All Forum Comments
Comment by Stuey posted on Another pointless thread at 13/04/2013 - 12:42
Hello and welcome
Comment by Stuey posted on Returning to Pentax again at 13/04/2013 - 12:40
Hi David
I agree it is nice two return to a moisture ridden land after a hot dry place
Thanks for the response Alan - it turns out that my better half filled the pippette with surgical spirit this time whilst I was busy throwing my rattle out of the pram but I have tried all manner of fluids previously, none worked but not 'meths' though I drink that instead
I am feeling conned by epsom as the r360 uses a stupid amount of ink for 'head cleaning' and even though nothing at all will come out of the yellow printer head each time I clean the heads the software/printer tells me that the level has dropped and my thought is simple if it won't come out of the one place it is meant to where the hell is it :: that's why I feel conned (epson rant mode)
Equally when it states that the cartridges are empty they have a significant amont left in (up to a third) and this happens with epson and compatible cartridges - I emptied a few into measuring jugs and compared what came out to the supposed content amount
Whilst I like the results from the epsons I am having a hard job trusting the R360 whereas I have never had issues like this with porevious ones except for the blockages
Hopefully that is moan over
I may just wander into a shop later and take a random punt on a new printer brand
I agree it is nice two return to a moisture ridden land after a hot dry place
Thanks for the response Alan - it turns out that my better half filled the pippette with surgical spirit this time whilst I was busy throwing my rattle out of the pram but I have tried all manner of fluids previously, none worked but not 'meths' though I drink that instead
I am feeling conned by epsom as the r360 uses a stupid amount of ink for 'head cleaning' and even though nothing at all will come out of the yellow printer head each time I clean the heads the software/printer tells me that the level has dropped and my thought is simple if it won't come out of the one place it is meant to where the hell is it :: that's why I feel conned (epson rant mode)
Equally when it states that the cartridges are empty they have a significant amont left in (up to a third) and this happens with epson and compatible cartridges - I emptied a few into measuring jugs and compared what came out to the supposed content amount
Whilst I like the results from the epsons I am having a hard job trusting the R360 whereas I have never had issues like this with porevious ones except for the blockages
Hopefully that is moan over
I may just wander into a shop later and take a random punt on a new printer brand
Hi all
We appear to have killed two Epson printers by lack of use - I believe but cannot be sure that the reason is the epson printer cartridges don't come with a new print head (but others do) so when the print head dries up the printer is useless - I have tried the paint thinners etc into the head with a pipette but no use
Any how, we have decided that maybe, as the printer is pretty much only used for the little fella's homework we should buy a different brand printer but a fairly basic one and if we dry up a catridge we should just be able to replace the cartridge and be okey dokey hopefully
Anyone able to correct this idea, improve on it and if so any suggestions for a printer:
And....
If any one out there is managing to keep an Epson C64/C66/C84/C86/C3600/C3650/C4600/CX6400/CX6600 running we have three unopened (compatible) ink cartridges (E-T0441)on the shelf that anyone can have if they will pay the cost of postage
Our current model is an Epson R3600 but this is probably off to be recycled - hopefully not to China/India etc to pollute our rice supplies though
Cheers
Stu
We appear to have killed two Epson printers by lack of use - I believe but cannot be sure that the reason is the epson printer cartridges don't come with a new print head (but others do) so when the print head dries up the printer is useless - I have tried the paint thinners etc into the head with a pipette but no use
Any how, we have decided that maybe, as the printer is pretty much only used for the little fella's homework we should buy a different brand printer but a fairly basic one and if we dry up a catridge we should just be able to replace the cartridge and be okey dokey hopefully
Anyone able to correct this idea, improve on it and if so any suggestions for a printer:
And....
If any one out there is managing to keep an Epson C64/C66/C84/C86/C3600/C3650/C4600/CX6400/CX6600 running we have three unopened (compatible) ink cartridges (E-T0441)on the shelf that anyone can have if they will pay the cost of postage
Our current model is an Epson R3600 but this is probably off to be recycled - hopefully not to China/India etc to pollute our rice supplies though
Cheers
Stu
SMC M 1:4 200mm £45
I love my 200mm f4 m - £45 is a decent price if it is a mint one - I assume it is
I love my 200mm f4 m - £45 is a decent price if it is a mint one - I assume it is
Comment by Stuey posted on 55-300 --- K7 --- SMC M 200 --- SMC M 135 at 12/04/2013 - 21:36
Woo hoo - I've had a bad day in work but followed by my windscreen being repaired 'gratis' - watched Scarlets win with my son whilst eating the curry I prepared last night and drinking 'Old Crafty Hen'
Comment by Stuey posted on Another pointless thread at 12/04/2013 - 21:25
Hello and Welcome
Comment by Stuey posted on Hello fellow addicts. at 12/04/2013 - 21:20


That's a coincidence, I had my windscreen repaired today too
Bet my chip was bigger than your chip
My winscreen is a bigun but the chip was teeny weeny