I have completely solved the viewfinder Glare problem with my Pentax K-5, by fitting the Hoodman HoodEye.
From Amazon.co.uk, I purchased the Model HEYEC18G, this is for the CANON 10D, 20D,30D, 40D, 50D. 60D and all Rebel Models. This was sold by Amazon & supplied by Keene Electronics.
It took just 10 minutes work with a square ended file that has a safe edge, to modify the HoodEYE to obtain a perfect fit on the Pentax K-5.
The HoodEYE is pushed down over the viewfinder mounting rails and is locked into place by a locking tab that snaps into a secure locking position.
Some 1/32inch of material has to be removed from each side of the 'wings' that fit into the viewfinder mounting rails and the locking tab 'rail' also needs a few thou removed. I used a Dial Reading Vernier to accurately measure the work.
As the HoodEYE has to be fitted to the viewfinder at an angle, care has to be taken so that the Diopter adjuster is not dislodged.
I have completely solved the viewfinder Glare problem with my Pentax K-5, by fitting the Hoodman HoodEye.
From Amazon.co.uk, I purchased the Model HEYEC18G, this is for the CANON 10D, 20D,30D, 40D, 50D. 60D and all Rebel Models. This was sold by Amazon & supplied by Keene Electronics.
It took just 10 minutes work with a square ended file that has a safe edge, to modify the HoodEYE to obtain a perfect fit on the Pentax K-5.
The HoodEYE is pushed down over the viewfinder mounting rails and is locked into place by a locking tab that snaps into a secure locking position.
Some 1/32inch of material has to be removed from each side of the 'wings' that fit into the viewfinder mounting rails and the locking tab 'rail' also needs a few thou removed. I used a Dial Reading Vernier to accurately measure the work.
As the HoodEYE has to be fitted to the viewfinder at an angle, care has to be taken so that the Diopter adjuster is not dislodged.
It really is an easy job to fettle.
Best Regards,