Isomi

Joined: 8th December 2010

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

Isomi
MattMatic wrote:
AFAIK, for external units the rear curtain sync setting is set on the flash!

So, if you are trying to set it using the menu on the camera it won't work
The AF360/AF540 have a slide switch that chooses rear curtain (it basically chooses which edge of the trigger to fire on).

So, if your external flash doesn't support Rear Curtain Sync, then I'm afraid you won't be able to do it!

HTH!
Matt
Ah, that would make more sense. If that's the case I might need to look at getting another flash...

Comment by Isomi posted on Rear curtain sync flash with K-5/K-7 at 07/02/2011 - 11:00

Isomi
Thanks for the info.

It doesn't make any sense though that it works at any speed in bulb mode with the built-in flash, but not with an external one.

Also, what's the point in pre-flash if I'm using manual metering as I am in bulb mode? Surely P-TTL doesn't apply in that case?

Comment by Isomi posted on Rear curtain sync flash with K-5/K-7 at 07/02/2011 - 10:59

Isomi
Hi all,

I'm having a bit of trouble getting rear curtain sync flash to work with my K-5 (I assume the K-7 works the same way).

Using the built-in flash it works fine (although I can't figure out how to avoid the pre-flash), but with an AF280T and an AF200S it will only fire once as the curtain opens. That's in all camera modes, and I've tried numerous combinations of flash settings.

Ultimately what I'm trying to do is get the flash to fire once, at the end of the exposure in bulb mode (preferably using the AF280T, although the AF200S would do as well).

Any ideas?

Many thanks,

Don

Comment by Isomi posted on Rear curtain sync flash with K-5/K-7 at 07/02/2011 - 08:48

Isomi
Algernon wrote:
Are you sure it's not just the tripod foot that's in the way?
That should come off as shown here (in Russian unfortunately) I think it will work with that removed, if not the extension tube should work,
because you only use these lenses within 5M and losing
infinity focus won't be a problem.

That's a very nice (and expensive) lens I nearly bought
one once, but backed out because the seller had bad feedback.
Ah, you're right, thanks! Now I just need to find the tiniest screwdriver in the world...

Comment by Isomi posted on M42 adapter for the K5 at 08/01/2011 - 17:16

Isomi
Well this was a bit of a pointless exercise. No matter how I use the adapter, the only M42 lens I have (Helios 40-2), won't fit the K5 anyway. The collar on the lens is so wide that it hits off the flash housing. It won't sit flush with the camera mount.

Oh well...

Thanks for the help anyway!

Comment by Isomi posted on M42 adapter for the K5 at 08/01/2011 - 12:29

Isomi
Algernon wrote:
I've got an old one from the 70's that came in a Pentax box.
The lettering was a bit different, but the the manufacture is
identical and made to very tight tolerances. The copies are not
to the same tolerances.
Bloody eBay!

Comment by Isomi posted on M42 adapter for the K5 at 07/01/2011 - 15:04

Isomi
SmutjeUK wrote:

Be very careful with that as if you bend it too far you may get problems of releasing the adapter from the camera as the spring plate may block then the mechanism!
Noted!

Comment by Isomi posted on M42 adapter for the K5 at 07/01/2011 - 15:03

Isomi
SmutjeUK wrote:
There may be one other possibility. There should be a spring like plate just next to the red spot. It is screwed in to the adapter. Make sure that this is there and that there is some 'spring' in it as without it you may get the symptoms you describe here.
Don't know why it works on your ME Super but it may be that the arrest mechanism on the camera has changed somewhat so that it will sit secure on the ME but not on the K-5 (quite a few years between them and it may just need some slight adjustment for the AF and all the other electric contacts that may influence the setting).
Hope that helps a bit.
Thanks, I'll check that when I get home. The spring/plate is definitely there but I might try bending it out slightly.

Comment by Isomi posted on M42 adapter for the K5 at 07/01/2011 - 14:55

Isomi
It was second hand so just arrived in a jiffy bag, but it looks identical to the official one and says Pentax Japan on it.

Exactly the same as this photo:

http://www.srsmicrosystems.co.uk/156/Pentax-Mount-Adapter-K.html

It was purchased from someone who was selling a load of old 35mm kit, so maybe it's a slightly different older version. Weird.

Comment by Isomi posted on M42 adapter for the K5 at 07/01/2011 - 14:53

Isomi
gartmore wrote:
Are you attaching it by the correct method?

Screw it onto the lens before attaching to the camera, remove by unscrewing lens then unclip and remove the adapter.
No, I've been attaching it to the body then screwing the lens into it.

I'll try your method and see how that goes, thanks.

Either that or I have a fake. I did buy it from eBay but it looks like the real deal and it was from a reputable seller.

I just don't understand why it fits the ME Super perfectly and not the K5 (and this is the 2nd K5 I've had so there's definitely nothing wrong with it).

Comment by Isomi posted on M42 adapter for the K5 at 07/01/2011 - 13:47

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo