Sprocketdog23

Joined: 22nd December 2011

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

Sprocketdog23
What power are your Ni-MH batteries rated at. It should be printed on them. I would suggest that you should use 2500mAh or higher rated batteries. Alternatively, but its quite expensive, a set of AA Lithium batteries will definitely have the power needed. I used to run Lithium AA batteries in my Nikon F100 35mm film camera, and they lasted ages and were able to supply enough power for the camera and drive over an extended shoot.

Comment by Sprocketdog23 posted on IstDS Battery Problems at 25/12/2011 - 21:17

Sprocketdog23
Its superb at that price, and includes loads of cinematic colour effects. I'm really grateful for the link and the review. As the other half as yet to do any Xmas shopping, I should tell her it's on my wishlist.

Comment by Sprocketdog23 posted on Simulating Film types on K-5 at 23/12/2011 - 18:07

Sprocketdog23
Thanks Agernon, not used these ones and they do look to be a very impressive set from the examples on the website. I like that they are subtle but powerful, in that the set include filters that are really useful rather than immediately eye catching, so appear to be of more long term value. Bit of a bargain price too. Thanks

Comment by Sprocketdog23 posted on Simulating Film types on K-5 at 23/12/2011 - 18:00

Sprocketdog23
Wow, not seen the Topaz software before, I'll have to give the trial a go and see how it goes, thankyou NaimKhan.

The ability to save 5 User modes was a big selling point when I chose the K-5 riebleu. Like you I also have a Panasonic P&S (the TZ-19) which has 3. On that camera I have one set for shutter priority at 3:2 aspect, AWB, Auto ISO. Another reserved for B&W grainy film, 1:1 aspect, and the third for High Speed Burst, 4:3 aspect. A nice little bit of brilliance from Panasonic for chucking so much into these cameras.

On the K-5, that first one of mine, with the reversal film with highlight and shadow correction up high gives an incredibly clean bright result, and needs very little PP. Try it if you get a chance. I found it works best under studio lighting, or under normal indoor lighting inside with Tungsten WB.

Comment by Sprocketdog23 posted on Simulating Film types on K-5 at 23/12/2011 - 17:03

Sprocketdog23
Thanks Riebleu, I should have added that I have FilmPack, so can use it as a guide. It's a pretty good package, especially the simulation of my favorite B&W films (Tri-X and HP5). I work all day using software to process imagery, (my main employment is teaching creative industries courses up to BA (Hons) level at a large FE/HE college). What's of interest to me though is the on-camera settings on new DSLR's, and was also one of the factors in me choosing a K-5. Fuji built in Velvia/Provia modes into their DSLR's years ago, but I think Olympus started the current trend with built in 'Art Filters', although some were pretty useless. Pentax have taken it a lot further, with an approach that is much more mature and flexible.... but one day we might get the option to model the colour/tonal settings/filters etc in an external programme and upload to the camera (or even installing software on our DSLR's to do this. Mobile phone camera apps seems way ahead in this respect.

I understand there are a lot of purists out there, who prefer to shoot in RAW, and edit in software. Thats great, and for 90% of my professional work thats what I do. Sometimes though, it is fun to experiment, and even take risks on assignment. Photographers such as David Burnet used a $20 Holga on assignments for instance link, and perhaps it is by breaking the restraints that innovation comes. Its happening more often that clients expect work to be photographed, edited an uploaded with really short deadlines, and may ask for a particular style to the work. RAW processing might not be an option, so quick and easy tricks with settings and shooting JPG is often more convenient. I have got a job like that coming up in the new year, where I have about a 2 hour turnaround, including the shoot, before the images go to print.

So far I have a User mode for a bright transparency film (1) look which seems good for product shots and studio work, and a general purpose 'grainy B&W' (2), but which still needs some work. Inspired by this work link I'm working on a pale colour and flat tone effect today (3).


(1) Reversal Film, ISO 100, Highlight Correction-on, shadow correction-high, sharpness +2

(2) B&W, ISO 1600, Filter Effect-to suit subject, Toning-neutral, H/L Key Adjust +2, Contrast-maximum, Sharpnes +1

(3) Muted, ISO 400, Highlight Correction-?, shadow correction-?, Saturation-minimum, Hue -1, H/L Key Adjust-maximum, Contrast-minimum, Sharpness-minimum

Comment by Sprocketdog23 posted on Simulating Film types on K-5 at 23/12/2011 - 10:15

Sprocketdog23
Hi gartmore. thanks for your reply, but I want to do this precisely because the K-5 can do it, and do it well.
I can easily do simulated film in post production, granted, but you have to ask yourself, why would Pentax give us so many colour/tone and sharpening options on board, and multiple saveable user modes if we just ignore them?. Maybe you just use your camera in its default state, and good for you if thats the case, but please enlighten me 'on the look of digital', as I'm not sure what that is? Every DSLR I've used has a different approach.

Furthermore, when I did shoot film, professionally or otherwise, I chose a particular film brand because it had a certain look and feel.... My new K-5 can not only simulate these, but endless experimental ones of my own devising, and it obviously lets me see the results during the shoot which has to be a good thing in terms of my decision making.

By the way, currently in the Tate Modern in London is a fantastic exhibition called 'New Documentary Form'. There is some brilliant work by a number of modern day photographers some of whom are very experimental with the format, and have replicated some previous processes. Take a look at the work of Boris Mikhailov for instance link. Pretty amazing stuff.

Comment by Sprocketdog23 posted on Simulating Film types on K-5 at 22/12/2011 - 20:40

Sprocketdog23
Thanks for all the welcomes, it's great to find a busy forum

Comment by Sprocketdog23 posted on Well, I'm new here.... at 22/12/2011 - 19:28

Sprocketdog23
Thanks John. I'm going to start with that setting, and experiment. Thought I would photograph at locations where I have previously shot with film stock, and play with the settings on my K-5 in the field and check against the original imagery I have previously scanned in using SilverFast, which does a pretty good job of retaining the films original look post scan. I'll post up side by side results as and when I make them.

Comment by Sprocketdog23 posted on Simulating Film types on K-5 at 22/12/2011 - 19:25

Sprocketdog23
I think there might be an advantage to 5 point when in AF-C mode tracking motorsport.
I haven't done this on my K-5 as I only got it this week, but experience with shooting with previous cameras at Drag Race events, I found that having less focus points was faster and more responsive, and I got cleaner results.
Similarly, when shooting fast moving wildlife, less points was better for tracking shots (in AF-C).

Maybe Pentax AF is better than other DSLR makes in this respect, I can't say yet, but it would be my guess that it would be better to use 5 points for tracking shots at motorsport.

Comment by Sprocketdog23 posted on K5 11 Point AF / 5 Point AF Question at 22/12/2011 - 17:58

Sprocketdog23
Been rummaging about in my new K-5 seeing if I can set up the JPG colour modes to simulate fondly remembered film types. I'm still way off, so has anyone else got any recommended settings, for, in particular, the look and feel of a grainy B&W like pushed HP5, as well as an approximation of Kodachrome. I know I can do this easily in Post Processing on my Mac, but great to have all the options on hand in the K-5. So far I'm kind of getting a nice bright, clean, transparency feel that reminds me of Provia, and some interesting B&W varieties set up in the USER mode, but I'm guessing theres a wealth of experimentation out there, and it would be nice to hear what others have set up.

Comment by Sprocketdog23 posted on Simulating Film types on K-5 at 22/12/2011 - 17:48

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo