Another pointless thread

bforbes
Posted 05/04/2013 - 23:32 Link
DaveHolmes wrote:


Setting off first thing... Half day surfing half day pottering with camera...
if the hands stop shaking
Hardgravity
Posted 06/04/2013 - 06:44 Link
..or half day sat by fire thawing out!

Sod's law states that you can never stay in bed on a weekend...

...that's why I'm on this thread waiting for back up DVDs to burn...

Could be worse,I could then have to go to work...
Cheers, HG

K110+DA40, K200+DA35, K3 and a bag of lenses, bodies and other bits.

Mustn't forget the Zenits, or folders, or...

PPG entries.
techno-terminator
Posted 06/04/2013 - 08:05 Link
Question HG is

Are you up very early ?


Or is it a case of you are still up after a very late night ?
let the education continue

proud owner of a couple of cameras and a few bits and bobs
tyronet2000
Posted 06/04/2013 - 08:13 Link
North Sea:

Average Max temperature 17 °C (63 °F)
Average Min temperature 6 °C (43 °F)

References Safety at Sea and Royal Belgian Institute of Natural Sciences
Regards
Stan

PPG
greynolds999
Posted 06/04/2013 - 12:54 Link
I'm working today. Although I'm currently waiting for a hair cut. Then I've got to wash the bike. Even though it will be filthy again after half an hour of riding!

Next time I might buy one that's the same colour as the grime on the road.

But the sun is out and the temperature is above freezing so it's not all bad.
Edited by greynolds999: 06/04/2013 - 12:55
Gwyn
Posted 06/04/2013 - 13:32 Link
Just back from a trip to the tip, sorry, recycling centre. Cleared a bit more junk. Oodles more to go though.
The place was crawling in 'togs in hi-viz jackets. We don't have a camera club here, but maybe they were from one of the courses given at the community centre. I didn't ask. No Pentaxians that I noticed .
Hardgravity
Posted 06/04/2013 - 13:50 Link
I was up at 5.30 this AM, despite being worn out last night I just couldn't sleep!

I need to replace a set of head bearings on the Beema, do I start now or leave it for the morrow...

....I'll have a coffee and think about it.
Cheers, HG

K110+DA40, K200+DA35, K3 and a bag of lenses, bodies and other bits.

Mustn't forget the Zenits, or folders, or...

PPG entries.
Stuey
Posted 06/04/2013 - 14:15 Link
Hardgravity wrote:
I was up at 5.30 this AM, despite being worn out last night I just couldn't sleep!

I need to replace a set of head bearings on the Beema, do I start now or leave it for the morrow...

....I'll have a coffee and think about it.
How about start it now then leave it until tomorrow
K10D, K5 plus plenty of clueless enthusiasm.

My Flickr site link
Hardgravity
Posted 06/04/2013 - 17:51 Link
That's how a rebuild of the RD400 started..

...26 years ago!!

It's still in bits on the bench....

Beema work will commence tomorrow AM.
Cheers, HG

K110+DA40, K200+DA35, K3 and a bag of lenses, bodies and other bits.

Mustn't forget the Zenits, or folders, or...

PPG entries.
OldTaffy
Posted 06/04/2013 - 18:04 Link
Gwyn wrote:
Just back from a trip to the tip, sorry, recycling centre. Cleared a bit more junk. Oodles more to go though.
The place was crawling in 'togs in hi-viz jackets. We don't have a camera club here, but maybe they were from one of the courses given at the community centre. I didn't ask. No Pentaxians that I noticed .
Maybe they were all 'togs who had been told to dump their canikons?
A few of my photographs in flickr.
Lizars 1910 "Challenge" quarter-plate camera; and some more recent stuff.
DaveHolmes
Posted 06/04/2013 - 20:27 Link
I'm back! I can stand up and turn on a surf board and fall off lots too!!

Winter wetsuits (5:3) work really well... Boots and gloves were also supplied and I wasn't cold at all!!

Took a couple shots at Cayton Bay after then drove to North Bay and took a walk... Will upload a few in a bit (LR3 currently running a bit slow...)
........................................................................
Digital:
Pentax K5- Vivitar 19mm 3.8; FA35mm f2; D-Xenon 100mm macro f2.8; DA50-200mm WR...
Flash:
Yongnuo YN-560; Vivitar 285HV; Cactus V4 triggers...
Film:
Pentax-MX & M50mm f1.4; Spottie & 55mm f1.8; MG & M40mm 2.8...

https://www.flickr.com/photos/daveholmesphotos/
Stuey
Posted 06/04/2013 - 20:47 Link
Nice to see you survived the North Sea David
K10D, K5 plus plenty of clueless enthusiasm.

My Flickr site link
Stuey
Posted 06/04/2013 - 20:49 Link
Hardgravity wrote:
That's how a rebuild of the RD400 started..

...26 years ago!!

It's still in bits on the bench....

Beema work will commence tomorrow AM.
Oh dear, the Yam will have to wait a while longer I suspect

At least the BMW shouldn't take too long to sort though
K10D, K5 plus plenty of clueless enthusiasm.

My Flickr site link
Hardgravity
Posted 07/04/2013 - 07:59 Link
certainly will, and seeing as the carbs are seized solid...

Nice sunny morning, head set looking at me on the desk, think it's breakfast then fitting time...

....I may be some time, to quote a certain captain...
Cheers, HG

K110+DA40, K200+DA35, K3 and a bag of lenses, bodies and other bits.

Mustn't forget the Zenits, or folders, or...

PPG entries.
Hardgravity
Posted 07/04/2013 - 13:56 Link
Well, that didn't take too long..

...but the old head set was OK...

........just solid with set grease!

A quick wash in petrol and WD40, some fresh lithium grease and she's back in one piece.

Now I have to get her fueled up and then it'll be Beer o'clock...
Cheers, HG

K110+DA40, K200+DA35, K3 and a bag of lenses, bodies and other bits.

Mustn't forget the Zenits, or folders, or...

PPG entries.

Add Comment

To leave a comment - Log in to Pentax User or create a new account.



Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo