, I'm baffled. it might be that Currys had a deal with Pentax not to supply the hood.

(EDIT - Should have typed faster)

You have various options. Buy the official Pentax hoods (which will help with long-term resale value), buy an aftermarket hood, or buy a universal hood which fits the filter thread.

There was a discussion about this a while back. One of the main reasons I always leaves the hood on is to protect the front element which you won't get with a rubber hood.

I'd try contacting Currys first and ask them (although I doubt you'll get far). Then check eBay.
Edited by greynolds999: 27/09/2010 - 12:53
Gwyn
Posted 27/09/2010 - 13:03 - Helpful Comment Link
The K-X as has been stated comes with DA-L lenses, which are never supplied with hoods. Nothing to do with Currys at all.
Dangermouse
Posted 27/09/2010 - 13:10 - Helpful Comment Link
My advice would be to get onto ebay and buy a couple of hoods. Don't just go for the generic ones that screw into filter threads, you can buy copies of the Pentax ones which clip onto the bayonet fitting around the front of the lens. Here is one for the 18-55mm, here is one to fit the 55-300mm.

The official Pentax ones are scarily expensive, and to be honest resale value isn't likely to be much with a kit lens anyway. They've made thousands if not millions of them so they're never likely to be rare.
Matt

Shooting the Welsh Wilderness with K-m, KX, MX, ME Super and assorted lenses.
justa
Posted 27/09/2010 - 13:23 Link
lovely thanks fir the help folks - DM sorry to be a thicky but how does a bayonet one fit ?
Dangermouse
Posted 27/09/2010 - 13:31 - Helpful Comment Link
It slots over the lens barrel and then clicks into the notches you can see there - it's a bit like the lid of a jam jar or indeed a bayonet fitting lightbulb.

This leaves the filter thread free for filters and also means that the hood will stay the right way up (with the longer petals on the top and bottom). The little clip-in bit on one side enables you to get at filters which need to be rotated such as polarisers.
Matt

Shooting the Welsh Wilderness with K-m, KX, MX, ME Super and assorted lenses.
justa
Posted 27/09/2010 - 13:32 Link
great stuff - thanks mate I will order one of those and see how i get on
JohnX
Posted 27/09/2010 - 13:45 Link
Here's the link for SRS - Pentax lens hoods.

http://www.srsmicrosystems.co.uk/Search/pentax/Category/Lens+Hoods/

One thing about the 18-55 hood, is that it might be cheaper to buy a lens with hood on ebay then sell on the lens.
Edited by JohnX: 27/09/2010 - 13:45
helios
Posted 27/09/2010 - 15:20 Link
Dangermouse wrote:
It slots over the lens barrel and then clicks into the notches you can see there - it's a bit like the lid of a jam jar or indeed a bayonet fitting lightbulb.

This leaves the filter thread free for filters and also means that the hood will stay the right way up (with the longer petals on the top and bottom). The little clip-in bit on one side enables you to get at filters which need to be rotated such as polarisers.
It also means that you can reverse the hood over the lens so that it does not take up much space in your camera bag. I got one of the cheapo Chinese clone bayonet hoods for my DAL 55-300 for under £10 and it appears to be identical to the official Pentax hood apart fom the Pentax logo.

Archie
Archie

Add Comment

To leave a comment - Log in to Pentax User or create a new account.



Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo