mikew

Joined: 22nd October 2007

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

mikew
I have been ripping into other people's shots recently so here's a chance to tell me where I'm going wrong

Comment Image


35mm f2 can't recall the settings.

Mike

Comment by mikew posted on Fish and plenty of them at 05/11/2009 - 18:31

mikew
Er being 'honest' is my speciality .

So long as you feel you're growing through this exercise then it's all worthwhile!

Mike

Comment by mikew posted on lady in red at 05/11/2009 - 17:46

mikew
I agree about the softness which is possibly using the lens wide open or a less than rock solid tripod Were you shooting RAW of JPEG? Hoe did you fire the shutter - using the 2 second delay, remote or press the button?

Did you apply any sharpening after resizing? These images do need to be sharp (IMO of course!)

Mike

Comment by mikew posted on Truro cathedral looking up - commments please at 05/11/2009 - 17:21

mikew
No offence Don but I can't see this is using your skills to their best advantage. If you hadn't mentioned vampires etc. it would never have occurred to me but then I probably lack imagination

Mike

Comment by mikew posted on lady in red at 05/11/2009 - 17:16

mikew
Hmm, I got the impression it was a more informal use of 'crystal' so that it would include a chandelier with glass beads which isn't crystal and would probably exclude some more esoteric items that are crystalline (graphite?).

I was wondering what the truly hideous crystal wine glasses my Mother gave me were made of and what made them crystal glasses. I was thinking of using them in some way.

I assume most gem stones are crystal?

Mike

Comment by mikew posted on Comments: Weekly Competition # 122 - "Crystal" at 05/11/2009 - 08:54

mikew
The only question that matters is 'am I happy with the quality of the images I produce' and don't measure that by pixel peeping. Look at the photo and see if you're happy. If the focus is always off and it shows as it did with my 30mm f1.4 then do something about it - get another example of the lens or adjust. I wanted to use that lens so I invested the time. Otherwise I was happy with the performance of my lenses up to 12x16" prints so didn't bother.

Just take photos is the real answer and then address any issues as they arise

Pentax along with all other manufacturers must be aware of these issues and addressed them in the K20D/K7.

Mike

Comment by mikew posted on K200D AF Adjust - Yes, it works! at 05/11/2009 - 07:43

mikew
Hey guys why so few entries?

The topic is quite open.

Quote:
Mineral, Glass, Chandelier, to name a few. Over to you now people.
So let's get going here!

Mike

Comment by mikew posted on Comments: Weekly Competition # 122 - "Crystal" at 05/11/2009 - 07:38

mikew
chrissinkpen wrote:
Mike, thanks for the very good explanation. I had no idea about all this.
So either you adjust the body to suit one lens over another or live with the shortfalls that all lenses seem to have and live with the compromise.
So , I could set my camera to work best with my favourite lens? I dont know whether I fully understand yet:My two favourite lenses--55-300,FA50, if I get one to work at it's optimum, that will affect the other-correct?

Thanks for help so far
Chris
I fear that everything in life is a compromise and I can't recall what the figures were for my lenses but for all but the 17-50 they were all back focussing a bit and all improved after adjustment by varying amounts. I do use the motto - good enough is good enough - but I would still like the K20D's ability to have settings for 20 lenses!

Mike

Comment by mikew posted on K200D AF Adjust - Yes, it works! at 04/11/2009 - 14:21

mikew
Muggins wrote:
Good explanation Mike.

And dont forget that last but not least - you can send your body & lens to Sigma UK and they'll calibrate the lens to your specific body - FOR FREE if you're still in warranty. That way, you can do the AF Ajust to get it as close as possible for all the Pentax lenses, then send the body & lens off to Sigma to adjust the 30f1.4 to your body.

Fella at Sigma UK said it would only take about 2 weeks. Some dealers may even pay the shipping for you.
But if they calibrate the body to a lens then they'll potentially screw it up for the other lenses (I imagine). If they only adjust the lens then you're OK.

Comment by mikew posted on K200D AF Adjust - Yes, it works! at 04/11/2009 - 14:19

mikew
No - all lenses and bodies are built within acceptable tolerances that make them fit for the purpose but by no means perfect.

Let us say perfect is a zero value for lens and body.

The body in manufacture is allowed plus or minus 5 units as are the lenses as nothing is perfect.

Your body comes out +3 say. Within tolerance but not perfect.

You have one lens that is zero - ie spot on - it will probably look fine in practical use (I know my 35 mm f2 did) Boy and lens are +3

You have another lens that is -2 units. So on your body that gives 3-2=1 which would be even better and turn in excellent results. This is probably what happened with my Tamron 17-50 which was amazing.

But then you get a lens that is +4 which is within bounds but with your body is 3+4=7 and that is now sort of outside the ideal and may not work so well like my 30mm f1.4 did.

Now you have two lenses that are OK and one that isn't.

At this stage you do what muggins did and settle down to get the best compromise for the lenses that you use. Took me 3 hours to do 6 lenses and realise I could either have the 30mm 1.4 or the Tamron 17-50 but not both.

In adjusting for the 30mm lens I also improved the Pentax lenses I had, 35mm f2, 70mm ltd, 21mm ltd but the 50-200 wasn't so lucky and is a bit off but I barely use it.

I don't know if that helped but you do have to accept that all bodies and lenses will come off the line around the ideal but rarely hitting the exact value you'd want.

mike

Comment by mikew posted on K200D AF Adjust - Yes, it works! at 04/11/2009 - 13:39

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo