richandfleur

Joined: 3rd December 2012

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

richandfleur
cardiffgareth wrote:
HSS won't freeze a subject better than non HSS shooting. As stated HSS acts like a constant pulse of light that illuminates light for a prolonged period of time. A standard flash set at 1/64th power is "on" for 1/20,000th of a second! This is why, when using flash to stop water splashes in their tracks and make sure they're absolutely pin sharp like a tact, flashes are set to one of their lowest power settings so the on/off duration is immensely fast. As you turn up the flash power the duration starts to decrease. Fast forward to HSS and lets say you have a shutter that's open for say 1/2000 sec...
Thanks for taking the time to write this

Good to know.

Comment by richandfleur posted on K3 II - FPS in HSS at 26/03/2017 - 21:25

richandfleur
McGregNi wrote:
Thanks! Yes, we need to get those flashes out far more often, that is all of our homework!
Good advice Nigel!

Had a bit of a play with rear curtain sync recently. Was happy with how it came off.

Still struggle with 'normal' flash shots where very often the rear of the scene is nicely exposed and my subject is blown out like a bright ghost. Not entirely sure how to tell the camera to expose nicely for the front subject? Do I have to set the camera to spot meter with P-TTL enabled? This has traditionally been a bit risky and I typically use centre weighted metering to head towards this and ensure some consistency.

Comment by richandfleur posted on Pentax DSLR Models & Flash Options at 26/03/2017 - 20:59

richandfleur
SteveLedger wrote:
Objective consideration and outlaying of the facts. No bashing is necessary or could be a valid rebuttal as anyone can check the facts.
Thanks.

I haven't used the supplied Pentax software ever, so can't comment on this aspect.

Comment by richandfleur posted on Updates for our system cameras at 26/03/2017 - 07:54

richandfleur
SteveLedger wrote:
richandfleur wrote:
Firmware is software. It dictates how the hardware behaves and doesn't relate at all to the ongoing choice to maintain the same camera mount type..
Yes of course it is, I was separating firmware from software insofar as the application software that Pentax supply for your computer, which is rarely updated [and supports your original body]. Olympus have updated their software three times in the short time I have been an Oly shooter..
Essentially you are agreeing with me, but I just wanted to make that point.
Was resonding to John above Steve, but do agree with your comments re firmware vs supporting software applications as well.

I'm sure this comes off as Pentax bashing to some, but it's really an observation that Pentax are genuinely quite tight in this area. Likewise attention to video, but I fully understand that video is more of a niche area, affecting less users than functionality firmware updates would impact.

Comment by richandfleur posted on Updates for our system cameras at 26/03/2017 - 05:49

richandfleur
Firmware is software. It dictates how the hardware behaves and doesn't relate at all to the ongoing choice to maintain the same camera mount type.

Pentax has done very little to build upon the capabilities of their models from release date. Typically fixing any errors and providing support for new products such as teleconverters for example.

If you buy a Pentax, you had better be happy with everything it has, or doesn't have, at the time of purchase. You'll have to purchase new products to gain new features at a later date, even if your original hardware is technically capable.

Comment by richandfleur posted on Updates for our system cameras at 26/03/2017 - 05:08

richandfleur
Actually thinking about the polariser, in terms of blocking the sunrise reflection off the water.

It's worked a treat, but I wouldn't have thought of that initially. Good stuff.

Comment by richandfleur posted on This mornings meet with Chris @ Penarth Pier at 25/03/2017 - 21:56

richandfleur
Soo good

Comment by richandfleur posted on This mornings meet with Chris @ Penarth Pier at 25/03/2017 - 21:27

richandfleur
This is one area Pentax could learn a lot from.

Fuji really fills you with confidence that they are going to support you as a customer, by continuing to develop the product long after you have purchased it.

It's really impressive. Their last effort before this one had so many improvements they had to issue a whole new manual to accompany it. I'm totally impressed with their after market support.

Comment by richandfleur posted on Updates for our system cameras at 25/03/2017 - 20:13

richandfleur
RobL wrote:
Baffled by the omission of the wireless trigger option in the K70 pop-up flash, I have it on the K50 and to me is the best reason for the pop-up flash. Do you think Pentax is exploring a radio trigger option instead?
Sadly no, I feel they're intentionally crippling lower level cameras in an effort to emphasise the points of difference between the higher level models.

It's sad when software is used like this, when the camera itself has the hardware required and is physically capable.

Comment by richandfleur posted on Pentax DSLR Models & Flash Options at 23/03/2017 - 21:10

richandfleur
Your work here is simply great. Well done mate.

Comment by richandfleur posted on Pentax DSLR Models & Flash Options at 23/03/2017 - 01:07

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo