All Forum Comments
Comment by McGregNi posted on Mr. Kasunobu Saiki from Ricoh, Interview at 05/03/2015 - 21:07
Post the image Bruce with a description of how you took the shot and confirm the basic settings for us.
If it seems that the camera might need a test of its metering performance, then the white wall shot as Alan suggested it's a great idea ... There's been so many variables and confusion over how your images have been taken and with what settings, that I don't think there's yet any firm reason to suspect any metering fault.
Comment by McGregNi posted on K3...new thread...is it just me?...looks like.. at 05/03/2015 - 12:21
Comment by McGregNi posted on Pentax FF First Look? at 04/03/2015 - 19:18
I appreciate that the discussion on exif data was very detailed, and that is why I specificially deverted it off onto a different thread. But it was not 'off-topic' to your question .... we were trying to understand what custom image settings you were using in the absense of any input from yourself.
You didn't respond previously to my points about metering, so I'll say it again .... most of the images you've posted are very challenging in terms of their contrast and dynamic range. They mostly all have large areas of great brightness. If the camera light meter is seeing a lot of this very bright light (for example if you were pointing the camera upwards a little so that a lot of that light was being seen driectly by the camera) then this will result in the underexposure you're having.
In order to eliminate this possibility, I'd try to shoot a few frames of the exact same scene, firstly pointing the camera upwards to the brightness, then pointing it downwards to the darker areas for the next shot. The exposures should be quite different for each. Tell us what you did and post the results here. (When you press and hold the shutter button halfway to focus its probable that the exposure is being held as well).
Its great that you're keeping on trying ... we all here want people to get great results from their Pentax cameras. You've made the odd few comments, like this one
.... I took´all the advice switched off pretty much everything and have went to manual WB, and it seems my K3 is ok but needs an extra 2 or 3 stops on WB to provide good results.
.....
Comment by McGregNi posted on K3...new thread...is it just me?...looks like.. at 04/03/2015 - 16:06
Comment by McGregNi posted on Setting the DPI at 04/03/2015 - 11:15
When I do this by pulling the sliders around I find there is really quite a lot of control, easily enough to produce punch and print-ready output ... I'd say that plus 4 on the sharpness slider, and plus 2 or 3 on the fine sharpness' ones will give us something ready to print.
There's every possibility that out DSLR jpeg output can be made into ' point and shoot''.
Comment by McGregNi posted on To trade or not to trade at 03/03/2015 - 15:35
Comment by McGregNi posted on To trade or not to trade at 03/03/2015 - 13:58
This is presumably the cause of some confusion with newer DSLR users who see this contrast and perceive the DSLR to be not as good, or faulty even, than a point and shoot they are comparing with.
Comment by McGregNi posted on To trade or not to trade at 03/03/2015 - 13:47
We have that other thread about the K3 where the new owner seemed to be wanting ' point and shoot' type results from his very sophisticated DSLR. For me, I think of the green mode on my camera as ' point and shoot Mode' . The book I have on the k7 describes this green mode as ' the one you set when handing your camera to a complete novice for a few snaps'. In green mode there are almost no camera controls you can change, the decisions are entirely left up to the cameras brain. So this to me is the meaning of ' point and shoot', and even our big sophisticated DSLR's offer it ...(the ultimate versatile imaging machines )
Having said all that I haven't ever actually set the green mode! So I don't even know if its any good ... Maybe I should try it more, it might actually improve my photos
So, my question ... If ' point and shoot' is about automation and ease, would we not get the best results then from our DSLRs on green mode rather than a small sensor in a compact camera ... Or us there something about the very small cameras that must makes their auto output seem better?
Comment by McGregNi posted on To trade or not to trade at 03/03/2015 - 12:22
As with everything - the right tool for the job
Matt
Come on, really, how small does a camera need to be?
I agree with Bills warning above about IQ ... Go smaller than APS-C for sensor and I feel the compromises start to add up .
Comment by McGregNi posted on To trade or not to trade at 02/03/2015 - 17:27


(Apologies if its been posted before and I've missed it)
..... imaging-resource news ....link