K20 sensor clean on start up
Posted 13/08/2009 - 13:03
Link
Personally I do not use this function. Shaking the sensor inevitably puts some stress on the mounts and other parts of the camera so doing this unnecessarily may result in a premature failure.
Posted 13/08/2009 - 13:09
Link
Quote:
Shaking the sensor inevitably puts some stress on the mounts
Presumably the designers would have taken that into consideration when they specced the camera. However it does sound and feel quite strong when i turn the camera on. What about the early adopters: anybody heard of problems with sensor mounts :
Shaking the sensor inevitably puts some stress on the mounts
Posted 13/08/2009 - 13:24
Link
I leave mine on, and I've not had a problem with the mechanism or with dust.
G
G
Keywords: Charming, polite, and generally agreeable.
Posted 13/08/2009 - 13:26
Link
Oggy wrote:
Personally I do not use this function. Shaking the sensor inevitably puts some stress on the mounts and other parts of the camera so doing this unnecessarily may result in a premature failure.
If the camera fails early then just use it as an excuse to upgrade!Personally I do not use this function. Shaking the sensor inevitably puts some stress on the mounts and other parts of the camera so doing this unnecessarily may result in a premature failure.
"Oh dear my sensor's broke, I'll just get a new..." at which point wife/partner kills you
Personally I have it enabled on my K200d and have had no problems so far.
Cheers, HG
K110+DA40, K200+DA35, K3 and a bag of lenses, bodies and other bits.
Mustn't forget the Zenits, or folders, or...
PPG entries.
K110+DA40, K200+DA35, K3 and a bag of lenses, bodies and other bits.
Mustn't forget the Zenits, or folders, or...
PPG entries.
Posted 13/08/2009 - 13:32
Link
I have had mine on since the day I got it and it has been OK since March 2009.
K1/K3, DA*16-50mm F2.8, FA 31mm F1.8, FA43mm F1.9 Limited, FA77mm F1.8 Limited, SMC Pentax K 85mm F1.8, DA18-135mm F3.5-5.6, FA*28-70mm F1.8, FA*200mm F1.8
Posted 13/08/2009 - 15:23
Link
I've had "anti dust shake on startup" turned on on my K10D (Dec 2006) and K20D (Mar 2008 ) since the day I got them. Both have over 10000 clicks and I've had no problems.
Good luck
Bob
Pentax user since 1978, Digital since 1997.
Kit includes: K-7, K20D, K10D, *istDS, full set DA* lens, etc
Bob
Pentax user since 1978, Digital since 1997.
Kit includes: K-7, K20D, K10D, *istDS, full set DA* lens, etc
Posted 13/08/2009 - 15:23
Link
Oggy wrote:
Personally I do not use this function. Shaking the sensor inevitably puts some stress on the mounts and other parts of the camera so doing this unnecessarily may result in a premature failure.
Same reason I never start the engine in my car Personally I do not use this function. Shaking the sensor inevitably puts some stress on the mounts and other parts of the camera so doing this unnecessarily may result in a premature failure.
You would hope the designers would have got this right.
Mike
---------------------------------------------------
You can see some of my shots at my Flickr account.
You can see some of my shots at my Flickr account.
Posted 13/08/2009 - 15:46
Link
Oggy wrote:
Personally I do not use this function. Shaking the sensor inevitably puts some stress on the mounts and other parts of the camera so doing this unnecessarily may result in a premature failure.
Sorry Oggy but I find this comment rather strange as that is how the Shake Reduction system actually works, it's designed to do that!
Personally I do not use this function. Shaking the sensor inevitably puts some stress on the mounts and other parts of the camera so doing this unnecessarily may result in a premature failure.
Posted 13/08/2009 - 16:20
Link
Greytop wrote:
When I had my K20D it was set to operate on start up, no problems at all.
Have you got the same facility on the K7, and do you use it?
When I had my K20D it was set to operate on start up, no problems at all.
Cheers, HG
K110+DA40, K200+DA35, K3 and a bag of lenses, bodies and other bits.
Mustn't forget the Zenits, or folders, or...
PPG entries.
K110+DA40, K200+DA35, K3 and a bag of lenses, bodies and other bits.
Mustn't forget the Zenits, or folders, or...
PPG entries.
Posted 13/08/2009 - 16:44
Link
Hardgravity wrote:
Yes and yes although it is different in that rather than the whole sensor assembly being shaken it is just the low pass filter in front of sensor that is vibrated but now an Ultrasonic frequency. Greytop wrote:
When I had my K20D it was set to operate on start up, no problems at all.
Have you got the same facility on the K7, and do you use it?When I had my K20D it was set to operate on start up, no problems at all.
This is the same method that Olympus have used for some time and tests have proven their method to be the best of any for dealing with sensor dust.
So now rather than an a mechanical rattle on start up you hear a very faint high frequency squeal for want of a better description
Posted 13/08/2009 - 17:27
Link
Well, that is cool. I have yet to see any use in the older sensor shaker method. Sometimes dust would move but never I've never seen where it would actually fall off. I always bring a rocket blower to do any cleaning. (luckily the coating is nice enough to have needed a wet cleaning only once in two years)
I am close to wanting an K7 and that adds to the list of benefits.
Although I am just not sure if I will be able to live with forced dark frame subtraction on bulb mode exposures and no more tethered capability.
I am close to wanting an K7 and that adds to the list of benefits.
Although I am just not sure if I will be able to live with forced dark frame subtraction on bulb mode exposures and no more tethered capability.
Posted 13/08/2009 - 19:23
Link
i have mine turned on from day i bought my k20,no problems
Posted 13/08/2009 - 20:23
Link
mikew wrote:
You would hope the designers would have got this right.
Mike
If you had to go to three adjacent shops, would you drive to the first, park up and stop the engine, then restart it and drive to the second and so on?Oggy wrote:
Personally I do not use this function. Shaking the sensor inevitably puts some stress on the mounts and other parts of the camera so doing this unnecessarily may result in a premature failure.
Same reason I never start the engine in my car Personally I do not use this function. Shaking the sensor inevitably puts some stress on the mounts and other parts of the camera so doing this unnecessarily may result in a premature failure.
You would hope the designers would have got this right.
Mike
One way or the other, there will be more wear and tear on the camera if it is used all the time.
If you haven't changed the lens, what is the point?
Add Comment
To leave a comment - Log in to Pentax User or create a new account.



1432 posts
17 years
Chester,
U.K.
Have read in another post; "some people think this is not a good idea".
Could "some people" explain further:
Davex.
Please feel free to play with any images I post.
My flickr: link