sraff

Joined: 30th October 2008

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

sraff
PM semt Matt, thamk you

Comment by sraff posted on Coolscan IV help at 10/03/2011 - 08:50

sraff
Okay take two, I have got my hands on the other half laptop for now.

Is there anyone who owns one of these scanners that would be happy to send me a full size/res scan of a BW 100 amd 400 speed film.

I currently have the Epsom 4490 amd trying to decided if the upgrade is worth while. I know the quality is said to be much better but it would be nice to see it first hand.

Obviously there are alot of variables that can effect things but I believe it would give me a good idea.

Ideally something 1200 dpi or over.

Huge thanks

Comment by sraff posted on Coolscan IV help at 09/03/2011 - 19:36

sraff
Is there amyome who owms ome of these scammers that would be happy to semd me a full size/res scam of a BW 100 amd 400 speed film.

I curremtly have the Epsom 4490 amd tryimg to decided if the upgrade is worth while. I kmow the quality is said to be much better but it would be mice to see it first hamd.

Obviously there are alot of variables that cam effect thimgs but I believe it would give me a good idea.

Oh amd sorry for all the mmmmmmmmm but my letter after that comes after that ome has just packed up

Huge thamks

Comment by sraff posted on Coolscan IV help at 09/03/2011 - 19:12

sraff
From what I can see the Z-1P doesn't have continuous AF. Again a shame as a nice looking package.

Comment by sraff posted on *ist maybe? at 07/03/2011 - 22:58

sraff
Thanks Mannesty, shame.

Comment by sraff posted on *ist maybe? at 07/03/2011 - 22:46

sraff
Thank you for all the replies.

MLU = Mirror lock up, for the reduction of mirror shake during slower and long exposures.

John - Yes I love the body and functioning of the MZ5n with the old school dials, shame it doesn't forefil my wants/needs. Two bodies would be an option but that would mean two with MLU and CAF.

Giofi - Thanks for the suggestion I will have a look at the Z-1P details.

Mannesty - Again thank you and I will check, I think I bypassed the MZ6 before as I preferred the MZ5n body.

Steve - Sorry to here you lost so many shots, cant decided if that or forgetting film is worst

Comment by sraff posted on *ist maybe? at 07/03/2011 - 21:55

sraff
Currently I have MZ5n which is very nice little camera but there are a few things missing that bother me.

1) no MLU
2) no continuous AF
3) no mid roll rewind leaving the leader out

Looking at other brands and about £130 gets me a Canon EOS 3 which covers the above but as I already have some Pentax glass and a GX-20 It would be nice to stay put.

Been searching around for a while now and not finding a great deal of information on the *ist other than some basic info. I realize the MZ-S would probably do the trick but this is more like £300 so kinda out the question. The MZ-3 I don't think make's a difference really from my MZ5n.

All my glass I care about is either 'F' or 'A' series, I wouldn't be buy anything older.

So really I guess it just comes down to whether the *ist has the above things or whether I'm missing something else.

There is the thought of selling the GX-20 which could fund a MZ-S but I don't think its worth the extra £170 against the EOS 3.

Any thoughts, link or advice would be appreciated.

Comment by sraff posted on *ist maybe? at 06/03/2011 - 23:27

sraff
Well it would appear that once out of panic mode I was able to come back to it and work out how it pieced together. Also a decent adjustable table light, a white tray and steady hands helped.

I found the very very small hole where the bearing did indeed sit on top of a spring, great care was needed for it not to move while placing things back together (small drop of grease would of made that bit easier).

As for the springs I needed to think outside of the box and then realized that one folded back on itself and and on both the arms needed to be the other side of the (thingys??) to apply the needed pressure.

So now its all back together and fully working. The 'A' mode works fine and all the apertures and half stops click into place well.

The pin was removed and the lens comes on and off the body (GX-20 in this case) and locks in place. Tomorrow I have a MZ5n arriving so will check its all fine on that body also.

Thank you for looking in and in the future if anyone needs some advice with that job let me know as it all seems too easy now its done.

Stephen

Comment by sraff posted on Oops Help.... Sigma KPR at 15/02/2011 - 15:24

sraff
I dear well maybe someone here can help or at least point me in the right direction.

On receiving a Sigma 28mm mini wide II I realized that it was the KPR version. Having just removed a pin from a Sirius KR lens I thought no problems I'll do the same with this one. So all too hastaly I set about doing it and indeed was successful in removing the pin. Big problem being that two small springs (straight wire bent in a loop type) came out and a bearing that must have something to do with the clicking of the apertures. I can get the idea of what the springs need to achieve but just cant see how they go.

Does anyone have any experience of doing this or have the lens and the know how to look point out where things sit.

Or am I doomed and have to take this one on the chin????

Thank you in advance.

I can try and post pics later if that will help.

Stephen

Comment by sraff posted on Oops Help.... Sigma KPR at 15/02/2011 - 11:40

sraff
Thank you Flossie,

Seems like the 'A' is the one to go for really where wildlife is concerned, the 'M' is doable but sometimes even with modern AF lenses the subject make it very hard to nail that shot.

Well now gone round in a circle as the 'A' versions seem to go for about the same price as the Sigma 170-500mm. So would still love to here how these two compare.

Comment by sraff posted on Pentax 400mm 5.6 vs Sigma 170-500mm at 04/01/2011 - 12:48

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo