unhappysnapper

Joined: 22nd August 2016

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

unhappysnapper
JAK wrote:
Pleased your K30 is sorted and happier now!
Seems OK now, fingers crossed

Comment by unhappysnapper posted on SDM lens & camera's focusing switch at 15/11/2016 - 18:21

unhappysnapper
JAK wrote:
Pleasure. Note your user name, why are you an unhappy snapper? Or has that changed since getting a Pentax?
I joined the forum as I had the dreaded aperture motor failure on my K30 (now resolved).
At the time I was very unhappy, but now I'm a bit happier !!
It was a play on the term "happy snaps"

Comment by unhappysnapper posted on SDM lens & camera's focusing switch at 15/11/2016 - 17:39

unhappysnapper
redbusa99 wrote:
just note when you disable shutter release focus it disables CIF as well, should you wish to use it shutter release focus has to be enabled. found that out after thinking it had gone wrong when i switched to back button focus
Thanks for the info...much appreciated

Comment by unhappysnapper posted on SDM lens & camera's focusing switch at 15/11/2016 - 17:22

unhappysnapper
JAK wrote:
For auto focus both switches need to be on AF. If either or both are on MF that's what you'll get.
If you use back button focussing rather than the shutter release focussing you get the best of both worlds. The lens will focus when you press the rear AF button, but will not try again when you press the shutter release so you don't have to wait while it tries to focus yet again. Might not be ideal for every subject but often works the best, though might need a bit of getting used to.
I've been trying to think of any instances where back button focussing may not be ideal. I'm still thinking... nothing's come to mind so far!
Thanks for the advice....much appreciated.

Comment by unhappysnapper posted on SDM lens & camera's focusing switch at 15/11/2016 - 17:15

unhappysnapper
This might seem like a daft question to some, but can anyone advise me, with regard to using a SDM lens……..

When the focus selector switch on the lens is switched to AF, what position should be selected on the camera’s focus selection switch?

I have a Pentax K30 with AF.S/C/MF settings, I don’t yet own a SDM lens, but I am considering one.

Comment by unhappysnapper posted on SDM lens & camera's focusing switch at 15/11/2016 - 15:26

unhappysnapper
William_Herschel wrote:
Yeh mine finally bit the dust and every shot is black. I’m going the Johnsons route too, but I’m not sure I will get it done FOC. Maybe weight of numbers will come into force and we'll all get justice from Pentax. However even their repair quote makes it a better alternative to buying a new camera so I hope the repair lasts longer than the original.
Update: I received an email from Johnsons, after they had contacted Ricoh, with an estimate for £90 plus VAT to repair. I accepted this as it was a reasonable reduction on their original quote of £170 plus VAT. I have the camera back now and its working fine.

The invoice details the work carried out as follows:
Replaced mechanical assembly.
Repaired shutter and mirror mechanism.
Cleaned viewfinder and CCD.
Check and test.

Comment by unhappysnapper posted on The dreaded K30 aperture motor failure strikes again at 04/10/2016 - 21:15

unhappysnapper
William_Herschel wrote:
Just to add to the weight of evidence. I used manual lenses from an old Spotmatic for a couple of years so there was no problem. To get with it I bought a 35mm Pentax lens and was surprised to find the first shot was black. You think it’s you to start with, but after looking into it is isn’t. Fortunately, only the first shot is black at the moment and all subsequent shots are correctly exposed. I’m reluctant to rely on Ricoh doing the honourable thing that somebody else experienced so at the moment I click once and then again.
Mine started off with just the first shot black. A couple of months later and now its the first four or five shots !
After exchanging a few emails with Johnsons they asked me to send my K30 to them.
They have informed me that they have inspected it and have contacted Pentax. I am waiting to hear the outcome.

Comment by unhappysnapper posted on The dreaded K30 aperture motor failure strikes again at 18/09/2016 - 19:20

unhappysnapper
Algernon wrote:
Detailed instructions of how to strip down the K-30 are given on the Penta-Club site.

Use Google Translate ....

http://www.penta-club.ru/forum/topic/137296-%D0%BF%D0%BE%D0%BC%D0%BE%D0%B3%D0%B8%D1%82%D0%B5-%D1%81-%D0%BA30/page__st__180


--
Thank you

Comment by unhappysnapper posted on The dreaded K30 aperture motor failure strikes again at 05/09/2016 - 21:34

unhappysnapper
richandfleur wrote:
unhappysnapper wrote:

Do you have a link to the online manual, please?
All buried in this package.
Many thanks

Comment by unhappysnapper posted on The dreaded K30 aperture motor failure strikes again at 05/09/2016 - 21:33

unhappysnapper
richandfleur wrote:
The official repair is to replace the faulty mechanism. It costs what it costs because you are getting new replacement parts.

If you are going to attempt taking your camera apart, I highly recommend purchasing the online manual which details the disassembly steps. Specifically watch out for the top ribbon cable connector as this is extremely fragile
Do you have a link to the online manual, please?

Comment by unhappysnapper posted on The dreaded K30 aperture motor failure strikes again at 02/09/2016 - 22:05

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo