jeallen01

Joined: 12th February 2009

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

jeallen01
BruceStrachan wrote:
Got one elsewhere..thanks..
Good for you - mind telling us which version it is, and how much you paid?

Comment by jeallen01 posted on WTB Sigma 50-500.. at 21/10/2020 - 23:11

jeallen01
Hardgravity wrote:
Metal fence spikes, not my favourite..

...managed to put one through a gas pipe a few years back...
OOPS! and might happen to "almost anyone" - but not here because there are no gas or other pipes (or cables) near the surface in our back garden, and they do "last" - as do the posts in them

Comment by jeallen01 posted on Another pointless thread at 17/10/2020 - 21:25

jeallen01
NB: ref using "gravel boards" for raised beds, from experience, I suggest:
- use posts at the corners and extra posts every 3ft/1m to prevent the boards bowing (some years ago, that was a good way of using old fence posts with bottoms that had rotted off - but this time I had to buy new posts and then cut them)
- put those posts into steel fence post "spikes" (the ones with bolts to be tightened are best) to stop the bottoms rotting off.

Costs a bit first time around, but should outlast my interest in vegetable gardening!

Comment by jeallen01 posted on Another pointless thread at 17/10/2020 - 16:31

jeallen01
LennyBloke wrote:
...is it my imagination or has the price of seeds, plants, etc. sky-rocketed ???

2 years ago I bought a mixed set of Raspberry canes (15) for well under £20 - I've just received an email from the same company offering a similar set for £35 - presumably this is part of Covidflation

I was also considering replacing my rather old and rickety raised beds with some new ones last year but put it off for another year - that was a mistake, the prices of sleepers, boards, etc are so high - I don't want to take out a mortgage to grow my fruit and veg

...Sorry for sounding so Grumpy
Canes: I bought some canes last year from our independent local garden centre, but this year they had straight willow "canes" that looked as good/better and were cheaper, so I bought a bought a bunch of those - and they're quite good.

Then, later on, I realised that the garden hazel tree had pretty straight branches that only needed to be cut down, stripped of leaves, and left in the garage to dry off a bit - so did a few of those, and will do some more when all the leaves have fallen off. Hope not to be buying any more canes as that hazel tree will grow a lot more new branches next year

Raised beds: over the last few years I rebuilt all (7!) raised beds, but used treated fencing "gravel boards" and lined the insides with builders' plastic dampproof course sheeting - that should last quite a few years, based on experience with the previous lot

Comment by jeallen01 posted on Another pointless thread at 17/10/2020 - 16:12

jeallen01
gtis wrote:
.....
I put a camera to catch the hedgehog feeding
At night and got 2 foxes instead
All my CCTV cameras ever get are urban foxes, and the local rats, which I had hoped that the foxes would have eliminated by now - but unfortunately not .

Comment by jeallen01 posted on Another pointless thread at 14/10/2020 - 20:35

jeallen01
Lubbyman wrote:
K10D wrote:
and heading deep south tomorrow.....
What? South of Watford Gap??

Steve
"Somehow", I don't think he'll venture that far South (unless he try's to avoid the rain for a day or two)

Comment by jeallen01 posted on Another pointless thread at 05/10/2020 - 20:41

jeallen01
ATM I've got a Canon Pixma TR8550 A4 MFP to replace the old Pixma 895 - bought in 2013 and used for occasional prints, but finally did get a clogged head in 2017. Both are/were 5 cartridge printers.

TBH, I preferred the prints from the 895 to those from the 8550 (which also doesn't have automatic double-sided copying!) as early prints from the latter showed some signs of banding but that seemed to "clear up" after a few prints.

Comment by jeallen01 posted on 'starter' printer recommendations at 05/10/2020 - 15:24

jeallen01
A point to remember: (IRC!) historically EPSON printers have a "history" of failing due to "clogging up" if not used very regularly and then being "unrepairable". OTOH, CANON printer heads do fail due "clogging up", but, AFAIK, quite a bit less often.
PS: that is also true in my own limited experience, having had printers of both brands "clogging up", but the CANON ones took an awful lot longer for that to happen.

Comment by jeallen01 posted on 'starter' printer recommendations at 04/10/2020 - 22:16

jeallen01
Gwyn wrote:
Not only do I no longer know what day of the week it is I don't know my east from my west anymore either
Look at your phone as that should tell you the day (and time) - and (with the right App) which is East and which is West

OTOH, I regularly have to "remind" SWMBO" of both

Comment by jeallen01 posted on Another pointless thread at 03/10/2020 - 21:50

jeallen01
I've rarely had AF issues with Sigma lenses as they usually "lock on" pretty quickly - then again, the comment about Sigma's "reverse engineering" approach is probably correct from what I have read.

IMHO, the biggest "issue" with Pentax DSLR AF is the consistent-across-the-range lack of "enough" AF focus points "across the frame" and the h/w "processing power" and good algorithms to control that "power".

Comment by jeallen01 posted on 'Best' AF Pentax DSLR? at 03/10/2020 - 21:43

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo