All Forum Comments
Comment by richandfleur posted on Anyone using their DSLR for video at 16/07/2014 - 08:47
This method of focus checking is very good, and is ideal if you are using a tripod. If not using a tripod then your body can still move after setting the focus, which may be an issue if you have set a very narrow depth of field aperture.
For completeness it should be mentioned that the above behaviour is very very similar to the live view image review option. So once you have taken a photo, you can do the exact same above to review it for sharpness/focus check etc too. All the controls are the same from memory and you can control how far it initially zooms in via menu setting options also.
Comment by richandfleur posted on Focus peaking query. at 13/07/2014 - 23:26
The SMC-DA 50mm F1.8. The brand new digital configured lens, that will work on FF
I thought the latest cheap plastic mount 50mm was APS-C only?.
The manual focus 50mm's are quite very cool given they're quite heavy, solid and gives a real mechanical feedback experience. They have a real aperture ring on them also, so this is good for extension tube work potentially. I have opted for the A version, but then again I tend to use full Manual mode when I use this anyway so it's not so much of an issue.
I wouldn't mind an autofocus version, but I feel I'd use that for different work than how I currently use the older manual 50mm lens. The field of view can be quite narrow on APS-C bodies, so I've tended to use the autofocus 35mm instead for this type of work.
Sorry, just a few thoughts out loud there
Comment by richandfleur posted on Good or bad lens ? at 13/07/2014 - 23:20
Comment by richandfleur posted on Lens confusion.. at 13/07/2014 - 23:12
I have recently purchased an action cam that generates it's own local wifi hotspot that any cell phone can pick up, and which doesn't require an existing wifi network etc. You then download the app to your brand of phone and you are good to go. Drains the battery of course but there's nothing fancy about the method it uses to connect.
Point is technology like this is available and nowadays should be built in. I'm not going to use wifi to download images off my memory card, instead I'd use usb3 for this if available. I would like the tablet or cell phone connection for controlling the camera remotely. I've seen some cool rigs made up with the camera up a pole to film and shoot above a crowd etc, with full control from a device down below. Realistically the ability to wifi direct to facebook etc would appeal in the market I would think.
None of this is every bodies cup of tea, and it certainly wouldn't be my first request from Pentax/Ricoh either. What I'm more and more focussed on these days is that feature requests either fall into hardware or software categories. Improving the software gives more features for no change in hardware, and it can be rolled out to existing devices via software update also.
As a point of difference moving forward, are you buying the complete Pentax today only, or are you buying the hardware which will continue to be developed upon in features over the course of it's lifecycle?
Comment by richandfleur posted on Dear Pentax Ricoh at 13/07/2014 - 22:59
I have sensed your frustration at times
The newer software models, from the q, K-01, K-30, K-3, 645z etc all have much more flexible video controls. In that there is an option for full manual control for a start plus the options for 1080p 24 fps. That really is all great and it is a real step in the right direct. However, they then go and stuff the stabilisation, and don't allow the cool stuff when you use the video, such as focus peaking, which I feel I could really benefit from, given the way I use lenses most during my shooting.
Even if you turn 'Movie SR' off, which instantly removes one of Pentax's strong marketing points of IBIS, the screen is still cropped down, so if you then apply your own image stabilisation afterwards it will have to be cropped in tighter again still.
I don't like how this is often dismissed as "it's a stills camera", "I never use video anyway", "you shouldn't have brought a Pentax for video anyway" etc. It IS there, some aspects are already very good, others don't work particularly well, it could be awesome with a tiny bit of effort, end of story really.
Oh what I wouldn't give for just 10 minutes with an actual Pentax software developer!
Comment by richandfleur posted on Anyone using their DSLR for video at 11/07/2014 - 00:45
I assumed that my K7 (& sensor shake SR systems generally) would not have any software stabilisation going on at all?
are you saying then that the 645z example there would not be better with SR off on the tripod (the slow pan bit I mean) ?
If you think about why you had to turn it off (or why it was suggested to) during panning, it was because the sensors would detect movement (during the start of the pan especially) and assume it was (unwanted) camera shake and start to correct it.
With an image/visual assessment only based system, the camera is not using any information from the physical movement sensors. It's having to evaluate what's changed in the image from last time, and how it should manipulate the image (rotating it, sliding it, warping it perspectively etc) to keep it steady. (This is why the image is cropped on the newer cameras also, as you need to leave some wiggle room to move the image around and still be able to crop a constant bit out from the middle.)
I can't stand this guys voice, but check out how long Premiere takes to calculate the stabilisation on a 4 second clip here
And here's a much nicer quick overview
The fact that the 645Z footage tilted up smoothly in that video shows that it's perfectly happy with that level of movement. What throws it is spinning fans, which software wise it detects as a bump motion and it begins correcting for that. You could have hand held that tilt up and encountered the same issue.
If real physical movement sensors were being used then the camera would know that this area of the shot was not camera shake, and was not to be treated any differently from the initial tilt up movement part of the clip. There was no new/different bump or movement shake at that point, so the shake reduction should never have kicked in.
Comment by richandfleur posted on Anyone using their DSLR for video at 10/07/2014 - 21:36
a tripod ... you're not supposed to use SR on a tripod are you???
The case shown in this video is entirely software shake reduction generated.
When you see how many options there are for the warp stabiliser effect in Adobe Premiere, and how long it takes even on a grunty computer, you realise that software shake reduction on the fly is always going to be quite an ask.
Just thinking about it, if the stabilisation was done mechanically then presumably the loading on the processor would be less, in which case focus peaking during video recording, or higher bit rates etc would be a possible substitute
Comment by richandfleur posted on Anyone using their DSLR for video at 10/07/2014 - 09:54
Pentax video gets a bad press around here for sure. But there are links on here pointing to good quality examples
This system is in place in all modern Pentax bodies, from the K-30/50, K-01, K-3, 645Z, and Q - and it's a total embarrassment that is genuinely hurting the brand image. It's much worse than the K-5 series and older models with Video capability. Pentax has long traded on it's ability to stabilise any lens due to it's in body stabilisation, but several other brands have this now, and they actually use it during video recording too!
Comment by richandfleur posted on Anyone using their DSLR for video at 10/07/2014 - 03:49
The mistake I made was running my shutter too fast for the prop planes. So I would go with shutter priority at somewhere near the 200 mark for them
Good point to raise, it was a reminder to me, thanks!
Comment by richandfleur posted on Exposure Compensation at 07/07/2014 - 23:32


Thought I'd link to this as an example of the Video influence on digital cameras these days. IF you are going to include video in your product, then it is going to get reviewed. Therefore it's in your best interests to do a decent job of it!